wheee!'s Journal - RoZy

wheee! · 12-28-2013, 04:33 PM

It's from my local sponsor NYG Racing. They ordered it from Extreme Dimensions. As for cracking, I would think that it would not survive an impact but most Fiberglas wouldn't. The duraflex has a lot if give in it and is easier to mount than a straight Fiberglas kit.

wheee! · 12-29-2013, 04:54 PM

Got the old stock sport spoiler off finally. Not the easiest thing to do by far! Anyways, sat the Seibon spoiler on there to get an idea of the finished look...

Sent from Canadia

wheee! · 12-29-2013, 04:58 PM

Noticed that the bumper foam reinforcement is very tight against the bumper... and the vented areas are going to be hard to install the mesh with the foam that close. I think I will have to trim the foam back a bit (not remove it entirely) so the grills can go in.

I also plan on painting the kit the stock Black Rose colour with satin black accents throughout. All the inner 'scoop' areas will be sating black along with the traditional paint stylings of the amuse kit. I may need to paint the entire car in the process, especially if I decide to add some custom front fenders too.... The rear hatch will need to be painted where the old spoiler came off and the holes will need to be filled prior to mounting the new wing.

zefaulter · 12-29-2013, 05:56 PM

painting the whole car? Correct me if I'm wrong, this whole process could cost almost as much as going FI, right?

wheee! · 12-29-2013, 07:05 PM

It just may!! Lol

Sent from Canadia

simota1 · 12-30-2013, 05:50 AM

looking good man!!! keep it up brother

wheee! · 12-30-2013, 11:40 AM

Thanks Jon! I am really hoping the finished product will look good! I am definitely at the point of no return..! lol

djpathfinder · 12-31-2013, 01:28 AM

Quote:

Originally Posted by wheee!

I may need to paint the entire car in the process...

they can blend into adjacent panels.

djpathfinder · 12-31-2013, 01:30 AM

Quote:

Originally Posted by wheee!

Got the old stock sport spoiler off finally. Not the easiest thing to do by far! Anyways, sat the Seibon spoiler on there to get an idea of the finished look...

Sent from Canadia

Need a bigger (read: Amuse) wing.

zefaulter · 12-31-2013, 09:52 AM

Come to think of it, those wheels are gonna look tiny too

wheee! · 12-31-2013, 11:06 AM

Do you mean the 'storage' wheels? The mounted wheels and tires are my winter rims and tires. I only mount them to store the vehicle.
Normally I run the stock sport rays with Ventus v12 305's and 275's....

But yeah, I need a set of Work Varianza T1S's with bronze barrels and spokes....

Sent from Canadia

wheee! · 12-31-2013, 11:07 AM

Quote:

Originally Posted by djpathfinder

Need a bigger (read: Amuse) wing.

You just like to stir the pot!

You know I don't care for the amuse wing and it's window blocking size...!

Sent from Canadia

djpathfinder · 01-02-2014, 01:40 AM

...seat cushion.

wheee! · 01-12-2014, 03:58 PM

Don't get me wrong. I think the amuse wing suits the body kit but I hate to lose even more visibility.

Mr&Mrs · 01-13-2014, 08:23 PM

You won't lose much visibility if any. The top of the wing is just about roof height. You look right through it with no problem. If anything the Seibon wing takes away more IMO.

12-28-2013, 04:33 PM	#241 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	It's from my local sponsor NYG Racing. They ordered it from Extreme Dimensions. As for cracking, I would think that it would not survive an impact but most Fiberglas wouldn't. The duraflex has a lot if give in it and is easier to mount than a straight Fiberglas kit. zefaulter likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-29-2013, 04:54 PM	#242 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Got the old stock sport spoiler off finally. Not the easiest thing to do by far! Anyways, sat the Seibon spoiler on there to get an idea of the finished look... Sent from Canadia Mitco39 and zefaulter like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-29-2013, 04:58 PM	#243 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Noticed that the bumper foam reinforcement is very tight against the bumper... and the vented areas are going to be hard to install the mesh with the foam that close. I think I will have to trim the foam back a bit (not remove it entirely) so the grills can go in. I also plan on painting the kit the stock Black Rose colour with satin black accents throughout. All the inner 'scoop' areas will be sating black along with the traditional paint stylings of the amuse kit. I may need to paint the entire car in the process, especially if I decide to add some custom front fenders too.... The rear hatch will need to be painted where the old spoiler came off and the holes will need to be filled prior to mounting the new wing. zefaulter likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-29-2013, 07:05 PM	#245 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	It just may!! Lol Sent from Canadia __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-30-2013, 05:50 AM	#246 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	looking good man!!! keep it up brother wheee! likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

12-29-2013, 05:56 PM	#244 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	painting the whole car? Correct me if I'm wrong, this whole process could cost almost as much as going FI, right?

12-30-2013, 11:40 AM	#247 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Thanks Jon! I am really hoping the finished product will look good! I am definitely at the point of no return..! lol __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-31-2013, 09:52 AM	#250 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Come to think of it, those wheels are gonna look tiny too

12-31-2013, 11:06 AM	#251 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Do you mean the 'storage' wheels? The mounted wheels and tires are my winter rims and tires. I only mount them to store the vehicle. Normally I run the stock sport rays with Ventus v12 305's and 275's.... But yeah, I need a set of Work Varianza T1S's with bronze barrels and spokes.... Sent from Canadia zefaulter likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

01-02-2014, 01:40 AM	#253 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	...seat cushion. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

01-12-2014, 03:58 PM	#254 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	Don't get me wrong. I think the amuse wing suits the body kit but I hate to lose even more visibility. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

01-13-2014, 08:23 PM	#255 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	You won't lose much visibility if any. The top of the wing is just about roof height. You look right through it with no problem. If anything the Seibon wing takes away more IMO. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ClemsonWill's Journal	ClemsonWill	Member's 370Z Gallery	507	07-07-2017 10:24 AM
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
Unique_Z Journal	Unique_Z	Member's 370Z Gallery	364	09-29-2014 10:05 AM
Z1804's Journal	Z1804	Member's 370Z Gallery	164	03-21-2012 06:58 AM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM