Skeeterbop

Skeeterbop · 11-24-2011, 08:27 AM

Here is the DIY for getting your side markers done like i have mine.
Step 1: Remove the side markers from the car. (Dallaz has a good diagram of how to do this in his build thread.)

Step 2: Mask off the area you don't want plastidip on. This is the most time consuming part of the whole process since the results are directly affected by the quality of your masking job.

Step 3: Spray on the plastidip. I did a real nice and thick coat.

Step 4: Peel off the tape immediately!! If you let it dry before peeling it will stretch and gives the edges a really crappy look. Once the tape is peeled off let it dry for about 20-30 minutes.

Step 5: Repeat steps 2-4 until you are happy with it. Remember if you don't like it, you can simply peel it off.

11-24-2011, 08:27 AM	#11 (permalink)
Skeeterbop A True Z Fanatic Join Date: Jan 2011 Location: Fort Bliss, TX Age: 41 Posts: 1,440 Drives: 2011 GM 370 base SP Rep Power: 17	Here is the DIY for getting your side markers done like i have mine. Step 1: Remove the side markers from the car. (Dallaz has a good diagram of how to do this in his build thread.) Step 2: Mask off the area you don't want plastidip on. This is the most time consuming part of the whole process since the results are directly affected by the quality of your masking job. Step 3: Spray on the plastidip. I did a real nice and thick coat. Step 4: Peel off the tape immediately!! If you let it dry before peeling it will stretch and gives the edges a really crappy look. Once the tape is peeled off let it dry for about 20-30 minutes. Step 5: Repeat steps 2-4 until you are happy with it. Remember if you don't like it, you can simply peel it off. __________________ Srenity: "Yeah no rest needed to spread the love when your 20 that's for sure...."