Rusty's Nismo Journal

Rusty · 04-12-2013, 11:47 AM

Quote:

Originally Posted by sig11

Weird. I haven't had to do anything to the computer to get the videos off. You could get a $10 SD card reader and avoid that.

Make sure you update the firmware on the camera! They're buggy pieces of junk without the updates. I helped a friend get his working last weekend at Mid-Ohio. Took great video once we got it upgraded!

Quote:

Originally Posted by sig11

Oh! How is that external mic? Do you still need a big dead kitten to get clean sound?

I'm working with a $10.00 computer.

It was a Christmas present from my kid. LOL My old Dell crashed, and my daughter got me this cheap HP. So, I'm going to get another 'puter shortly.

This HP is just a base model to begin with.

I got the GoPro to work great with my computer at work. BUT, I have to watch out for the IT Nazi's!

I could end up getting sh!t canned if not careful.

Rusty · 04-12-2013, 11:50 AM

Quote:

Originally Posted by sig11

Oh! How is that external mic? Do you still need a big dead kitten to get clean sound?

I put the foam sock on it before I taped it on. You can hear the exhaust, tire noise, and wind. So, yea it needs a bigger dead cat.

Rusty · 04-12-2013, 09:02 PM

Here's the link for the RAM GoPro mount. Cost me $33.21 plus shipping.

RAM Mount GoPro Roll Bar Strap Mount RAM-B-149Z-2-GOP1U

Rusty · 04-12-2013, 11:30 PM

I modded my waterproof housing for my Hero3 Black Edition. So that I could use the mic and a polarized filter. Heres the pictures and a link to the filter.

GoPro – Polar Pro Filters New! Cube Polarizer Filter-Hero3 - GoPro - Polar Pro Filters

One thing about the Hero3. You can play the video's from the camera to the tv. You got to see it on a 60" LED with surround sound.

Rusty · 04-14-2013, 05:52 AM

Test I did using the polarized filter and the mic inside the Nismo. Camera setting are 720p at 60fps. I used the WiFi to start and stop the camera.

chknhawk · 04-23-2013, 09:12 AM

sub'd

Mr&Mrs · 04-24-2013, 02:29 AM

I am so dang jealous of the roads I see people driving on this forum!!! Great video cant wait to see more!

sig11 · 04-24-2013, 09:33 AM

Quote:

Originally Posted by Mr&Mrs

I am so dang jealous of the roads I see people driving on this forum!!! Great video cant wait to see more!

Come to ZdayZ and drive some great ones.

Mr&Mrs · 04-24-2013, 10:04 AM

I was set up to come this year but just had to cancel.

Rusty · 04-25-2013, 05:37 AM

My Ram extension came in. I had to assemble it. Which is nice. Because the tube that came with it is about 17" long, so you can cut it to the length you need. I cut mine to 11" from ball to ball. This positions it about eye level and just behind you ear. I thought I had a good location for the mic. I taped it to a piece of metal I had welded together, and put it in the rear. Thought that it would cut down on the wind noise since it's inside the car, but still hear the exhaust. WRONG! I had the windows down, and that's what you hear mostly on the video. Wind noise.

Camera settings: ProTune Off, Resolution 1440p, 30fps, Spot Meter On, Polarized lense filter.

RAM Mount Plastic 12 inch Extended Arm with Double 1 inch Socket

scruffydog · 04-29-2013, 01:35 AM

love what you did man. You're always about having fun and making the best out of life. Thanks for sharing. I'm gonna pull the trigger on the Ram mount now haha.

Rusty · 04-29-2013, 02:25 AM

Quote:

Originally Posted by scruffydog

love what you did man. You're always about having fun and making the best out of life. Thanks for sharing. I'm gonna pull the trigger on the Ram mount now haha.

Thanks!

You only go around once in life, and it's short. So make the most out of it. I lost my wife to cancer 2 years ago at the age of 50. That was a leason I will not forget about the meaning of life.

dmhenderson · 05-07-2013, 11:16 AM

Just wanted to say thanks again for helping me figure out what to do with those RC ducts. My body shop actually made an account so that they would be able to see the pictures of your DIY. They said it was very well done - which is pretty high praise coming from D&V.

Should have her back tomorrow evening. Would have been today but the duct kit install was a bit more complex than they had initially assumed (wait, you mean we're not just cutting holes in your bumper?!?)

I ended up having the ducts painted to match the body. I have no carbon accents anywhere on the car and they looked goofy in grey/carbon (like the car had buck teeth).

Rusty · 05-07-2013, 09:20 PM

Quote:

Originally Posted by dmhenderson

Just wanted to say thanks again for helping me figure out what to do with those RC ducts. My body shop actually made an account so that they would be able to see the pictures of your DIY. They said it was very well done - which is pretty high praise coming from D&V.

Should have her back tomorrow evening. Would have been today but the duct kit install was a bit more complex than they had initially assumed (wait, you mean we're not just cutting holes in your bumper?!?)

I ended up having the ducts painted to match the body. I have no carbon accents anywhere on the car and they looked goofy in grey/carbon (like the car had buck teeth).

Glad that I could help.

Rusty · 05-08-2013, 05:14 AM

Quote:

Originally Posted by Rusty

I modded my waterproof housing for my Hero3 Black Edition. So that I could use the mic and a polarized filter. Heres the pictures and a link to the filter.

GoPro – Polar Pro Filters New! Cube Polarizer Filter-Hero3 - GoPro - Polar Pro Filters

One thing about the Hero3. You can play the video's from the camera to the tv. You got to see it on a 60" LED with surround sound.

I did all of this work. Now you can buy it from GoPro. With the holes already cut out.

HERO3 Skeleton Housing

04-12-2013, 09:02 PM	#228 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Here's the link for the RAM GoPro mount. Cost me $33.21 plus shipping. RAM Mount GoPro Roll Bar Strap Mount RAM-B-149Z-2-GOP1U __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-23-2013, 09:12 AM	#231 (permalink)
chknhawk Track Member Join Date: May 2012 Location: Kentucky Posts: 541 Drives: Like a batouttahell! Rep Power: 14	sub'd Rusty likes this. __________________ \| AEM \| INVIDIA \| GREDDY \| STANCE \| NISMO \| SETRAB \| STOPTECH \| HAWK \| TOYO \| HANKOOK \| BRIDE (wishlist) \|

04-24-2013, 02:29 AM	#232 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	I am so dang jealous of the roads I see people driving on this forum!!! Great video cant wait to see more! Rusty likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

04-24-2013, 10:04 AM	#234 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	I was set up to come this year but just had to cancel. Rusty likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

04-29-2013, 01:35 AM	#236 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 717	love what you did man. You're always about having fun and making the best out of life. Thanks for sharing. I'm gonna pull the trigger on the Ram mount now haha. Rusty and SeeThruHead like this. __________________ Magnetic Black 2010 370z Scruffydog's Journal

05-07-2013, 11:16 AM	#238 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Just wanted to say thanks again for helping me figure out what to do with those RC ducts. My body shop actually made an account so that they would be able to see the pictures of your DIY. They said it was very well done - which is pretty high praise coming from D&V. Should have her back tomorrow evening. Would have been today but the duct kit install was a bit more complex than they had initially assumed (wait, you mean we're not just cutting holes in your bumper?!?) I ended up having the ducts painted to match the body. I have no carbon accents anywhere on the car and they looked goofy in grey/carbon (like the car had buck teeth). Rusty likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 04:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 10:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 04:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM