Rusty's Nismo Journal

Hotrodz · 08-08-2018, 09:17 PM

Just tell folks is all about cooling and those holes a strategically placed to provide air directly to the oil cooler.

Rusty · 08-08-2018, 09:43 PM

Quote:

Originally Posted by Hotrodz

Just tell folks is all about cooling and those holes a strategically placed to provide air directly to the oil cooler.

They're cooling holes for my windshield washer bottle.

redondoaveb · 08-08-2018, 10:20 PM

Quote:

Originally Posted by Rusty

They're cooling holes for my windshield washer bottle.

Look at the bright side, at least you didn't drill into that.

Rusty · 08-08-2018, 10:39 PM

Quote:

Originally Posted by redondoaveb

Look at the bright side, at least you didn't drill into that.

Didn't about it until I went to put the nuts on the bolts.

Spooler · 08-08-2018, 10:47 PM

Ugg, Did you just do it on one side or both? Do you have them on correctly now?

Rusty · 08-08-2018, 11:12 PM

Quote:

Originally Posted by Spooler

Ugg, Did you just do it on one side or both? Do you have them on correctly now?

Just screwed u the right side. Everything is good now.

onzedge · 08-09-2018, 09:12 AM

Quote:

Originally Posted by Rusty

Just screwed u the right side. Everything is good now.

Elmo370z · 08-09-2018, 07:29 PM

Thanks Russ

onzedge · 08-09-2018, 07:59 PM

Quote:

Originally Posted by Elmo370z

Thanks Russ

Rusty · 08-09-2018, 09:46 PM

Quote:

Originally Posted by Elmo370z

Thanks Russ

How do you like them?

Elmo370z · 08-09-2018, 10:47 PM

They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it.

Rusty · 08-09-2018, 10:59 PM

Quote:

Originally Posted by Elmo370z

They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it.

When you install the hood vents. The cross bar under the hood. Everyone cuts that a little different. Once you have the vents installed. Put the shield up against the bottom on the vent. Start from the back to get iy seated. Look at the front of the shield. You will see where it's hitting the cross bar. This is where you have to trim the sides of the shield back with tin snips to get the front to seat. Places marked in yellow. Then put your zip-ties up from the bottom and loop around the center bar of the vent and put it back down through the other hole. I can install all 4 of mine in about 10 minutes. The shield are designed so that the water runs towards the front of the engine. In the empty space. They will also let air flow through them too. But not as much.

onzedge · 08-24-2018, 06:43 AM

Quote:

Originally Posted by Rusty

When you install the hood vents. The cross bar under the hood. Everyone cuts that a little different. Once you have the vents installed. Put the shield up against the bottom on the vent. Start from the back to get iy seated. Look at the front of the shield. You will see where it's hitting the cross bar. This is where you have to trim the sides of the shield back with tin snips to get the front to seat. Places marked in yellow. Then put your zip-ties up from the bottom and loop around the center bar of the vent and put it back down through the other hole. I can install all 4 of mine in about 10 minutes. The shield are designed so that the water runs towards the front of the engine. In the empty space. They will also let air flow through them too. But not as much.

Rusty · 11-09-2018, 05:01 AM

100,000 views on this thread.

Never thought I would ever see that many. Guess I must be doing something right. Hopefully it's helping someone out.

Spooler · 11-09-2018, 01:29 PM

This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status.

08-08-2018, 09:17 PM	#871 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Just tell folks is all about cooling and those holes a strategically placed to provide air directly to the oil cooler. Rusty likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-08-2018, 10:47 PM	#875 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,791 Drives: 2013 Nismo 370z Rep Power: 2684392	Ugg, Did you just do it on one side or both? Do you have them on correctly now? Rusty likes this.

08-09-2018, 10:47 PM	#881 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it. Rusty likes this.

11-09-2018, 05:01 AM	#884 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,171 Drives: 2011 Nismo GM 6M Rep Power: 2684437	100,000 views on this thread. Never thought I would ever see that many. Guess I must be doing something right. Hopefully it's helping someone out. Spartan 1771, Hotrodz, Spooler and 3 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-09-2018, 01:29 PM	#885 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,791 Drives: 2013 Nismo 370z Rep Power: 2684392	This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status. Rusty, Hotrodz and sx moneypit like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 04:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 04:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 10:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 04:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM