Are you asking for the parts list?

I ordered a pair of turbonetics dual port internal actuators to prevent my boost drop at high RPM, back on stands she goes. I was expecting the actuators Friday but there was a delay in shipment, so I removed the GTM actuators (who the hell even makes these, china?) and re-routed my vacuum lines to the wastegates and EBC in preparation.

http://i.imgur.com/NsBam35.jpg

Also installed the Zspeed nismo undertray, awesome piece!

http://i.imgur.com/PYzJSnv.jpg

new dual port wastegates installed, these work similar to externals in that you supply a boost source to the diaphragm side to push the gate open, the opposite side you connect to your boost controller. By applying a certain amount of boost to the opposite side of the diaphragm you essentially have a stronger spring and it requires more boost to open the wastegate. This setup should let me reliably run between 10 and 20psi without suffering from boost drop off.

http://i.imgur.com/pkKgqJ1.jpg

http://i.imgur.com/RHnXbvO.jpg

http://i.imgur.com/1an5g5f.jpg