Rusty's Nismo Journal

Rusty · 09-26-2017, 08:44 PM

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

Spartan 1771 · 09-26-2017, 09:51 PM

Quote:

Originally Posted by Rusty

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

VERY nice!

Rusty · 09-29-2017, 03:15 PM

Seen the surgeon today. No more brace!

BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace.

Now maybe, I can make some progress on the Nismo.

Hotrodz · 09-29-2017, 03:19 PM

Quote:

Originally Posted by Rusty

Seen the surgeon today. No more brace!

BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace.

Now maybe, I can make some progress on the Nismo.

Nice...don't over do it lol!

Sent from my SM-N910P using Tapatalk

Rusty · 09-29-2017, 03:22 PM

Quote:

Originally Posted by Hotrodz

Nice...don't over do it lol!

Sent from my SM-N910P using Tapatalk

That's my middle name.

Elmo370z · 09-30-2017, 02:50 AM

over do it

cv129 · 09-30-2017, 02:53 PM

Quote:

Originally Posted by Rusty

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

Got a switch for nuke missles? Lol

Rusty · 10-02-2017, 08:20 PM

Looking back through this thread. I don't have any pictures of my ATI damper installed. So here is 2.

Rusty · 10-05-2017, 10:37 PM

Figured out my wiring behind the cubby for the gauges and switches. I can't run a switch with a light in it for the YAW sensor like I wanted to.

So the wiring is done behind the gauges and switches. I'm trying to make this plug and play. If I have to remove the cubby in the future. All I have to do is unplug a couple of connectors.

1st pic is the backside of the cubby completed.
2nd pic is of the connection bar and relays for the diff pump and diff fan. This will be mounted to the dash.

djtodd · 10-06-2017, 06:26 AM

Looks great!

Do you think you'll run the pump without the fan or vice versa?

I didn't use separate switches on mine

Sent from my iPhone using Tapatalk

Hotrodz · 10-06-2017, 11:22 AM

Quote:

Originally Posted by Rusty

Figured out my wiring behind the cubby for the gauges and switches. I can't run a switch with a light in it for the YAW sensor like I wanted to.

So the wiring is done behind the gauges and switches. I'm trying to make this plug and play. If I have to remove the cubby in the future. All I have to do is unplug a couple of connectors.

1st pic is the backside of the cubby completed.
2nd pic is of the connection bar and relays for the diff pump and diff fan. This will be mounted to the dash.

Great job, nice and clean!

Sent from my SM-N910P using Tapatalk

Hotrodz · 10-06-2017, 11:24 AM

Quote:

Originally Posted by djtodd

Looks great!

Do you think you'll run the pump without the fan or vice versa?

I didn't use separate switches on mine

Sent from my iPhone using Tapatalk

Hello Mr. Todd, glad to see you are still alive and well lol! I to catch up with at zdayz 2018 my friend.

Sent from my SM-N910P using Tapatalk

Rusty · 10-06-2017, 11:33 AM

Quote:

Originally Posted by djtodd

Looks great!

Do you think you'll run the pump without the fan or vice versa?

I didn't use separate switches on mine

Sent from my iPhone using Tapatalk

I'll run the pump first. If the temps don't come down the way I would like them to. Then I'll switch the fan on. I'll know more once I'm back up and running, and have some experience with it.

Rusty · 10-08-2017, 07:31 PM

Gauges are done.

I have to trim a little in one spot on the panel. And try to figure out my YAW sensor switch. Trying to have it work with a lighted switch that has 3 plugs on the back. A ground, load, and power.

Pic's of what behind the cubby looks like now.

Rusty · 10-08-2017, 07:41 PM

Some pic's of the gauges installed, and the motor running.
The oil pressure spikes to 100 psi and stays there for awhile. Then drops down to about 40psi. Have the LED warning light set at 25 psi.

Since I have the water temp sensor in the upper rad hose. It will see temp after the thermostat is open. So I will see the Dots move first. Have the LED warning light set at 255F.

Have to label the switches yet.

Have to finish routing the wires back to the diff. Pull the diff. Install the OS Giken LSD, the SPL diff bushings, and diff cooler yet. Have the LED warning light set to 255F.

09-29-2017, 03:15 PM	#738 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Seen the surgeon today. No more brace! BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace. Now maybe, I can make some progress on the Nismo. Spartan 1771, Hotrodz, cigarclifford and 3 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-30-2017, 02:50 AM	#741 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	over do it Rusty likes this.

10-06-2017, 06:26 AM	#745 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	Looks great! Do you think you'll run the pump without the fan or vice versa? I didn't use separate switches on mine Sent from my iPhone using Tapatalk Rusty likes this. __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 04:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 10:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 04:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM