Thank you! :tiphat:

Can't wait to see your's done. :tup:

I would send pictures of mine but you don't have a rollbar lol!:eek:

Had a giant 6' 6" Elf in a red union suit drop off a early Christmas present last night.:eek: Gave me some stickies. :driving:

:eek::eek::eek: is right. Damn that's a lot of rubber. I bet they could even handle boost :stirthepot:

The same size as I have on the rear now. But with more grip. :driving:

Oh, I know. :driving:

My oil catch cans came today. Got them from Amazon. Have to get some braided hose now.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Love the color!

Sent from my SM-G965U using Tapatalk

Those are the exact cans I have. I added a small rubber o-ring around the dipstick and the top bolt (which you'll use if you don't use the breathers). The ring helped to seal those areas properly. I also put a small amount of steel wool inside of the small baffle.

Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans

:tiphat: :tup:

Motion Raceworks catch can is really nice for the price. Check that out!

At 300ml each they are too small for motorsport use - I am required to have a 2-litre catch can.

Radium makes them if you don't already have them.

I love what they put in the description :rofl2:

Are you running M1 fuel?

Trackday car. No rules to follow. If I was running in a series. Yea, it would be different.

I seen that when I bought them. And they are right. At least they are honest. :rofl2:

What size AN fittings and hose did you use?

You bought them just for the free gift, admit it. :rofl2:

My SOHO kit use's 8's and 10's if that helps any.

The fitting angles can be tricky, I went through half a dozen iterations before I was satisfied.

Sent from my SM-G955U using Tapatalk

Here are the hoses I used:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Rusty is only interested in man-hose.

Sent from my SM-G955U using Tapatalk

Finished my oil catch cans today. I used left over stainless -8AN hose I had from my diff cooler project. If anyone wanted to use the same Espeeder catch cans with brained -8AN hose. The fitting that screws into the can is a 16mmx 1.5 thread. I got mine from Jegs.

https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1

1st pic. Hose and fittings. The only thing I had to buy was the fittings that screws into the cans. Had the other fittings and hose from before.

2nd pic. Overall pic of everything connected.

3rd pic. full view of the right side.

4th & 5th pic's. Showing the valve cover location.

1st pic. Showing overall view of the left side.

2nd pic. Showing the valve cover location.

3rd pic. Where I had to trim the front of the intake cover.

link doesn't seem to work :twocents:

I don't know what's up with the link. Well, here's the Part Number: 361-AT9919EFJERL

Had to change the back-up light switch. It went back. Noticed it when the back-up camera didn't come on all the time. sometimes it would work, others it wouldn't. When it just quit all together at Madwi's place. The switch is a PITA to get to. You have to drop the tranny cross member. Replace a bracket that has 3 bolts in it. One which is hidden. Undo the wiring harness clips. Then use a 22mm deepwell socket on the switch.

1st pic. Cross member removed and jack holding the tranny up.

2nd pic. Wrench on the hidden bolt.

3rd pic. Pointing to the hidden bolt hole.

4th pic. The switch in the tranny.

5th pic. The hole where the switch goes.

6th pic. The new and old switches.

Time for some new MEATS on the rear. Mich Cup tires in 345/30-19. :tup:

How much luggage can you stuff in the rear of a Z. This is from our trip to Madwi's place. I have 1 duffer bag, and small back pack. Mia has 2 bags. The rest is the wifey's. :icon14:

2 recent pic's of the Nismo at Madwi's place. :tup:

Rusty, I really enjoyed talking to you in person and seeing your Z. I wasn't sold on my Finite Element fender vents until I seen your car in person. 100% happy I have them now.

Remember to cut holes in the fender liners, and use window screen to cover the holes.

It's so nice to put a face on a name.

I checked my catch cans today. I found very little oil in them. So I was wondering if I was pulling a vacuum through them. So I pulled out the dip sticks and put a vacuum gauge in the holes. Hot idle, I was pulling 10 inches of vacuum in each can. Wonder what everyone is getting? At least I know that they are working.

I have been checking mine also with the new build. I get nothing also so far. The Radium Catch Cans have dipsticks you can check to see if you need to drain them.

Although mine don't have a lot of blow by built up, they are catching it. Are you using any sort of filter media? I put small balls of steel wool in the baffles. That helps to collect it as it enters the can.

Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans - Picture

I have stainless steel wool in the cans.

How many miles have you put on the car since you installed the cans?

Sent from my SM-G960U using Tapatalk

There's over 6,000 miles since I installed them. Took a trip to Madwi's place for the 4th of July. From there, to Denver, to Bloomfield MN, to Keys Ok, then to home. At times, I was running over 100 mph on the interstates. :driving: