Megan Journal

Megan370z · 12-18-2012, 06:56 AM

Quote:

Originally Posted by NitrousZ34

Did you ever do any before and after testing of your TB's? I'm curious to know how much of a difference that would make on the streets during WOT with supporting mods

Yup I have done 2 tests at 2 different occasions on a dyno.
I have a dynosheet of the last time that I tested it duing my Dyno Day test in my Picture Album
I remember that day I did test the HR intake manifold VS VHR intake manifold & Oem TB Vs my custom TB.

Quote:

Originally Posted by GaleForce

Guess I know who to call when I want to build a motor.

Good job!

thanks,
the problem with this is what if I mess up your engine by mistake. ;(
This is my first time working like this on an engine
Im gonna have to see if my engine will hold or blow !!! hehe

GaleForce · 12-18-2012, 08:13 AM

Quote:

Originally Posted by Megan370z

Yup I have done 2 tests at 2 different occasions on a dyno.
I have a dynosheet of the last time that I tested it duing my Dyno Day test in my Picture Album
I remember that day I did test the HR intake manifold VS VHR intake manifold & Oem TB Vs my custom TB.

thanks,
the problem with this is what if I mess up your engine by mistake. ;(
This is my first time working like this on an engine
Im gonna have to see if my engine will hold or blow !!! hehe

Ok, we'll see if your engine holds before you build another.

Megan370z · 12-18-2012, 11:27 AM

I spend the morning doing some port match on the intake runner / lower intake manifold

With all the time spent on this , I hope the result will be worth it !!

this picture is to show the unmodified intake runner
you can also see a little bit the lower part of the intake manifold arent alligned perfectly with the actual intake runner

do I need to explain how bad this is ?
I hope those Nissan engineer didnt do this on purpose !.

after some dremel work !

This VHR intake manifold, you guys will see it back sometimes next year !
Its still under construction but not a priority right now.

12-18-2012, 11:27 AM	#3 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	I spend the morning doing some port match on the intake runner / lower intake manifold With all the time spent on this , I hope the result will be worth it !! this picture is to show the unmodified intake runner you can also see a little bit the lower part of the intake manifold arent alligned perfectly with the actual intake runner do I need to explain how bad this is ? I hope those Nissan engineer didnt do this on purpose !. after some dremel work ! This VHR intake manifold, you guys will see it back sometimes next year ! Its still under construction but not a priority right now. Nut_N_Much likes this. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MEGAN RACING: SS Downpipes!	G&M Performance	Drivetrain/Engine	8	07-25-2011 12:50 PM
Megan Drift CBE - my 2 cents	Vince's Red-Z	Intake/Exhaust	14	02-26-2011 07:51 PM
Megan Racing Exhaust	tyler20c	Intake/Exhaust	3	01-07-2011 12:59 PM