Megan Journal

Megan370z · 02-06-2014, 03:28 PM

Quote:

Originally Posted by Masterbeatty

Have you thought about making a functional rear diffuser now since you have the room with the exhaust you made?

oh yeah I thought about something

if I have enough skill it gonna be quite crazy !!!

I'm finishing with that single exit overlay then I start that project which include a surprise.
I've been sick for the pass week so its not moving fast....
The car is in a non heated garage so again it doesn't make the process very fast....

I need a good job in the US... hehe
whos hiring at minimum 75k /years ? hehe

Masterbeatty · 02-06-2014, 08:38 PM

I two do not have a heated garage here in ct, just a covered carport. I have a template made up for a rear diffuser but it's been snowing like crazy so I can't do anything. I did some scale tests with the one I made but my biggest issue is my damn muffler, the only way it would fit is with a 12 degree angle which is too much. I thought about getting turn downs just before the rear axle but I think it might be too loud for the local tracks. My plan is to make it out of FRP then maybe a CF version after I figure out how to make a mould. That rear end is going to be bitchen when finished.

SPOHN · 02-08-2014, 12:18 PM

Meg, can you be so polite to post another pic of your ABS delete with the proportioning valve? Like to get an idea of location of plumbing.

Luciano13 · 02-08-2014, 01:30 PM

Awesome mold Megan

Megan370z · 02-08-2014, 02:01 PM

Quote:

Originally Posted by SPOHN

Meg, can you be so polite to post another pic of your ABS delete with the proportioning valve? Like to get an idea of location of plumbing.

no problem Spohn

Im not sure if you already saw this one but if you need a different camera angle, let me know.

SPOHN · 02-08-2014, 05:42 PM

Big props man. I have two track days in the next four weeks but after those I will start on this. Looks pretty simple.

Did you have to experiment with the rear bias or do you have any recommendations where to set the proportioning valve?

Megan370z · 02-08-2014, 08:15 PM

Quote:

Originally Posted by SPOHN

Big props man. I have two track days in the next four weeks but after those I will start on this. Looks pretty simple.

Did you have to experiment with the rear bias or do you have any recommendations where to set the proportioning valve?

I think from what I remember, I installed the proportional valve set in the middle of its adjustment, then soon after while driving I gave a bit more to the front with the adjustment cable.

I didn't had much time to go on the track is 2013 but I've drove on the ice and snow and the adjustment has been quite close to perfect.

When I bought the parts needed for the ABS delete, I also bought a Bias gauge setup which I haven't setup yet.

Megan370z · 02-14-2014, 07:07 PM

Body update !!!

so Ive been quite lazy for the pass couple week.

It still needs to be glued in place (3M double side tape) and the part itself weight in at 375 grams
If I ever sell my whole single exhaust setup I will either include this one or a new one.

Tomorrow I will have the installed bumper view picture

Stay tuned !!!

Megan370z · 02-15-2014, 12:28 PM

New pictures !!

Just a reminder, this is the first version of the Overlay. Its not perfect and I already corrected the issue on the mold.

This is another cool Update of the next project that I started working on this morning... its cold outside so I had to rush a little bit once I got in the garage ! ( it was -15 C )

It wont be a square side corner like it currently is on the top side but more like something how it is on the lower curved plate.
yes, the side wing/plate whatever we call them.. an outside side wall will be included and they wont be hanging without support.
But you get the idea....

Double deck diffuser project.

carlitos_370z · 02-18-2014, 05:40 AM

want to see thet diffuser dude!!

pearlyZ · 02-18-2014, 06:36 AM

Let see it

Sent from my iPhone using Tapatalk

Megan370z · 02-18-2014, 08:52 AM

Im currently making a mold for the rear bumper skin (which is drying up as we speak). I have a long weekend coming so there will be some development

wheee! · 02-18-2014, 12:13 PM

Quote:

Originally Posted by Megan370z

Im currently making a mold for the rear bumper skin (which is drying up as we speak). I have a long weekend coming so there will be some development

Looks good!

Sent from Canadia

Megan370z · 02-18-2014, 08:17 PM

Quote:

Originally Posted by wheee!

Looks good!

how about this ?

With this picture you can actually see how aggressive the rear setup will be (should be.. hehe)
Everything in blue will be gone for the diffuser kit !

GaleForce · 02-18-2014, 11:00 PM

I hope that was some old plumbing you had laying around.

Seriously, I like your mould support idea.

02-06-2014, 08:38 PM	#2 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	I two do not have a heated garage here in ct, just a covered carport. I have a template made up for a rear diffuser but it's been snowing like crazy so I can't do anything. I did some scale tests with the one I made but my biggest issue is my damn muffler, the only way it would fit is with a 12 degree angle which is too much. I thought about getting turn downs just before the rear axle but I think it might be too loud for the local tracks. My plan is to make it out of FRP then maybe a CF version after I figure out how to make a mould. That rear end is going to be bitchen when finished. Luciano13 likes this. __________________ 2011 MB 6MT Masterbeatty journal

02-08-2014, 12:18 PM	#3 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Meg, can you be so polite to post another pic of your ABS delete with the proportioning valve? Like to get an idea of location of plumbing. __________________

02-08-2014, 01:30 PM	#4 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 246	Awesome mold Megan Megan370z likes this. __________________ http://www.the370z.com/members-370z-...lid-red-z.html

02-08-2014, 05:42 PM	#6 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Big props man. I have two track days in the next four weeks but after those I will start on this. Looks pretty simple. Did you have to experiment with the rear bias or do you have any recommendations where to set the proportioning valve? __________________

02-14-2014, 07:07 PM	#8 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	Body update !!! so Ive been quite lazy for the pass couple week. It still needs to be glued in place (3M double side tape) and the part itself weight in at 375 grams If I ever sell my whole single exhaust setup I will either include this one or a new one. Tomorrow I will have the installed bumper view picture Stay tuned !!! Mr&Mrs, ts-c63, GaleForce and 2 others like this. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me Last edited by Megan370z; 04-05-2014 at 07:45 PM.

02-15-2014, 12:28 PM	#9 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	New pictures !! Just a reminder, this is the first version of the Overlay. Its not perfect and I already corrected the issue on the mold. This is another cool Update of the next project that I started working on this morning... its cold outside so I had to rush a little bit once I got in the garage ! ( it was -15 C ) It wont be a square side corner like it currently is on the top side but more like something how it is on the lower curved plate. yes, the side wing/plate whatever we call them.. an outside side wall will be included and they wont be hanging without support. But you get the idea.... Double deck diffuser project. SPOHN and carlitos_370z like this. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me Last edited by Megan370z; 02-15-2014 at 12:31 PM.

02-18-2014, 05:40 AM	#10 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	want to see thet diffuser dude!!

02-18-2014, 06:36 AM	#11 (permalink)
pearlyZ Enthusiast Member Join Date: Sep 2013 Location: Rowlett, TX Posts: 284 Drives: 13 pearl white 370z Rep Power: 12	Let see it Sent from my iPhone using Tapatalk

02-18-2014, 08:52 AM	#12 (permalink)
Megan370z A True Z Fanatic Join Date: Oct 2009 Location: Canada Posts: 1,156 Drives: 370z Rep Power: 24	Im currently making a mold for the rear bumper skin (which is drying up as we speak). I have a long weekend coming so there will be some development wheee! likes this. __________________ Megan Journal Click Me ....................One Man Team Motorsport Click Me

02-18-2014, 11:00 PM	#15 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I hope that was some old plumbing you had laying around. Seriously, I like your mould support idea. Megan370z likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MEGAN RACING: SS Downpipes!	G&M Performance	Drivetrain/Engine	8	07-25-2011 12:50 PM
Megan Drift CBE - my 2 cents	Vince's Red-Z	Intake/Exhaust	14	02-26-2011 07:51 PM
Megan Racing Exhaust	tyler20c	Intake/Exhaust	3	01-07-2011 12:59 PM