Rusty's Nismo Journal

FPenvy

Rusty will I finally get to see your Z in person this season? Lol I posted the new schedule for the flashlight drags in the pa thread a week or so ago.

Also I'm bout to install my oil cooler this week/weekend

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Rusty

It depends on my work schedule. LOL

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FPenvy

as usual lol

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Rusty

Thanks!
My driving skills are not up to the level the Z is at. So as my skills improve, and I run into things. That's when I make improvement to the Z or I feel the need to make changes before I run into problems.

I did the oil cooler first as anybody else has run into that problem. So the oil temp has never been a problem.

Skills increased. So next problem was fuel starvation. Fixed that with "phunks" kit.

I'm working on the brakes now. Ducts, 2 piece rotors, stainless lines, and pads.

The install for the LTH's. There is a sensor on the rack and pinion that had to be reset by the dealer. The hardest part of the install is getting the heat shield out of the driving side. PITA! That's what takes so long. The install is pretty straight forward if you know your way around a car somewhat. If you are doing the LTH's. Drop the stock manifold and cats together as one piece. this way you don't have to fool with the demon bolts.

For a tuner in Fla. Can't answer that. As for the tune itself, it brought the mods together. It feels more refined.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Rusty

What can I say. I got over a 125 hours overtime last month alone. I was the only healthy one standing, as the flu bug hit everybody else.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FPenvy

now i see where the extra $2k for those rotors came from

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Rusty

It's also paying for my cruise next month to the Caribbean.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FPenvy

very nice

i do got 3 quick mod questions for you though.

1. i got my 34 row oil cooler in last week and my oil change kit in as well. i was wondering 1. is that AAM spacer needed even with the extra quart that the cooler holds alone?

2. what filter did you go with? i know some people say they got with the longer filter with the oil cooler kit.

3. does yours over-cool at all? a lot of people tell me they make block off plates for theirs.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

sig11

Definitely will need that if your're street driving.

FPenvy

thats what ive heard so far. figured i'd ask Rusty since we live in the same area and conditions weather wise.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Rusty

1. The spacer is not needed. I put one on as I like to do road courses. For me, it's extra protection going through the turns.

2. I'm using the standard Pure One filter. When talking about filters, it's like talking about which oil is best. I'm using the standard length filter because of the cooler plate adapter. Space is tight down there. If you think you want to use the long one, go ahead.

3. As for overcooling. I have been know to put some duct tape over a couple of rows now and then.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FPenvy

thanks for the info. a couple people ive talked to use the slightly longer filter but not sure why lol

i like the duct tape idea rather than cutting out a aluminum cover plate. it would be nicer but probably harder to get on and off unless i lay under there and devise some quick release set-up.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Rusty

The duct tape trick I picked up from roadracing motorcycles.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FPenvy

good tip to know lol

i just stocked up on blue 3m painters tape for my front end. gotta keep it protected on the long drive to zdayz.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Gawl128

If I can chime in on the Oil Cooler discussion. As far as "over-cooling" is concerned - Z1 Motorsports in there Oil Cooler kit warn against it and highly recommend something called a "Thermostatic Sandwich Plate".

I'm guessing this only lets oil go to the cooler once a certain temp is achieved.... Not sure.

If that is true - that would eliminate the need to "duck tape"?

Trying to figure this out for myself too.


Here is a link to the Z1 Cooler: http://www.z1motorsports.com/g37_370...oducts_id=4135
- At the bottom of there description they talk about the thermostatic plate.