M.Bonanni Project 370Z V3.0 | Clean Slate

M.Bonanni · 08-08-2011, 07:04 PM

I suppose I could spray my mirror caps for the time being until I get that FX Carbon Fiber film on them...

onzedge · 08-08-2011, 07:18 PM

Quote:

Originally Posted by M.Bonanni

I suppose I could spray my mirror caps for the time being until I get that FX Carbon Fiber film on them...

MD-370z · 08-08-2011, 08:21 PM

Do you have any tips for doing plasti dip on the door handles? did you remove the handles? and if not what did you tape up to make sure not to jam the mechanism?

M.Bonanni · 08-08-2011, 08:54 PM

Quote:

Originally Posted by MD-370z

Do you have any tips for doing plasti dip on the door handles? did you remove the handles? and if not what did you tape up to make sure not to jam the mechanism?

I just did it the same way I did the emblems. Mask around the general area and spray it on. Nothing jammed or even came close to jamming. Somehow this stuff is magical haha. The overspray that went in the door jam I just wiped off with a rag.

M.Bonanni · 08-09-2011, 04:25 PM

Odyssey PC680 installed!

More plasti-dip goodness coming in a few hours too...

M.Bonanni · 08-09-2011, 05:32 PM

And now here's the rest of the stuff I plasti-dipped today. Did the Z emblems and peeled off the area covering the light portion just leaving the Z and outer ring black...

And did the front fangs which turned out ok. Up close the edges didn't do so well and it looks like a poor masking job but it turned out good enough for now. I will eventually switch to a better solution.

And the whole package...

SPOHN · 08-09-2011, 06:14 PM

I like the side emblems. Need to do that myself.

M.Bonanni · 08-17-2011, 03:44 PM

So I think that some front upper control arms are next on the list for my Z, but having a bit of a debate with myself so I wanted to see if anyone else wanted to weigh in.

We all know our options are VERY limited for this part, we basically have two options...

1. SPC Performance - I had these on my car before and HATED them. They wouldn't hold my camber settings, they were super hard to make adjustments on, and they were near impossible to get any accuracy out of when you did try and dial in your settings. It's just a terrible design, but the benefit is they did offer a big range of adjustment.

2. Kinetix Racing - Haven't heard much about these ones but from the looks of it, the design is MUCH MUCH better than the SPC and the price is right. It looks to be easy to adjust, even with the wheel on the car still and doesn't share the same flaws as the SPC. These would be a no brainer EXCEPT they have one major flaw and that is they only offer 1.5 degrees of adjustment in each direction over the stock arm. At my ride height, I am sitting at -0.9 degrees negative camber on the stock arms which means I will max out at -2.4 degrees which is decent, but I fear I will need to be more in the -3.0 range for optimal use.

So I really think both are a waste of money for what I want them for but which one is less of a waste of money? I think I am still leaning toward the Kinetix. I know that A.M. Performance plans on eventually offering their arms that they made for their GrandAm cars but I fear those won't be available for some time and when they are available they will be way out of my price range.

I never took the time to do proper tire temp monitoring/alignment specs on my 370Z the last time I had it built up for time attack so I am not sure what the proper ballpark range is for front negative camber but maybe Travis or someone can chime in and let me know if they are around the -3.0 degree mark. I know it will vary a little depending on the rest of the car/track/tires/etc. but if everyone else is ideally around 3.0 or more then 2.4 will be way off the mark.

ChrisSlicks · 08-17-2011, 03:54 PM

FWIW I'm at about 3.5 degrees and that seems to be fairly ideal for most tracks, some could even use a little more based on the tire temperature data. Same BC ER coilovers and spring rates as you.

At first I couldn't get the SPC arms to hold a camber setting, but I started torquing them to a higher spec and now they stay put. It is still a pain to make adjustments especially on a lowered car. Usually I'll have to jack the front of the car a little bit, make an adjustment and then recheck where I ended up, takes a lot of time.

christian370z · 08-17-2011, 04:19 PM

The Z is looking great Mike, very clean and mean. Looks like you opened up a whole lot of free space in the battery compartment too!

M.Bonanni · 08-17-2011, 04:25 PM

Quote:

Originally Posted by ChrisSlicks

FWIW I'm at about 3.5 degrees and that seems to be fairly ideal for most tracks, some could even use a little more based on the tire temperature data. Same BC ER coilovers and spring rates as you.

At first I couldn't get the SPC arms to hold a camber setting, but I started torquing them to a higher spec and now they stay put. It is still a pain to make adjustments especially on a lowered car. Usually I'll have to jack the front of the car a little bit, make an adjustment and then recheck where I ended up, takes a lot of time.

That seems pretty aggressive. Did you arrive at those settings by taking tire temps? What tires are you using?

As for the SPC arms, I tightened them as hard as I could, even using big breaker bars and they still didn't hold on a bumpy track.

Quote:

Originally Posted by christian370z

The Z is looking great Mike, very clean and mean. Looks like you opened up a whole lot of free space in the battery compartment too!

Thanks!

ChrisSlicks · 08-17-2011, 04:42 PM

Quote:

Originally Posted by M.Bonanni

That seems pretty aggressive. Did you arrive at those settings by taking tire temps? What tires are you using?

As for the SPC arms, I tightened them as hard as I could, even using big breaker bars and they still didn't hold on a bumpy track.

I use Nitto NT-01's and Kuhmo V710's. The camber is fine for the Nitto's but the 710's could use a little more. Yes the data is based on taking tire temps after the session. -3.0 would probably be plenty for street tires.

I agree that there should be a better locking mechanism, there is no friction surface or lock washer. This last time around mine have stayed put through some pretty rough tracks. Perhaps something could be added to increase the friction on the lock mechanism, not sure what though.

Mike · 08-17-2011, 05:47 PM

My alignment shop told me to stay away from kinetic, they are crap. The old dude who does the race alignments doesn't mince words. Daisuke won't go there for an alignment because he told him 20s are stupid on a Z, but he knows his stuff.

travisjb · 08-17-2011, 06:46 PM

My SPC arms are holding camber adjustment... but I agree the design is clumsy as hell and no one thought through the need some of us have to tweak camber at the track with tires on... I actually welded together a dedicated tool using an old breaker bar and socket, and now I bring it with me to track and can make changes with tires on... I'm sure I'll end up striping the but at some point but works for now.

If A.M. offered the part, I'd upgrade

M.Bonanni · 08-18-2011, 12:02 AM

Damn, now I am back on the fence with it... I have a really hard time spending money on something I already know I hate.

08-08-2011, 07:04 PM	#61 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	I suppose I could spray my mirror caps for the time being until I get that FX Carbon Fiber film on them... __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-09-2011, 04:25 PM	#65 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	Odyssey PC680 installed! More plasti-dip goodness coming in a few hours too... __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-09-2011, 05:32 PM	#66 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	And now here's the rest of the stuff I plasti-dipped today. Did the Z emblems and peeled off the area covering the light portion just leaving the Z and outer ring black... And did the front fangs which turned out ok. Up close the edges didn't do so well and it looks like a poor masking job but it turned out good enough for now. I will eventually switch to a better solution. And the whole package... __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-09-2011, 06:14 PM	#67 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I like the side emblems. Need to do that myself. __________________

08-17-2011, 03:44 PM	#68 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	So I think that some front upper control arms are next on the list for my Z, but having a bit of a debate with myself so I wanted to see if anyone else wanted to weigh in. We all know our options are VERY limited for this part, we basically have two options... 1. SPC Performance - I had these on my car before and HATED them. They wouldn't hold my camber settings, they were super hard to make adjustments on, and they were near impossible to get any accuracy out of when you did try and dial in your settings. It's just a terrible design, but the benefit is they did offer a big range of adjustment. 2. Kinetix Racing - Haven't heard much about these ones but from the looks of it, the design is MUCH MUCH better than the SPC and the price is right. It looks to be easy to adjust, even with the wheel on the car still and doesn't share the same flaws as the SPC. These would be a no brainer EXCEPT they have one major flaw and that is they only offer 1.5 degrees of adjustment in each direction over the stock arm. At my ride height, I am sitting at -0.9 degrees negative camber on the stock arms which means I will max out at -2.4 degrees which is decent, but I fear I will need to be more in the -3.0 range for optimal use. So I really think both are a waste of money for what I want them for but which one is less of a waste of money? I think I am still leaning toward the Kinetix. I know that A.M. Performance plans on eventually offering their arms that they made for their GrandAm cars but I fear those won't be available for some time and when they are available they will be way out of my price range. I never took the time to do proper tire temp monitoring/alignment specs on my 370Z the last time I had it built up for time attack so I am not sure what the proper ballpark range is for front negative camber but maybe Travis or someone can chime in and let me know if they are around the -3.0 degree mark. I know it will vary a little depending on the rest of the car/track/tires/etc. but if everyone else is ideally around 3.0 or more then 2.4 will be way off the mark. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-08-2011, 08:21 PM	#63 (permalink)
MD-370z Base Member Join Date: Apr 2009 Location: canada Posts: 137 Drives: 370z,MB, sport, m6, Rep Power: 16	Do you have any tips for doing plasti dip on the door handles? did you remove the handles? and if not what did you tape up to make sure not to jam the mechanism?

08-17-2011, 03:54 PM	#69 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	FWIW I'm at about 3.5 degrees and that seems to be fairly ideal for most tracks, some could even use a little more based on the tire temperature data. Same BC ER coilovers and spring rates as you. At first I couldn't get the SPC arms to hold a camber setting, but I started torquing them to a higher spec and now they stay put. It is still a pain to make adjustments especially on a lowered car. Usually I'll have to jack the front of the car a little bit, make an adjustment and then recheck where I ended up, takes a lot of time. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

08-17-2011, 04:19 PM	#70 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	The Z is looking great Mike, very clean and mean. Looks like you opened up a whole lot of free space in the battery compartment too! __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

08-17-2011, 05:47 PM	#73 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	My alignment shop told me to stay away from kinetic, they are crap. The old dude who does the race alignments doesn't mince words. Daisuke won't go there for an alignment because he told him 20s are stupid on a Z, but he knows his stuff. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

08-17-2011, 06:46 PM	#74 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	My SPC arms are holding camber adjustment... but I agree the design is clumsy as hell and no one thought through the need some of us have to tweak camber at the track with tires on... I actually welded together a dedicated tool using an old breaker bar and socket, and now I bring it with me to track and can make changes with tires on... I'm sure I'll end up striping the but at some point but works for now. If A.M. offered the part, I'd upgrade __________________ 2009 370Z #104 For Sale

08-18-2011, 12:02 AM	#75 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	Damn, now I am back on the fence with it... I have a really hard time spending money on something I already know I hate. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Project-Definition 370Z	definitionxmk	Member's 370Z Gallery	227	08-10-2014 01:30 PM
ilive2win's 370z project	ilive2win	Member's 370Z Gallery	495	04-08-2013 03:34 PM
COBB Tuning Sponsors Bonanni Motorsports!	COBB Tuning	Nissan 370Z General Discussions	14	03-18-2010 11:31 AM
DDM Project 370Z	M.Bonanni	Member's 370Z Gallery	617	01-07-2010 07:50 PM
Base 370Z owners ONLY: How clean is your door side panels?	AK370Z	Exterior & Interior	21	07-06-2009 09:56 PM