More Sidewayz!

O&G · 03-02-2012, 03:38 PM

I'll be @ that Drift Event!

VDC_OFF · 03-02-2012, 03:59 PM

Quote:

Originally Posted by speedfreek

I'm digging it!! I foresee this car making a huge dent in my savings as well as mods will surely come.

This car will do that, especially if you go JDM!

Quote:

Originally Posted by EventHorizoN

I'm stoked to see someone out there rockin` the Advan RS-D's... I ordered mine last year in April.. They had some issue with logistics, and it ended up taking way to long.. (Settled for some Volk Racing G2Type2 Matte Black) Instead. Love the build, and your attention to detail, can't wait to see more. Are you planning on taking the car to the track at all?

I would definitely love to as I havent yet. One track event is Red Meat and Race but they have those on Thursday so I would have to take the day off in order to do that. Maybe in the future. If I do I will use the RS-Ds for sure with the BF Goodrich tires, very sticky.

Quote:

Originally Posted by corbin09

I have been building my Z for drift too. You wont see them very often.. they are still a little pricey on the parts side. Good luck and have fun. I will probably run into you at mineral wells if you make the trek.

Sweet! Yeah hopefully I can make those more often, its been years since my last one. My KA 240SX couldnt handle the 90mph entry, kept losing power mid drift so Im curious to how this car will do. Just cost so much to get out there, towing for 5 hrs each way then hotel and tires.

Quote:

Originally Posted by O&G

I'll be @ that Drift Event!

Sweet, see you out there. Dont laugh, Im a bit rusty haha

haitech · 03-03-2012, 03:02 AM

Make to get some vids since it's not often you see a 370 drift

VDC_OFF · 03-20-2012, 01:31 AM

I have developed a love/hate relationship with drifting. The love comes from the feeling it gives me and the addiction I have towards it. But the hate comes from the damage it does. My last drift car ended with me sliding it into a pole.

This one I was going to be more careful since this is a much more expensive car, so I planned on entering "safe" events where there are no poles. Well at least not many of them. Problem was this event happened to fall on the same weekend as TX2K12. I wanted to show my car the way it was that Friday night and then get it ready for drifting saturday morning. This last minute preparation was a bad mistake. Dont get me wrong. The meet at Frankensteins was of epic proportions! So many cars, girls, people getting arrested for burnouts, crowds booing at cops and almost starting a riot, street races and green beer! It just sucked coming home at 12am and starting to swap wheels and remove my Top Secret cf parts. Didnt go to bed until 3am and I had to be there at 8am when it was 30 min away. So here is what when wrong. When I bought my car, I bought it with Advan RS-D's already installed with Project Kics titanium lugs. Little did I know the convertible rims I bought as drift spares required the stock lugs which were mag lugs and putting them on in the middle of the night did not allow me to see the difference. Well the wheels went on and I tightened them with the tuner lugs. Showed up the next morning at 8 on the dot. Few cars were there :/ Got up early for nothing! They were still setting up the course. In the drivers meeting Aaron of Fabricated Motorsports said they had over 50 drivers sign up so they are setting up a smaller course for the noobs on the side. Yay for me, since I want to get a feel for this car first. Hours later at 10:30 the courses are finally ready and we were off.

The small course was setup with an "S" turn near the beginning followed by a long left had sweeper that went around a pole and finished. At first I couldnt get the car to drift very well. Lots of spin outs and I couldnt figure out what method I should use on each turn. Didnt know if I should clutch kick or ebrake the first turn and then then the second? Very confusing. It seemed when I tried to do the beginning I would spin out at the end and when I focused on the long part I would have to ignore the beginning. After the 6th or so run I ignored the beginning and went for the long turn. I clutch kicked once to get the rear out and threw the steering wheel immediately to the right, the car was drifting. Then I just started to feather the throttle, feeling if I needed more speed or to slow down. It was awesome!

I wanted to go back and try it again. It was such a difference from the 240SX I used to have. It seemed to love the high speed drifts better then the small turns.

It was amazing how much control it had, its like this car was built for this. Even getting near the pole at the end didnt scare me. I just had to adjust my position with the throttle!

So then I just kept practicing my new found technique, after a while it just came second nature. No more thinking was involved!

Here is a pic of the "S" turn in the beginning. Tried to work on this one after I got comfortable with the big turn.

Here are a couple of me and my daughter... see how much fun it is!

Video you want? I didnt have a go pro or any video cameras mounted but my brother was able to take a video with his cell phone of a couple of my runs. HTML code is off so here is the link.

So all this fun, what happened? Well after a couple hours of that, something sounded funny. I was hearing something clicking when I finished one run. I drove it around slowly to try and figure it out. Busted shock? Broken arm? Flat tire? Couldnt figure it out. Then I started thinking maybe I didnt tie my lugs tight enough. Pulled over and sure enough, they were loose to the touch on one of the fronts. Thats when my friend and I noticed that these lugs dont fit on these wheels. I then had to make a run to an auto parts store to find mag lugs and all the stores were spread out since this place was located in a little town outside of Houston. Everyone had packs of mag lugs but in M12 1.5 size for Toyotas. I drove to 6 different places, wasting hours of driving time. I was very frustrated and unsuccessful. I had to buy different lugs for some volks I had as more spares so I at least got those. Back at the event, I didn't want to drive on the convertible wheels anymore, so I was going to throw on the Volks when I noticed the new lugs fit the convertible wheels! YAY! Swapped all the lugs out and got back in line 3.5 hours later after leaving. First run, I initiated the drift and BAM! What the ****!!! Pulled over to see my rim was at a 45 degree angle and my rotor was touching the ground. ARRRGGGGG!!!!!! The lugs were still on the rotor as they broke all the way through the rim. My fender was bent up. I wanted to cry. Just so anxious to get back out there and this crap happens, I guess its all my fault for not being safe and calling it quits when I didnt have the right lugs. Was able to put my RS-D back on the front and limp home. Car drove fine, just making noises from the rotor being scratched. Now I have to buy a new fender and rotor. Makes me want to quit the sport, even though I know I will just come back to it again.

Vbp6US · 03-20-2012, 03:13 AM

That was awesome VDC! Great pics and video.

nmjaxx9 · 03-20-2012, 11:21 AM

great pics!

iceman21_23 · 03-20-2012, 12:24 PM

should have told me vdc i have a whole set, of lug nuts i would have let you borrow for the event. and i only live 15 minz away

VDC_OFF · 03-20-2012, 12:56 PM

Thanks guys, the problem was I didnt know stock wheels needed those lugs because when I bought my car it came with Project Kics. Live and learn I guess, but thanks for the offering. Im going to get some at Baker, I might be able to still use the wheels with the correct lugs, ill have to check the damage and make sure.

O&G · 03-20-2012, 08:52 PM

good sh*t VDC!

Zeuz · 03-23-2012, 02:39 PM

Nice write up !!!

Apoc370z · 03-23-2012, 03:16 PM

What side skirts are those if you dont mind me asking

VDC_OFF · 03-23-2012, 03:41 PM

Thanks O&G and Zeuz!

@Apoc370z, they are Top Secret Side Skirts. Not too many of them out there, very rare.

Apoc370z · 03-23-2012, 03:50 PM

Quote:

Originally Posted by VDC_OFF

Thanks O&G and Zeuz!

@Apoc370z, they are Top Secret Side Skirts. Not too many of them out there, very rare.

Very interesting looking, no wonder i have never seen them before. Appreciate the info

VDC_OFF · 03-23-2012, 04:00 PM

Quote:

Originally Posted by Apoc370z

Very interesting looking, no wonder i have never seen them before. Appreciate the info

They are actually very identical to the Amuse sideskirts, only difference is they are in Carbon Fiber and they have this little air scoop instead of going strait up.

VDC_OFF · 04-06-2012, 11:59 AM

So been working on my car, here are some photos of the damage from the wheel falling off.

Have to get these repainted now.

Time to repair!

Taking off the bumper I saw that the little plate on the bottom corner that holds on the fender lining popped off. Have to rivet that back on.

Take off this stupid thing, too hot in Houston!

Fender is off and also removed the headlights, might customize these while they are out.

Now time to wait on my new fenders to come in the mail

03-02-2012, 03:38 PM	#16 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	I'll be @ that Drift Event! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-20-2012, 01:31 AM	#19 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	I have developed a love/hate relationship with drifting. The love comes from the feeling it gives me and the addiction I have towards it. But the hate comes from the damage it does. My last drift car ended with me sliding it into a pole. This one I was going to be more careful since this is a much more expensive car, so I planned on entering "safe" events where there are no poles. Well at least not many of them. Problem was this event happened to fall on the same weekend as TX2K12. I wanted to show my car the way it was that Friday night and then get it ready for drifting saturday morning. This last minute preparation was a bad mistake. Dont get me wrong. The meet at Frankensteins was of epic proportions! So many cars, girls, people getting arrested for burnouts, crowds booing at cops and almost starting a riot, street races and green beer! It just sucked coming home at 12am and starting to swap wheels and remove my Top Secret cf parts. Didnt go to bed until 3am and I had to be there at 8am when it was 30 min away. So here is what when wrong. When I bought my car, I bought it with Advan RS-D's already installed with Project Kics titanium lugs. Little did I know the convertible rims I bought as drift spares required the stock lugs which were mag lugs and putting them on in the middle of the night did not allow me to see the difference. Well the wheels went on and I tightened them with the tuner lugs. Showed up the next morning at 8 on the dot. Few cars were there :/ Got up early for nothing! They were still setting up the course. In the drivers meeting Aaron of Fabricated Motorsports said they had over 50 drivers sign up so they are setting up a smaller course for the noobs on the side. Yay for me, since I want to get a feel for this car first. Hours later at 10:30 the courses are finally ready and we were off. The small course was setup with an "S" turn near the beginning followed by a long left had sweeper that went around a pole and finished. At first I couldnt get the car to drift very well. Lots of spin outs and I couldnt figure out what method I should use on each turn. Didnt know if I should clutch kick or ebrake the first turn and then then the second? Very confusing. It seemed when I tried to do the beginning I would spin out at the end and when I focused on the long part I would have to ignore the beginning. After the 6th or so run I ignored the beginning and went for the long turn. I clutch kicked once to get the rear out and threw the steering wheel immediately to the right, the car was drifting. Then I just started to feather the throttle, feeling if I needed more speed or to slow down. It was awesome! I wanted to go back and try it again. It was such a difference from the 240SX I used to have. It seemed to love the high speed drifts better then the small turns. It was amazing how much control it had, its like this car was built for this. Even getting near the pole at the end didnt scare me. I just had to adjust my position with the throttle! So then I just kept practicing my new found technique, after a while it just came second nature. No more thinking was involved! Here is a pic of the "S" turn in the beginning. Tried to work on this one after I got comfortable with the big turn. Here are a couple of me and my daughter... see how much fun it is! Video you want? I didnt have a go pro or any video cameras mounted but my brother was able to take a video with his cell phone of a couple of my runs. HTML code is off so here is the link. So all this fun, what happened? Well after a couple hours of that, something sounded funny. I was hearing something clicking when I finished one run. I drove it around slowly to try and figure it out. Busted shock? Broken arm? Flat tire? Couldnt figure it out. Then I started thinking maybe I didnt tie my lugs tight enough. Pulled over and sure enough, they were loose to the touch on one of the fronts. Thats when my friend and I noticed that these lugs dont fit on these wheels. I then had to make a run to an auto parts store to find mag lugs and all the stores were spread out since this place was located in a little town outside of Houston. Everyone had packs of mag lugs but in M12 1.5 size for Toyotas. I drove to 6 different places, wasting hours of driving time. I was very frustrated and unsuccessful. I had to buy different lugs for some volks I had as more spares so I at least got those. Back at the event, I didn't want to drive on the convertible wheels anymore, so I was going to throw on the Volks when I noticed the new lugs fit the convertible wheels! YAY! Swapped all the lugs out and got back in line 3.5 hours later after leaving. First run, I initiated the drift and BAM! What the ***!!! Pulled over to see my rim was at a 45 degree angle and my rotor was touching the ground. ARRRGGGGG!!!!!! The lugs were still on the rotor as they broke all the way through the rim. My fender was bent up. I wanted to cry. Just so anxious to get back out there and this crap happens, I guess its all my fault for not being safe and calling it quits when I didnt have the right lugs. Was able to put my RS-D back on the front and limp home. Car drove fine, just making noises from the rotor being scratched. Now I have to buy a new fender and rotor. Makes me want to quit the sport, even though I know I will just come back to it again. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos Last edited by VDC_OFF; 07-19-2012 at 12:48 PM.*

03-20-2012, 12:24 PM	#22 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	should have told me vdc i have a whole set, of lug nuts i would have let you borrow for the event. and i only live 15 minz away __________________ Zele front bumper cf front lip, Seibon TS Hood, Work GS2, Ings+1 side skirts Takeda CAI Litespeed Exhaust

03-20-2012, 12:56 PM	#23 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	Thanks guys, the problem was I didnt know stock wheels needed those lugs because when I bought my car it came with Project Kics. Live and learn I guess, but thanks for the offering. Im going to get some at Baker, I might be able to still use the wheels with the correct lugs, ill have to check the damage and make sure. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos Last edited by VDC_OFF; 04-17-2012 at 04:44 PM. Reason: mistaken on lugs my car had

03-20-2012, 08:52 PM	#24 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	good sh*t VDC! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-03-2012, 03:02 AM	#18 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 15	Make to get some vids since it's not often you see a 370 drift

03-20-2012, 03:13 AM	#20 (permalink)
Vbp6US Enthusiast Member Join Date: Nov 2011 Location: SoCal Posts: 442 Drives: 2009 370z MB 6MT Rep Power: 14	That was awesome VDC! Great pics and video.

03-20-2012, 11:21 AM	#21 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 26	great pics!

03-23-2012, 02:39 PM	#25 (permalink)
Zeuz Enthusiast Member Join Date: Oct 2011 Location: Houston Texas Posts: 290 Drives: 2011 370z Rep Power: 14	Nice write up !!!

03-23-2012, 03:16 PM	#26 (permalink)
Apoc370z A True Z Fanatic Join Date: May 2011 Location: Orange County, CA Posts: 999 Drives: 2011 GM z34 Rep Power: 15	What side skirts are those if you dont mind me asking

03-23-2012, 03:41 PM	#27 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	Thanks O&G and Zeuz! @Apoc370z, they are Top Secret Side Skirts. Not too many of them out there, very rare. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

04-06-2012, 11:59 AM	#30 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	So been working on my car, here are some photos of the damage from the wheel falling off. Have to get these repainted now. Time to repair! Taking off the bumper I saw that the little plate on the bottom corner that holds on the fender lining popped off. Have to rivet that back on. Take off this stupid thing, too hot in Houston! Fender is off and also removed the headlights, might customize these while they are out. Now time to wait on my new fenders to come in the mail __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos Last edited by VDC_OFF; 04-06-2012 at 12:01 PM.