Megan Journal

synolimit · 02-01-2014, 08:55 PM

Quote:

Originally Posted by Megan370z

From Master Cylinder:
2x 12mmx1 Metric to -3an Adapter Male
2x -3an Teflon hoses 10" and 18"

Front Brake Circuit:
1x -3an male to 10mmx1 male adapter
1x 3 way Tee 10mx1 Bubble flares adapter

Rear Brake Circuit:
1x Wilwood Brake proportioning valve 1/8NPT fitting
1x Wilwood remote brake bias adjusting cable
2x -3an male to 1/8" NPT adapter
1x -3an Teflon hose 6"
1x -3an male to 10mmx1 male adapter
1x 3 way Tee 10mx1 Bubble flares adapter

This is what I used.

So doing this and leaving the module plugged in deletes the ABS, leaves the speedo working, keeps 70/30 braking, and no chance of ice mode?

Megan370z · 02-01-2014, 09:21 PM

Quote:

Originally Posted by synolimit

So doing this and leaving the module plugged in deletes the ABS, leaves the speedo working, keeps 70/30 braking, and no chance of ice mode?

doing this;
- will delete the ABS function
- Speedometer will work
- you will be able to adjust Brake bias
- You will not get Ice-mode but you might lockup your wheel depending how aggressive you are on the brake.

btw you can un-assemble the ABS module and just keep the electronic part of it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MEGAN RACING: SS Downpipes!	G&M Performance	Drivetrain/Engine	8	07-25-2011 12:50 PM
Megan Drift CBE - my 2 cents	Vince's Red-Z	Intake/Exhaust	14	02-26-2011 07:51 PM
Megan Racing Exhaust	tyler20c	Intake/Exhaust	3	01-07-2011 12:59 PM