Megan Journal

Megan370z · 12-19-2012, 06:05 AM

Quote:

Originally Posted by NitrousZ34

I checked out your dyno sheets that you posted and you gained 7hp from just boring out your TB's correct? Or was that combined with your ported manifold? My question is what other mods did you have on the car when you had it dynoed with JUST the ported TB's. I would just like to know the gains of those without any other mods. Also, is there any better throttle response from doing that, that you have noticed? Thanks for your replies

the gain of 7-9whp is with this
Custom straight flow exhaust w/ Xpipe
PPE step header
custom CAI (similar to the stillen V3)

but it was also seen when I had the stillen shorty + test pipe over a year ago.

the gain has been seen on both intake manifold
my first attemp to port the HR manifold was only to smooth the edge of inside the intake runner when they glue the base to the intake manifold.
the VHR was modified yesterday.

as far as throttle response , my answer would be it was unchanged.

NitrousZ34 · 12-20-2012, 02:14 AM

Quote:

Originally Posted by Megan370z

the gain of 7-9whp is with this
Custom straight flow exhaust w/ Xpipe
PPE step header
custom CAI (similar to the stillen V3)

but it was also seen when I had the stillen shorty + test pipe over a year ago.

the gain has been seen on both intake manifold
my first attemp to port the HR manifold was only to smooth the edge of inside the intake runner when they glue the base to the intake manifold.
the VHR was modified yesterday.

as far as throttle response , my answer would be it was unchanged.

ok cool! One last question I just want to make sure im clear on this. Did you dyno the car with the first 3 mods listed, get a xxx.xrwhp number and then dyno it AGAIN after you ported the TB's? Sorry for all the questions, I just want to make sure I know what you did and what agins are made with what. Thanks for the replies bud

Megan370z · 12-20-2012, 02:23 AM

Quote:

Originally Posted by NitrousZ34

ok cool! One last question I just want to make sure im clear on this. Did you dyno the car with the first 3 mods listed, get a xxx.xrwhp number and then dyno it AGAIN after you ported the TB's? Sorry for all the questions, I just want to make sure I know what you did and what agins are made with what. Thanks for the replies bud

I have 4 TBs

those that I had with my spare HR engine which where modified and the un modified VHR TB that were also used

yeah those test was done back to back , same day , within an hour with a previously tuned map for each component for a proper AFR

I also went on the dyno after every mods to be certain that was giving power...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MEGAN RACING: SS Downpipes!	G&M Performance	Drivetrain/Engine	8	07-25-2011 12:50 PM
Megan Drift CBE - my 2 cents	Vince's Red-Z	Intake/Exhaust	14	02-26-2011 07:51 PM
Megan Racing Exhaust	tyler20c	Intake/Exhaust	3	01-07-2011 12:59 PM