theDreamer's Z

theDreamer · 02-21-2010, 10:05 AM

Quote:

Originally Posted by SmoothZ

I bet those CF parts add about 30 more whp. Maybe even 50...

looks good, though. I like my Titek CF radiator cover, too.

Pfht, more like 25 each for the back two and 50 for the radiator cover.

JB-370z · 02-21-2010, 10:59 AM

Once you have a little bit of go why not add a little bit of show

theDreamer · 02-21-2010, 11:01 AM

Quote:

Originally Posted by JB-370z

Once you have a little bit of go why not add a little bit of show

Yeah, my go just needs to just show up, getting tired of waiting.

theDreamer · 02-28-2010, 01:30 PM

SRP Racing Pedals - Grid:
~It has been about a week since I installed my new pedals, and thank you Modshack for the DIY and being the first, but I really love these pedals. At first I was not overly impressed with them, but I changed how my feet sit on the pedals and wow it changed everything. I still have enough wiggle room to adjust my feet if they do not feel right, but when my foot goes down on a pedal it stays on the pedal. I got to test this morning a short drive without shoes on and my feet were fine after getting out.

Overall I am really impressed, the only pedal I have not installed is the dead pedal since it was late the night we installed them and did not have much light. Not the best pictures, but my POS camera could not find anything to focus on.

A new addition to the car this weekend, worth 100whp, is my ricer stickers.

JB-370z · 02-28-2010, 01:48 PM

Quote:

Originally Posted by theDreamer

Yeah, my go just needs to just show up, getting tired of waiting.

You must be waiting for the supercharger from stillen or gtm? I have decided to go turbo and get what I really want. I am getting everything in place before I order my tt kit. At the moment I am waiting on my Alliance BBK to come in; also my SSR SP3's. As soon as I get these bad boys on the car I will order the HKS hipermax lll's with a full camber kit and sway's. After that comes new clutch and fly wheel then put in a order for the tt kit, might do some lower compression pistons as well.

You car is comming along might well sir

theDreamer · 02-28-2010, 01:56 PM

Nope, I am still waiting on my exhaust and long tube headers, though the LTH have yet to be delayed and Tony has stated he is still on schedule. It is the exhaust I should have had almost six months ago, but delay after delay has set it back.
For me forced induction will come after the 3 year warranty is up, even though it does not matter since I have almost done enough to void any warranty I have, but I would just like to wait and see the kits hit the market, reviewed, etc. In the meantime I will be adding supporting mods, oil cooler, clutch/flywheel, etc.

Togo · 02-28-2010, 01:56 PM

Quote:

Originally Posted by JB-370z

You must be waiting for the supercharger from stillen or gtm? I have decided to go turbo and get what I really want. I am getting everything in place before I order my tt kit. At the moment I am waiting on my Alliance BBK to come in; also my SSR SP3's. As soon as I get these bad boys on the car I will order the HKS hipermax lll's with a full camber kit and sway's. After that comes new clutch and fly wheel then put in a order for the tt kit, might do some lower compression pistons as well.

You car is comming along might well sir

I'm dying to see the SP3's mounted JB so please post up lots of pictures. Also, why did you chose the HKS adjustable coilovers over the ever so popular KW V3? (Just curious, not criticizing)

Togo · 02-28-2010, 01:58 PM

Dreamer, where did you order the pedals from? How did you have to change your foot position to get the better feel. As in where was your foot before vs now?

Over all they look very nice. The car is coming along really nicely. I can't wait to hear the combo of FI LTH and Berk exhaust. I think that will make for an excellent combo!

theDreamer · 02-28-2010, 02:05 PM

Quote:

Originally Posted by Togo

Dreamer, where did you order the pedals from? How did you have to change your foot position to get the better feel. As in where was your foot before vs now?

Over all they look very nice. The car is coming along really nicely. I can't wait to hear the combo of FI LTH and Berk exhaust. I think that will make for an excellent combo!

Pedals are from SRP Racing (SRP Racing - Custom Aluminum Racing Pedals). My right foot when going to the brake just never felt right, not getting all the grip and slide every so often. So I just went over a bit more with it to the left and was able to start grabbing the pedal more and my foot locked in with the pedal. I think in the end it was just me being lazy, with the stock pedals I would easily just move my foot and half grab the brake pedal and be fine, but with these you need to get your foot on the pedal properly (ie not be lazy).

Togo · 02-28-2010, 02:20 PM

Quote:

Originally Posted by theDreamer

Pedals are from SRP Racing (SRP Racing - Custom Aluminum Racing Pedals). My right foot when going to the brake just never felt right, not getting all the grip and slide every so often. So I just went over a bit more with it to the left and was able to start grabbing the pedal more and my foot locked in with the pedal. I think in the end it was just me being lazy, with the stock pedals I would easily just move my foot and half grab the brake pedal and be fine, but with these you need to get your foot on the pedal properly (ie not be lazy).

Thanks for that explanation about the pedals. They look really good and it seems like they would offer a lot of grip to keep feet from moving on the pedal.

I thought maybe you got those SRP Racing pedals from a vendor, I saw that you got them from them the first time. I wonder how come we don't see more vendors offering pedals etc.

theDreamer · 02-28-2010, 02:22 PM

Quote:

Originally Posted by Togo

Thanks for that explanation about the pedals. They look really good and it seems like they would offer a lot of grip to keep feet from moving on the pedal.

I thought maybe you got those SRP Racing pedals from a vendor, I saw that you got them from them the first time. I wonder how come we don't see more vendors offering pedals etc.

Same reason vendors are not jumping on hood struts, no clue.

I think it is one of those simple things that just gets by, it is Modshack who is to thank because he went to SRP to have them measure, cut, test the pedals.

Togo · 02-28-2010, 02:24 PM

Quote:

Originally Posted by theDreamer

Same reason vendors are not jumping on hood struts, no clue.

I think it is one of those simple things that just gets by, it is Modshack who is to thank because he went to SRP to have them measure, cut, test the pedals.

Oh ok, nice! Yeah I keep seeing threads about people wanting hood struts. Aren't them some out for the Gs? could they be modded to fit the Z?

theDreamer · 03-09-2010, 09:47 AM

Well it finally arrived, and installed. Berk exhaust is on the car and sounding great.

Install:
~The install was extremely straight forward, no instruction provided, but you do not need any. Basically get the rear of the car high enough and unbolt old and bolt the new one on. Overall it took us just under two hours but that also included waiting for a jack as the one we had did not go high enough.

Thoughts:
~The exhaust sounds great, I am really bad at describing it but I will say I like it and that is all that matters.

The look of the pieces are great, installed it looks exactly like stock which may be a good or bad thing.

Negatives
~I did find a very very small amount of drone in 6th gear at 55mph but anything above or below that I do not hear it, and with music on it is almost 100% gone. I hate packing peanuts so Berk WTF? Really, why did you use packing peanuts to ship an exhaust?

I do not have many pictures currently (none of the pieces but there are plenty of those), mainly because my camera died the moment I turned it on to start taking pictures.

vipor · 03-09-2010, 10:20 AM

Eww you should never use peanuts to ship anything heavy. No bueno...

Why the hell couldn't you get that in before the meet dammit. Wanna hear it. I know FI and Stillen sound good IRL, but I haven't heard a Berk.

BTW my roomie likes your [stock] wheels. Guess he hadn't seen them before.

Matt · 03-09-2010, 10:21 AM

Your enthusiasm seems to be withheld. Was it because of the extended wait for the exhaust? Maybe just didn't feel like using "!!!!" at the end of everything?

02-21-2010, 10:59 AM	#122 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Once you have a little bit of go why not add a little bit of show __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

02-28-2010, 01:30 PM	#124 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	SRP Racing Pedals - Grid: ~It has been about a week since I installed my new pedals, and thank you Modshack for the DIY and being the first, but I really love these pedals. At first I was not overly impressed with them, but I changed how my feet sit on the pedals and wow it changed everything. I still have enough wiggle room to adjust my feet if they do not feel right, but when my foot goes down on a pedal it stays on the pedal. I got to test this morning a short drive without shoes on and my feet were fine after getting out. Overall I am really impressed, the only pedal I have not installed is the dead pedal since it was late the night we installed them and did not have much light. Not the best pictures, but my POS camera could not find anything to focus on. A new addition to the car this weekend, worth 100whp, is my ricer stickers. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram Last edited by theDreamer; 02-28-2010 at 01:39 PM.

02-28-2010, 01:56 PM	#126 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Nope, I am still waiting on my exhaust and long tube headers, though the LTH have yet to be delayed and Tony has stated he is still on schedule. It is the exhaust I should have had almost six months ago, but delay after delay has set it back. For me forced induction will come after the 3 year warranty is up, even though it does not matter since I have almost done enough to void any warranty I have, but I would just like to wait and see the kits hit the market, reviewed, etc. In the meantime I will be adding supporting mods, oil cooler, clutch/flywheel, etc. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

02-28-2010, 01:58 PM	#128 (permalink)
Togo A True Z Fanatic Join Date: May 2009 Location: E. Northport, NY Posts: 7,597 Drives: Stuff Rep Power: 657	Dreamer, where did you order the pedals from? How did you have to change your foot position to get the better feel. As in where was your foot before vs now? Over all they look very nice. The car is coming along really nicely. I can't wait to hear the combo of FI LTH and Berk exhaust. I think that will make for an excellent combo! __________________ This will decimate all after you put about fifteen grand in it or more, and if we have to, overnight parts from Japan. Joe Clem and Koeppel Nissan

03-09-2010, 09:47 AM	#133 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Well it finally arrived, and installed. Berk exhaust is on the car and sounding great. Install: ~The install was extremely straight forward, no instruction provided, but you do not need any. Basically get the rear of the car high enough and unbolt old and bolt the new one on. Overall it took us just under two hours but that also included waiting for a jack as the one we had did not go high enough. Thoughts: ~The exhaust sounds great, I am really bad at describing it but I will say I like it and that is all that matters. The look of the pieces are great, installed it looks exactly like stock which may be a good or bad thing. Negatives ~I did find a very very small amount of drone in 6th gear at 55mph but anything above or below that I do not hear it, and with music on it is almost 100% gone. I hate packing peanuts so Berk *WTF*? Really, why did you use packing peanuts to ship an exhaust? I do not have many pictures currently (none of the pieces but there are plenty of those), mainly because my camera died the moment I turned it on to start taking pictures. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

03-09-2010, 10:20 AM	#134 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Eww you should never use peanuts to ship anything heavy. No bueno... Why the hell couldn't you get that in before the meet dammit. Wanna hear it. I know FI and Stillen sound good IRL, but I haven't heard a Berk. BTW my roomie likes your [stock] wheels. Guess he hadn't seen them before. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

03-09-2010, 10:21 AM	#135 (permalink)
Matt A True Z Fanatic Join Date: Oct 2009 Location: Augusta, GA Age: 41 Posts: 1,680 Drives: 2010 Avalanche LT Rep Power: 19	Your enthusiasm seems to be withheld. Was it because of the extended wait for the exhaust? Maybe just didn't feel like using "!!!!" at the end of everything? __________________ "Any man who can drive a 370z while kissing a pretty girl is simply not giving the Z the attention it deserves." Albert Einstein....modified.