looking great man... quick question whats the brake booster for? dont we already have a stock one

thanks ! the booster just adds air to the stock system ... so increases capacity.

no air = no power assist = two feet all in and pray.

some have tested the addition of a booster with great results ... others have tested it and it doesn't do anything. not sure which crowd I am in as have not tested it yet.

Some new show shoes ... Vertini Racing Drift Gold, 19x9.0 5x114.3 and 19x10.5 5x114.3 skinned in some Michelin Pilot Super Sports, 255/35/19 and 295/30/19.

http://www.the370z.com/members/sixpa...e68054-ss1.jpg

SPL Titanium Rear Camber Arm ... Holy crap these things are huge compared to the stock ones.

http://www.the370z.com/members/sixpa...e68055-ss2.jpg

... and mounted. Think I am going to put a 10mm spacer on the rear.

http://www.the370z.com/members/sixpa...re68056-dd.jpg

... one more snow storm to live through this Monday, and then can finally get busy on installing a bunch of stuff that has been piling up in the garage over the winter :tup:

I noticed last night that I have a small "chip" broken out of the rear side front engine cover (13035+A) right on the seam where the two pieces come together. It's in a spot where it would be impossible for me to have done it by dropping a tool on it or something ... no clue how it got there, or how long it has been there. Car has been running fine, though today is only the second day I have driven it since before winter. It looks like a piece of the gasket or seal material is missing along with the tiny piece of metal that used to be a part of the rear cover.Is it anything to worry about ?

The diagram below the chip is in the backside piece ... and a photo of the chip as well.

UPDATED: Based on information from another forum member in another thread, these are actually pry holes for separating the two halves and are nothing to worry about.

http://www.the370z.com/members/sixpa...-z34-135-1.gif

... and a shot of the spot.

http://www.the370z.com/members/sixpa...8170-crack.jpg

... updated first page mod list after a year or so.

... engine bay after CJM fuel tap and gauge upgrade ... I ditched the little plate that was in the way as opposed to grinding off the tab in the way. Works like a champ !

http://www.the370z.com/members/sixpa...e78325-cjm.jpg

... installed SPL end links and a hotchkiss swaybar in the front. Upon inspecting the stock end links those things are pathetic. Mushy, mushy, mushy and they don't look very good. SPL stuff always impresses me in how stout looking they are.

http://www.the370z.com/members/sixpa...plendlinks.jpg

SPL traction arms, hotchkis rear sway on the middle hole, SPL end links in the rear ... already had the SPL Rear Camber arms so slowly adding all SPL.

http://www.the370z.com/members/sixpa...78372-spl2.jpg

... and had to add a little more color in the engine bay so got a Gates Racing Belt to replace the dull plain black thing I had in there. Have UR pulleys so had a shorter than stock belt in there, just matched it up to the appropriate Gates Racing belt. Same part numbers, just add a RB to the end and you end up with racingo version that is blue and has the white gates racing logo imprinted on the outer side.

http://www.the370z.com/members/sixpa...gates-belt.jpg

I have noticed it only takes about 4 hours for fuel pressure to drop to zero ... wondering if this is normal as other's had posted that fuel pressure would still be present when disconnecting the fuel line to install phunk's little fuel tap and gauge deal. I am guessing it is normal for the fuel pressure to become almost non-measurable within several hours.

... couple pics from FedEx back in July.

http://www.the370z.com/members/sixpa...30-photo-1.jpg


http://www.the370z.com/members/sixpa...31-photo-2.jpg

... panorama shot at FedEx in August sometime ...

http://www.the370z.com/members/sixpa...1511-image.jpg

Kognition Designs 68" GT wing before getting mounted ...

http://www.the370z.com/members/sixpa...1507-image.jpg

sweet build !!

... that's alotta holes :tup:

http://www.the370z.com/members/sixpa...1509-image.jpg

thanks !