ur either getting cams or Momentum headers?
|
|
LinkBack | Thread Tools | Display Modes |
03-11-2013, 07:30 PM | #123 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
no one got it yet ! hehe I will post some picture by next weekend
btw another important part that I must get is the damn 6MT driving shaft ! I found one online at 400$ delivered . not bad the 7at driving shaft was about 2-3'' shorter once installed with the 6MT |
03-13-2013, 08:52 PM | #124 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
another update !
I havent done much yesterday other than to bolt an OEM catback to avoid some complain about the noise ! and to look how the idle was. As I expected, the engine was running extremely rich ! 10.25-10.5 AFR on my first try I got it very close ! but I couldnt do much as I dont have the radiator connected yet ! I only did 2 start of about 30 sec Today I continued one of many projects going on ! Remember the car will be mostly used for the track as a lot of streetability of the car has been and will be removed. There is still a lot to be done but its a start ! I finished the radiator mount earlier today disregard the oem intake since I wanted to have mostly everything stock for the first idle & low load tune. |
03-26-2013, 09:19 PM | #125 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Small Update !
The radiator setup has been completed a few days ago ! I will post a picture of the final result when ever I get the chance There is just a small issue that piss me off ... the HR ECU control differently the fan control module than the 370z ECU. which mean im stuck to order an aftermarket variable fan control unit. Right now, a manual switch is installed ... Today I installed the RJM clutch pedal assembly with the Wilwood master cylinder. Wasnt too hard but there is still some adjustement to be done. Remember the Z had a 7AT ? hehe |
03-26-2013, 10:17 PM | #127 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Well I have quite a few problem to deal with right now ....
- adding a variable fan control unit - fixing the back-up light... I must have welded the wrong wire - I must finish the ABS delete and plug that brake bias panel - there wasnt any live tuning with cipher the last time I tried I hate doing it thru the Rom editor The ilde isnt too bad . It was around 10 AFR !!!! - doing a front top support for the bumber attachement since the oem component has been removed Because of a V-mount type radiator setup which mean there will be a big hole in the hood at some point - finishing the oil cooler lines with the Accumulator that will be temporaly inslled on the passenger side (An enclosed box will be made later on this summer . I received my Tig welder today !!! - mid-april is the installation of the anti fuel starvation unit - once all of this has been completed I will do a road test but the car need a safety done first . There isnt any emission control here so im good for that part . The garage where I plan to go told me I didnt had to have the airbag in so as long as I dont have an exhaust leak its gonna be alright |
03-29-2013, 02:08 PM | #128 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
ABS delete has been completed !!
Now I hope it wont leak....... lol Edit; I bleeded everything and put pressure on the system . I have not seen any leak !! Yeah me... Last edited by Megan370z; 03-29-2013 at 05:21 PM. |
03-29-2013, 05:19 PM | #130 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Its hard to tell because a few week ago I was expecting to be able to start driving by mid-april... right now its more around the end of april.
I need to re-order some stuff that I didnt think about.. Remember in the beginni g when I blew the engine I mentionned it should be done by June 2013 !! Somehow its gonna probably be sonner !!! Im leaving for the weekend tomorrow so im gonna try to get the Accumulator connected |
04-07-2013, 04:01 PM | #131 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Woot ! Megan finaly decided to start with the OEM push-start switch !!
My bad though, because I discovered after going back in the wiring setup that one of the wire wasnt getting any power as it should have with the neutral-position switch the 6MT has, instead of the 7AT which probably is energized by the tranny itself. Next problem now!!! -Back-up light Oh by the way the accumulator has been fully installed yesterday |
04-07-2013, 07:01 PM | #132 (permalink) |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
this isnt the final setup ! dont worry the coolant reservoir will be relocated !
The oil cooler is not be installed at the usual spot because its soo big ! It was supposed to be my new oil cooler for the VHR but now it is overkill on the HR setup.. !!! I had to adjust with it ! Accumulator installed temporaly. There is a manual valve instaled on the right side of the center console ! Not pretty but the project keep going. |
04-07-2013, 08:15 PM | #134 (permalink) |
Premium Member
Join Date: Oct 2011
Location: Tampa
Posts: 4,142
Drives: 13' Magma Red Nismo
Rep Power: 7335 |
LMFAO awesome, this has to be the most polarizing set of pics. Everything is gutted, and then I see the nav and stereo.
__________________
Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI
New Car: Under Construction |
04-07-2013, 08:25 PM | #135 (permalink) | |
A True Z Fanatic
Join Date: Oct 2009
Location: Canada
Posts: 1,156
Drives: 370z
Rep Power: 24 |
Quote:
well the car will still be driven on the street for 2013 . Anyway its not like that 15lbs will make any difference , im not doing any pro-race. |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
MEGAN RACING: SS Downpipes! | G&M Performance | Drivetrain/Engine | 8 | 07-25-2011 01:50 PM |
Megan Drift CBE - my 2 cents | Vince's Red-Z | Intake/Exhaust | 14 | 02-26-2011 08:51 PM |
Megan Racing Exhaust | tyler20c | Intake/Exhaust | 3 | 01-07-2011 01:59 PM |