Mike's Journal

KaienZ34 · 03-29-2013, 11:51 AM

Thanks mike, repped.

KaienZ34 · 03-29-2013, 12:55 PM

Did it leave any glue residue on the piant when you peeled it off the car?

Mike · 03-29-2013, 08:58 PM

no, it leaves no residue. I can use it on top of cured powdercoat, throw another layer of coating over it, cure it and peel it off with no residue.

KaienZ34 · 03-29-2013, 09:49 PM

Mike · 04-13-2013, 07:17 PM

So,
Just did Daytona, what an awesome track! But my 3rd lap of my first session, when I got up over 150 on the banking, my wing failed. The outer edges where there is more angle, actually bent down, about 10" and contacted the side of the car at the bottom of the brake lights. Once slowed it came back up, but its all cracked up. So, I had to remove it for the rest of the 2 day event, and really wasn't comfortable up above 140.

APR is having me send it back so they can figure out what happened and see if they can do any design work to prevent it, but they haven't seen a failure like this before. They are also building me a new one and replacing it for me. Stuff happens, but they have top notch customer service. I heard back from them within about 2 hours of emailing them pictures.

I think it was a combo of the higher speed and high g loading of the banking. The next session, my aluminum undertray managed to almost fall off, but that was fixable with a quick trip to home depot for bolts.

where it contacted the car, I thought someone hit my car with a jackstand or something, til I realized it was on both sides:

SPOHN · 04-13-2013, 07:21 PM

Even though this shouldn't be an issue, do you think if the bracing was wider it would help?

Mike · 04-13-2013, 07:24 PM

Quote:

Originally Posted by SPOHN

Even though this shouldn't be an issue, do you think if the bracing was wider it would help?

no, we discussed that on the phone and they said the current spacing should be adequate.

KaienZ34 · 04-13-2013, 07:31 PM

Damn mike that sucks.

Rusty · 04-13-2013, 07:45 PM

Quote:

Originally Posted by KaienZ34

Damn mike that sucks.

Really!

Mike · 04-13-2013, 07:53 PM

Actually, I'm happy it contacted the car. I don't mind the scraping so much, since its a track only car, and that may have saved my life. If the entire thing would have departed at those speeds, I don't know what the result would have been, but probably not pretty. I'm just going to cut a couple black vinyl circles and put them over the damage.

GaleForce · 04-13-2013, 10:45 PM

Wow! That's crazy!

Glad you're ok and didn't suffer much more than some paint damage and dings. It's also great to hear about APR standing behind their product.

SS_Firehawk · 04-13-2013, 10:47 PM

I keep wondering back to this page because that is just nuts. Almost difficult to believe.

Zoren 370 · 04-14-2013, 01:16 AM

Quote:

Originally Posted by KaienZ34

Mike, i'm looking for that clear-ish painter style tape you used on your wife's Z4 that time you took it to the track. I don't want to use blue painters tape if i can help it.

Just want to chime in you can also check this one: I presume you want to use it for the track.

Products

KaienZ34 · 04-14-2013, 08:24 AM

Quote:

Originally Posted by Zoren 370

Just want to chime in you can also check this one: I presume you want to use it for the track.

Products

Some what, but mostly for the long trip to and from ZdayZ.

HKYStormFront · 04-14-2013, 10:42 AM

o.O

03-29-2013, 11:51 AM	#451 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Thanks mike, repped. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-29-2013, 12:55 PM	#452 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Did it leave any glue residue on the piant when you peeled it off the car? __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-29-2013, 08:58 PM	#453 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	no, it leaves no residue. I can use it on top of cured powdercoat, throw another layer of coating over it, cure it and peel it off with no residue. KaienZ34 likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-29-2013, 09:49 PM	#454 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	__________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

04-13-2013, 07:17 PM	#455 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	So, Just did Daytona, what an awesome track! But my 3rd lap of my first session, when I got up over 150 on the banking, my wing failed. The outer edges where there is more angle, actually bent down, about 10" and contacted the side of the car at the bottom of the brake lights. Once slowed it came back up, but its all cracked up. So, I had to remove it for the rest of the 2 day event, and really wasn't comfortable up above 140. APR is having me send it back so they can figure out what happened and see if they can do any design work to prevent it, but they haven't seen a failure like this before. They are also building me a new one and replacing it for me. Stuff happens, but they have top notch customer service. I heard back from them within about 2 hours of emailing them pictures. I think it was a combo of the higher speed and high g loading of the banking. The next session, my aluminum undertray managed to almost fall off, but that was fixable with a quick trip to home depot for bolts. where it contacted the car, I thought someone hit my car with a jackstand or something, til I realized it was on both sides: __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-13-2013, 07:21 PM	#456 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Even though this shouldn't be an issue, do you think if the bracing was wider it would help? __________________

04-13-2013, 07:31 PM	#458 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Damn mike that sucks. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

04-13-2013, 07:53 PM	#460 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Actually, I'm happy it contacted the car. I don't mind the scraping so much, since its a track only car, and that may have saved my life. If the entire thing would have departed at those speeds, I don't know what the result would have been, but probably not pretty. I'm just going to cut a couple black vinyl circles and put them over the damage. GaleForce likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-13-2013, 10:45 PM	#461 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Wow! That's crazy! Glad you're ok and didn't suffer much more than some paint damage and dings. It's also great to hear about APR standing behind their product. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-13-2013, 10:47 PM	#462 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I keep wondering back to this page because that is just nuts. Almost difficult to believe. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

04-14-2013, 10:42 AM	#465 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	o.O __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wstar's Journal	wstar	Member's 370Z Gallery	865	12-28-2019 10:15 AM
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 10:39 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 02:58 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-23-2009 12:42 AM