2theextreme's Yellow & Blue 370Z

2theextreme · 04-10-2010, 04:09 PM

Quote:

Originally Posted by Marco@MRWorks

oh my! your car is one of a kind tony! Congrats! i love how everything came out!

Thank you, Marco! Please tell Ryan thanks for me, too. It's amazing in person....that's all I can say! I regret nothing that I've done to my baby. I will get my old OEM headlights boxed up this weekend and sent to you next week. I'm sure they are already accounted for by someone on here.....and if they aren't......let me just say to everyone......these headlights are beautifully done and MR Works did one hell of a job on 'em!

2theextreme · 04-10-2010, 05:11 PM

Quick set of shots from earlier today @ our Mid-Atlantic Starbuck's Saturday meet:

The first two were taken in the driveway before heading off to Starbuck's:

In the parking lot:

Finally remembered to take a picture of one of the Z1 Silicone Radiator Hoses:

m4a1mustang · 04-10-2010, 05:13 PM

Car looked great, man!

Tint and the correct camber made a world of a difference.

2theextreme · 04-10-2010, 05:18 PM

Quote:

Originally Posted by m4a1mustang

Car looked great, man!

Tint and the correct camber made a world of a difference.

And I was adamant about not doing either......glad I did both now!

fullmonty · 04-10-2010, 05:48 PM

Very nice man!

tjlazer · 04-10-2010, 09:53 PM

Awesome! MB FTMFW!!

2theextreme · 04-10-2010, 11:35 PM

Quote:

Originally Posted by tjlazer

Awesome! MB FTMFW!!

dlmartin81 · 04-11-2010, 12:40 AM

Great looking car!

2theextreme · 04-15-2010, 11:12 PM

I've had a few people ask about the rear valence (or diffuser as some like to call it) so here are some photos. This is an overlay, however to install this piece you will need to drill holes in your bumper.

Looking from above down by the rear fog light:

Looking from above down by the drivers side exhaust pipe:

Looking down at the driver & passenger sides:

Angles of the screws and holes drilled into my bumper during install:

Note that the screws were supplied by the autobody shop. The ones that came with the overlay were not long enough to use. Not saying this would be the case for everyone but in my particular case it was. An easy problem to resolve...so not a real big deal. And yes, I am aware of the slight gap that is visible in the photos. I did have another member tell me that this is not the first time the space is visible after installing this particular valence.

Caravanshaka · 04-16-2010, 04:37 PM

Tony, hate to say it man, but that doesn't look like it is fitting correctly. The edge should follow the groove in the bumper all the way across. Basically, the edge should sit inside that groove.

ilive2win · 04-16-2010, 04:45 PM

looking good! i need to catch up to you quick haha

2theextreme · 04-16-2010, 05:01 PM

Quote:

Originally Posted by Caravanshaka

Tony, hate to say it man, but that doesn't look like it is fitting correctly. The edge should follow the groove in the bumper all the way across. Basically, the edge should sit inside that groove.

But if you look at the section that's covering the fog light it's perfect.....not much more can be done. CF can't be stretched...which is what looks like is needed with this one. I'm a little disappointed but from straight on it looks good. I may contact EVO-R and have them look at the photos. At least see what they say.

Caravanshaka · 04-16-2010, 05:03 PM

Quote:

Originally Posted by 2theextreme

But if you look at the section that's covering the fog light it's perfect.....not much more can be done. CF can't be stretched...which is what looks like is needed with this one. I'm a little disappointed but from straight on it looks good. I may contact EVO-R and have them look at the photos. At least see what they say.

ya, I would. I wasn't saying it was an install problem, looked like a mold problem mating to your bumper. Mention it and see what they say, can't hurt!

FuszNissan · 04-16-2010, 05:52 PM

Tony the Smurf looks hot!!!!

2theextreme · 04-16-2010, 06:01 PM

Quote:

Originally Posted by Caravanshaka

ya, I would. I wasn't saying it was an install problem, looked like a mold problem mating to your bumper. Mention it and see what they say, can't hurt!

Ah ok.....misunderstood ya!

Yeah, I'm guessing it's a mold issue. Even the front part that covers the fangs sometimes needs to be shaved down because the lower lip makes it hard to slide the overlay on. I got lucky and my front CF parts worked well.

Again, I'm not too worried. Who knows....maybe I'll get a Version 2 or something!

04-10-2010, 05:11 PM	#212 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 67	Quick set of shots from earlier today @ our Mid-Atlantic Starbuck's Saturday meet: The first two were taken in the driveway before heading off to Starbuck's: In the parking lot: Finally remembered to take a picture of one of the Z1 Silicone Radiator Hoses: __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips Last edited by 2theextreme; 04-10-2010 at 05:56 PM.

04-10-2010, 05:13 PM	#213 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	Car looked great, man! Tint and the correct camber made a world of a difference. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

04-10-2010, 05:48 PM	#215 (permalink)
fullmonty A True Z Fanatic Join Date: Nov 2009 Location: Dirty Jersey Posts: 7,762 Drives: 370 Touring/Sport Rep Power: 34	Very nice man! __________________

04-10-2010, 09:53 PM	#216 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	Awesome! MB FTMFW!! __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

04-16-2010, 04:37 PM	#220 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Tony, hate to say it man, but that doesn't look like it is fitting correctly. The edge should follow the groove in the bumper all the way across. Basically, the edge should sit inside that groove. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

04-11-2010, 12:40 AM	#218 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 43 Posts: 923 Drives: 09 370Z Rep Power: 608	Great looking car!

04-16-2010, 04:45 PM	#221 (permalink)
ilive2win Track Member Join Date: Jul 2009 Location: san diego Posts: 872 Drives: 11WWX Rep Power: 17	looking good! i need to catch up to you quick haha

04-16-2010, 05:52 PM	#224 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	Tony the Smurf looks hot!!!! __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Chicane Yellow 370Z Thread	xDIEGOx	Nissan 370Z Photos / Spyshots / Video / Media Gallery	252	06-12-2021 07:53 PM
Monterey Blue vs. Laguna Seca Blue	smurfblu13	Nissan 370Z General Discussions	28	05-13-2011 09:56 PM
Woot! New 370z YELLOW owner!	rackley	New 370Z Owner	1	04-11-2009 09:48 PM
Looking for a fully loaded Chicane Yellow 370Z	JohnnyD	Nissan 370Z Pricing / Ordering Discussions	5	03-31-2009 06:14 PM
Yellow 370Z	cstr_Cali	Nissan 370Z Photos / Spyshots / Video / Media Gallery	7	11-08-2008 08:10 PM