Megan Journal

synolimit

How thick are you making these parts? I want to make some canards and on ebay for a 12x48" panel I see 1.5mm, 2.6mm, 3.5mm and 4.4mm. I'm thinking 2.6mm should be what apr uses and strong enough.

__________________
13 370z-

Megan370z

It varie between 1/16 to almost 1/4''

the rear bumper skin is a 3 layer and some reinforcement at the sharp edge.
its very close to 1/16 *very flexible*

the front side large panel are 4 layers of (7oz / 9oz / 12oz/ 9oz ) which give about 1/8'' * haven't measured* *quite strong panel*

the rear large quarter panels are made with the same layer as the front side panel ( 4 layers )

the rear lower winglets are 3 layer ( 9oz /12oz/9oz ) and 2 extra layer of 12oz each at the mounting flange thickness goes from about 1/8 to almost 1/4 at the flange

those 90deg 1x1'' are 2 layer of 12oz. ( about 1/16 ) (half weight from the same L beam in Aluminium. )

the long L parts 5''x2'' are 2 layers of 12oz and a renforcement of another 12oz at the bent edge (1/16 to almost 1/8)



as far as your canard size ... I have a small plate that I kept which mesure .095'' , its quite stiff and should be good for that application (I guess ) if you go with that 2.6mm ( .102'')

im still new in the CF stuff...

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*