|
Hmmm, that and they make a specific model for the AT carrier may push me over the edge to just getting the Cusco (I was already on the fence). That
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
03-20-2014, 07:30 PM
|
#316 (permalink) |
|
A True Z Fanatic
 
Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3594   |
Hmmm, that and they make a specific model for the AT carrier may push me over the edge to just getting the Cusco (I was already on the fence). That means I don't have to go shop for a new MT housing, I can just buy LSD + gears (+bearings, + oil seals?) and swap it out in my existing pumpkin.
|
|
|
03-23-2014, 07:50 PM
|
#317 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Weekend Update !
It was a very slow week and weekend, I guess I was a bit tired of working on the car the week before in the cold from -20 to +3 Celsius and almost 8 to 12 hours a day (with break time of course) For the skeptic here we go with the main part of the rear right quarter panel. It weight in at 2 lbs 14.5 oz. Almost done! Some trimming left and then a final epoxy coating + clear coat.  
Last edited by Megan370z; 04-05-2014 at 08:41 PM. |
|
|
|
03-25-2014, 08:25 AM
|
#320 (permalink) |
|
A True Z Fanatic
Join Date: Sep 2009
Location: Mod Capital of Canada
Age: 57
Posts: 7,354
Drives: cars. lots of cars.
Rep Power: 40182 |
Get this done before posting season!!!
__________________
 H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal |
|
|
|
03-29-2014, 12:09 AM
|
#321 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Be careful there is Porn being posted down below !!
yeah you read correctly,,, its some cloth Carbon Fiber Porn !!! I hope you like it  There is; - two 3k 2x2 Twill cloth - one 12k plain T700 - one 12k biaxial 45-45deg T700   It took about an hour to do a paper fender template to cut all of the CF layer needed for the job. Then another 3 hours of hand lay up with a slow hardener... I should have bought a fast one on my last order   
Last edited by Megan370z; 04-05-2014 at 08:39 PM. |
|
|
|
04-05-2014, 09:24 PM
|
#323 (permalink) |
|
A True Z Fanatic
Join Date: Feb 2009
Location: Orange County, CA
Posts: 3,503
Drives: C63 AMG - LSD
Rep Power: 650 |
I wish I had the skills, time, money, and motivation to do this. Somebody is gonna be a lucky f*ck when you decide to sell it to move onto something else.
__________________
|
|
|
|
04-12-2014, 11:53 PM
|
#326 (permalink) | |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Quote:
before I do something else in the inner fender I will finish the rest of the car .. its taking too long now I originally planned to be done by the end of April / beginning of May. this is what the current inner fender look like at this moment. 
Last edited by Megan370z; 04-12-2014 at 11:56 PM. |
|
|
|
|
04-18-2014, 11:11 PM
|
#327 (permalink) |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Carbon Fiber Party !
 on a more serious note. The left quarter panel has been started a last Monday & Tuesday if I remember correctly but I haven't touched it since then because I started making CF panel and parts for this Aero Project. I got to order more !!! yup again ;/ unfinished parts... 
|
|
|
|
04-22-2014, 05:20 AM
|
#329 (permalink) |
|
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
How thick are you making these parts? I want to make some canards and on ebay for a 12x48" panel I see 1.5mm, 2.6mm, 3.5mm and 4.4mm. I'm thinking 2.6mm should be what apr uses and strong enough.
__________________
13 370z- |
|
|
|
04-22-2014, 06:54 AM
|
#330 (permalink) | |
|
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Quote:
the rear bumper skin is a 3 layer and some reinforcement at the sharp edge. its very close to 1/16 *very flexible* the front side large panel are 4 layers of (7oz / 9oz / 12oz/ 9oz ) which give about 1/8'' * haven't measured* *quite strong panel* the rear large quarter panels are made with the same layer as the front side panel ( 4 layers ) the rear lower winglets are 3 layer ( 9oz /12oz/9oz ) and 2 extra layer of 12oz each at the mounting flange thickness goes from about 1/8 to almost 1/4 at the flange those 90deg 1x1'' are 2 layer of 12oz. ( about 1/16 ) (half weight from the same L beam in Aluminium. ) the long L parts 5''x2'' are 2 layers of 12oz and a renforcement of another 12oz at the bent edge (1/16 to almost 1/8) as far as your canard size ... I have a small plate that I kept which mesure .095'' , its quite stiff and should be good for that application (I guess ) if you go with that 2.6mm ( .102'') im still new in the CF stuff... Last edited by Megan370z; 04-22-2014 at 06:57 AM. |
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| MEGAN RACING: SS Downpipes! | G&M Performance | Drivetrain/Engine | 8 | 07-25-2011 01:50 PM |
| Megan Drift CBE - my 2 cents | Vince's Red-Z | Intake/Exhaust | 14 | 02-26-2011 08:51 PM |
| Megan Racing Exhaust | tyler20c | Intake/Exhaust | 3 | 01-07-2011 01:59 PM |
238Likes
Linear Mode
