wheee!'s Journal - RoZy

wheee! · 05-11-2012, 10:04 PM

Thanks...eternal work in progress

Got the oil cooler installed! Yay!

wheee! · 05-25-2012, 07:16 PM

SPC Camber arms went on RoZy last night. No pics of the install as I was time pressed, but it went great.
Alignment day is this Sunday with the Zedmonton Lounge at Fountain Tire. Will get some shots of it then!

The camber pattern was pretty obvious before i installed the new arms....

wheee! · 05-28-2012, 09:48 AM

Alignment day was yesterday and we got three cars thru Landon's shop. My rears are now sitting pretty at -1.2. Very happy with this setting and the 305's....

wheee! · 06-13-2012, 11:59 AM

Forgot to mention that I got the SS Clutch line retaining clip back on while I was doing the oil cooler install. It was a pain, but I feel better knowing that there will be no vibration damage to the line!

Also did the steering lock fuse delete so I don't have to worry about the Steering Lock crapping out while I am in the middle of no-where!

My next mod may very well be a full paint correction (again) and acrylic paint sealant... I am just tired of fighting swirls with just standard carnauba polish.

simota1 · 06-13-2012, 04:17 PM

nice mods bro...

which retaining clip are you talking about? and do i need one?

wheee! · 06-13-2012, 04:41 PM

Quote:

Originally Posted by simota1

nice mods bro...

which retaining clip are you talking about? and do i need one?

The one where the top of the SS line attaches to the hard line, beside the exhaust manifold outlet. It slides off to remove the old rubber line and then needs to be replaced when the new SS line goes in to prevent vibration wear. It's just a pain to get at!

simota1 · 06-14-2012, 10:13 PM

ahhh kool man i have a ss clutch line also but havent installed it yet... where can i purchase one? the retaining clip thing

wheee! · 06-14-2012, 10:46 PM

It's already on the car. It holds the stock line in place. You also get an extra one when you remove the stock line from the tranny too!

simota1 · 06-14-2012, 11:11 PM

Quote:

Originally Posted by wheee!

It's already on the car. It holds the stock line in place. You also get an extra one when you remove the stock line from the tranny too!

thanks man ill tell my mechanic not to forget to put it on....

repped!!!

wheee! · 06-16-2012, 06:27 PM

Had the wheels checked for balance today as there was a slight shimmy in the steering at about 120 kmh. Took the wheel off at the shop and found this:

Hub centric ring had snapped clean off!
Luckily, my buddy that owns the shop had a spare set of 15mm H&R spacers and I was able to get one from him to replace it. Now I'll have to see how good the warranty is from H&R!

blackcherry20 · 06-16-2012, 08:17 PM

Wow-is that dangerous to have been driving around w it that way?

simota1 · 06-17-2012, 01:41 AM

thats crazy bro!!!!

SPOHN · 06-17-2012, 08:39 AM

Wow.

wheee! · 06-17-2012, 10:29 PM

Quote:

Originally Posted by blackcherry20

Wow-is that dangerous to have been driving around w it that way?

Not really. I checked it out as soon as I felt the vibration. No problems really.

Quote:

Originally Posted by simota1

thats crazy bro!!!!

I've seen it happen before on other cars

Quote:

Originally Posted by SPOHN

Wow.

That's what I thought!

wheee! · 07-17-2012, 09:15 AM

Did a small mod this last week... swapped ONE of my hood dampeners from the V2 Kellyefields kit with ONE of the V1 kits. The lift is now perfect! Drops closed about 1 ft above closed position and raises smoothly after the 1 ft mark on its own. No bounce at the top and a smooth fitment when closed. Now mine and NuffZed's car have a mixed pairing but perfect balance of lift and drop! Very happy!

Mine at the last car show:

NuffZed's in my garage getting some installs, plus the hood lift mod.

05-11-2012, 10:04 PM	#61 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Thanks...eternal work in progress Got the oil cooler installed! Yay! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal Last edited by wheee!; 05-25-2012 at 07:20 PM.

05-25-2012, 07:16 PM	#62 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	SPC Camber arms went on RoZy last night. No pics of the install as I was time pressed, but it went great. Alignment day is this Sunday with the Zedmonton Lounge at Fountain Tire. Will get some shots of it then! The camber pattern was pretty obvious before i installed the new arms.... __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal Last edited by wheee!; 05-25-2012 at 07:21 PM.

05-28-2012, 09:48 AM	#63 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Alignment day was yesterday and we got three cars thru Landon's shop. My rears are now sitting pretty at -1.2. Very happy with this setting and the 305's.... __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-13-2012, 11:59 AM	#64 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Forgot to mention that I got the SS Clutch line retaining clip back on while I was doing the oil cooler install. It was a pain, but I feel better knowing that there will be no vibration damage to the line! Also did the steering lock fuse delete so I don't have to worry about the Steering Lock crapping out while I am in the middle of no-where! My next mod may very well be a full paint correction (again) and acrylic paint sealant... I am just tired of fighting swirls with just standard carnauba polish. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-13-2012, 04:17 PM	#65 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	nice mods bro... which retaining clip are you talking about? and do i need one? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-14-2012, 10:13 PM	#67 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	ahhh kool man i have a ss clutch line also but havent installed it yet... where can i purchase one? the retaining clip thing __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-14-2012, 10:46 PM	#68 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	It's already on the car. It holds the stock line in place. You also get an extra one when you remove the stock line from the tranny too! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-16-2012, 06:27 PM	#70 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Had the wheels checked for balance today as there was a slight shimmy in the steering at about 120 kmh. Took the wheel off at the shop and found this: Hub centric ring had snapped clean off! Luckily, my buddy that owns the shop had a spare set of 15mm H&R spacers and I was able to get one from him to replace it. Now I'll have to see how good the warranty is from H&R! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

06-16-2012, 08:17 PM	#71 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240459	Wow-is that dangerous to have been driving around w it that way? __________________ Grand Sport Corvette Arctic White

06-17-2012, 01:41 AM	#72 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	thats crazy bro!!!! __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-17-2012, 08:39 AM	#73 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Wow. __________________

07-17-2012, 09:15 AM	#75 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Did a small mod this last week... swapped ONE of my hood dampeners from the V2 Kellyefields kit with ONE of the V1 kits. The lift is now perfect! Drops closed about 1 ft above closed position and raises smoothly after the 1 ft mark on its own. No bounce at the top and a smooth fitment when closed. Now mine and NuffZed's car have a mixed pairing but perfect balance of lift and drop! Very happy! Mine at the last car show: NuffZed's in my garage getting some installs, plus the hood lift mod. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal Last edited by wheee!; 07-17-2012 at 09:17 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ClemsonWill's Journal	ClemsonWill	Member's 370Z Gallery	507	07-07-2017 10:24 AM
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
Unique_Z Journal	Unique_Z	Member's 370Z Gallery	364	09-29-2014 10:05 AM
Z1804's Journal	Z1804	Member's 370Z Gallery	164	03-21-2012 06:58 AM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM