Megan Journal

Megan370z · 03-14-2014, 01:33 PM

Quote:

Originally Posted by SPOHN

That wing is so ugly. Take it off and ship it to me. It would look so good on my car instead.

Yup you are right. It would look and perform awesome on your Z !!
I doubt you actually want to spend $$$ on another wing...
it suck because I have my eyes on a nice swan neck wing that would fit nicely on the back of Megan

I just need to comeup with money !!! It wont be this year

The reason why I actually want to switch is that the wing is getting a bit small for the future plans

sixpax · 03-14-2014, 01:58 PM

Quote:

Originally Posted by Megan370z

Yup you are right. It would look and perform awesome on your Z !!
I doubt you actually want to spend $$$ on another wing...
it suck because I have my eyes on a nice swan neck wing that would fit nicely on the back of Megan

I just need to comeup with money !!! It wont be this year

The reason why I actually want to switch is that the wing is getting a bit small for the future plans

love the Kognition ... they are making one for me right now should have it in about 10 days

have you checked with him to get a wider one ? or would it be a totally different maker ?

Megan370z · 03-14-2014, 02:45 PM

Quote:

Originally Posted by sixpax

love the Kognition ... they are making one for me right now should have it in about 10 days

have you checked with him to get a wider one ? or would it be a totally different maker ?

Well I did but not for the same style on wing

...

sixpax · 03-14-2014, 03:53 PM

Quote:

Originally Posted by Megan370z

Well I did but not for the same style on wing

...

I see ... how is the finish holding up on your wing anyway ? Had it on about two years ?

SPOHN · 03-14-2014, 04:22 PM

Quote:

Originally Posted by Megan370z

Yup you are right. It would look and perform awesome on your Z !!
I doubt you actually want to spend $$$ on another wing...
it suck because I have my eyes on a nice swan neck wing that would fit nicely on the back of Megan

I just need to comeup with money !!! It wont be this year

The reason why I actually want to switch is that the wing is getting a bit small for the future plans

What? Anymore downforce it will pull up the asphalt. But I will be getting a new wing sometime. The one I have is cheap. I want a rear mounted one to the frame like you see on the GTR without the cost.

Megan370z · 03-14-2014, 05:16 PM

Quote:

Originally Posted by sixpax

I see ... how is the finish holding up on your wing anyway ? Had it on about two years ?

Nothing like a very light sanding and a new coat of clear it will be like new

Im changing all of the bolts for some round head since the old one rusted

im also going to make some different sized endplate in CF since that first wing came with an alluminum plate that weight 3/4 lbs!!! Each.

Megan370z · 03-14-2014, 05:20 PM

Quote:

Originally Posted by SPOHN

What? Anymore downforce it will pull up the asphalt. But I will be getting a new wing sometime. The one I have is cheap. I want a rear mounted one to the frame like you see on the GTR without the cost.

Dont worry I will take as much downforce as I can

For those that think itz overkill for an N/A setup because more downforce is also more drag.
I totally agree with that....

im not building the aero kit for Megan with the current power in mind but I will have to deal with it for 2014.

sixpax · 03-14-2014, 05:38 PM

Quote:

Originally Posted by Megan370z

Nothing like a very light sanding and a new coat of clear it will be like new

Im changing all of the bolts for some round head since the old one rusted

im also going to make some different sized endplate in CF since that first wing came with an alluminum plate that weight 3/4 lbs!!! Each.

The end plates now are carbon ... really light

URA · 03-14-2014, 06:32 PM

can you share part numbers for the metric tee for abs delete?

Megan370z · 03-14-2014, 07:32 PM

Quote:

Originally Posted by URA

can you share part numbers for the metric tee for abs delete?

I cant be that specific after this long...
what could help you is I bought everything from summit racing and Jegs...

Megan370z · 03-16-2014, 01:13 AM

I now remember why I never continued into any bodywork job in my younger age... damn I hate doing that stuff !!!

For the pass week, I've been working in the garage and it seem like I haven't done much !

- rear right quarter panel is now made, it just need some finishing up the edges, adding reinforcement and brackets for the side panel.
- New suspension in, which took almost a day because I had a damn headache !
- The AP BBK is removed for rebuilt and resurfacing in the next few weeks.
- Almost done with all of the diffuser bracket.
- The rear bumper cover is nearly done installing, I couldn't finish since I left a tool at home ! ;/

and then this

this is the first part of a 2 pieces mold

FuTuRe is Z · 03-17-2014, 03:50 PM

That's incredible that you're capable of doing your own body work and fabrication, kudos.

Megan370z · 03-17-2014, 06:04 PM

Quote:

Originally Posted by FuTuRe is Z

That's incredible that you're capable of doing your own body work and fabrication, kudos.

no kidding, thanks

I love doing everything myself the only problem is I dont always have the right tools for the job, which suck !
There is soo much more I could do, its all about money in the end.

I cant fabricate anything to sell to make money ,, no body like having race car parts ,, right ?
still have the whole exhaust setup for sale

wstar · 03-20-2014, 06:47 PM

Hey, I was looking at Cusco's LSD stuff, looks like they all specify they're meant as replacements for VLSD on the cusco-usa site here: Vehicle Results . Does that mean these work with the existing unequal-length stub axles from the VLSD?

Megan370z · 03-20-2014, 07:11 PM

Quote:

Originally Posted by wstar

Hey, I was looking at Cusco's LSD stuff, looks like they all specify they're meant as replacements for VLSD on the cusco-usa site here: Vehicle Results . Does that mean these work with the existing unequal-length stub axles from the VLSD?

yup..

Cusco LSD re-use your VLSD stub axles .. which are the unequal-length

03-16-2014, 01:13 AM	#311 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	I now remember why I never continued into any bodywork job in my younger age... damn I hate doing that stuff !!! For the pass week, I've been working in the garage and it seem like I haven't done much ! - rear right quarter panel is now made, it just need some finishing up the edges, adding reinforcement and brackets for the side panel. - New suspension in, which took almost a day because I had a damn headache ! - The AP BBK is removed for rebuilt and resurfacing in the next few weeks. - Almost done with all of the diffuser bracket. - The rear bumper cover is nearly done installing, I couldn't finish since I left a tool at home ! ;/ and then this this is the first part of a 2 pieces mold wheee! likes this. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me Last edited by Megan370z; 04-05-2014 at 08:42 PM.

03-17-2014, 03:50 PM	#312 (permalink)
FuTuRe is Z Enthusiast Member Join Date: Nov 2013 Location: CT Posts: 263 Drives: 2014 370z Rep Power: 12	That's incredible that you're capable of doing your own body work and fabrication, kudos. Megan370z likes this.

03-20-2014, 06:47 PM	#314 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Hey, I was looking at Cusco's LSD stuff, looks like they all specify they're meant as replacements for VLSD on the cusco-usa site here: Vehicle Results . Does that mean these work with the existing unequal-length stub axles from the VLSD? __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MEGAN RACING: SS Downpipes!	G&M Performance	Drivetrain/Engine	8	07-25-2011 01:50 PM
Megan Drift CBE - my 2 cents	Vince's Red-Z	Intake/Exhaust	14	02-26-2011 08:51 PM
Megan Racing Exhaust	tyler20c	Intake/Exhaust	3	01-07-2011 01:59 PM

03-14-2014, 06:32 PM	#309 (permalink)
URA Base Member Join Date: Dec 2013 Location: NJ Posts: 45 Drives: 370Z Sport BLK Rep Power: 12	can you share part numbers for the metric tee for abs delete?