wstar's Journal

wstar · 10-24-2011, 04:13 PM

Edit: where do the swaybars end up hitting the tray when mobile?

ChrisSlicks · 10-24-2011, 04:22 PM

Quote:

Originally Posted by wstar

Edit: where do the swaybars end up hitting the tray when mobile?

As the end link is pushed up when compressed, the center section of the sway bar is pushed down by a similar amount. Compress the front suspension unevenly such as entering a harsh driveway or a track transition and you will hear a loud "thunk" as the center of the sway hits the tray. Eventually the noise stops once the sway bar has bashed the undertray into the desired shape

wstar · 10-24-2011, 04:24 PM

Ah I might get saved on that a bit for now, being on the stock super-tall suspension still. Probably gets worse as you drop the car down

wstar · 10-26-2011, 06:45 PM

Just got through getting a tech inspection form filled out for my Driver's Edge class. Took the car down to Nevrslo to have them do it, since TDE requires an actual SAE mechanic to sign off.

They're like 5 minutes away from me and I had never been down to their shop. It's a small shop, but I was pretty impressed with them overall. They had at least two of their drift track cars on display, and a lot of quality parts on the shelf. It's just refreshing to walk into a shop where they can point at two obvious full-on track machines sitting fully assembled out on the floor and say "yeah we did all the fabrication and mechanic work on these, and we run them in real events". The cars also happened to be a 350Z and heavily modded S14 or 240 (whichever it was it was hard to tell at this point, to me anyways. It also had an LS1 engine swapped into it), so they know Nissan stuff.

They're definitely my new favorite option for when it comes time to put a cage in this car, etc.

wstar · 11-02-2011, 09:58 AM

Been trying to get my oil pressure gauge installed in time for the Driver's Edge class this weekend. I've done all the electronics and interior stuff days ago, but I've been holding off on my oil change and sensor install pending parts. I ordered two sets of pipe fitting parts from two different vendors, one that assumes the car's threads are NPT and one that assumes they're BSPT, so that I can sort it out during the oil change and I've definitely got whatever I need to finish the job.

The NPT hardware is here, but the BSPT still isn't, and now things are getting down to the wire. The BSPT hardware came from McMaster Carr, and UPS was supposed to deliver it two days ago on Monday, but they seem to have failed at that completely (it seems to be indefinitely "on the truck for delivery"). I have to drive down to the class late Friday afternoon.

The good news though, is apparently McMaster Carr has some of the best customer service I've ever seen on the phone. This is my first order with them ever, and it's a whole $16 order. One 5 minute phone call explaining about the UPS delay (and I didn't even get into how urgent this was for me personally) and they said they'd get in touch with UPS from their side, sort out what's happening, and if necessary re-ship new parts to me overnight to get them here tomorrow (Thursday) for sure. They re-iterated that one way or another, there's no way they wouldn't get this fixed and have the parts in my hands Thursday. Awesome stuff, I'm going to order everything I can through these guys in the future

10-24-2011, 04:13 PM	#1 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Edit: where do the swaybars end up hitting the tray when mobile? __________________ 7AT Track Car! Journal thread / Car setup details Last edited by wstar; 10-24-2011 at 04:16 PM.

10-24-2011, 04:24 PM	#3 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Ah I might get saved on that a bit for now, being on the stock super-tall suspension still. Probably gets worse as you drop the car down __________________ 7AT Track Car! Journal thread / Car setup details

10-26-2011, 06:45 PM	#4 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Just got through getting a tech inspection form filled out for my Driver's Edge class. Took the car down to Nevrslo to have them do it, since TDE requires an actual SAE mechanic to sign off. They're like 5 minutes away from me and I had never been down to their shop. It's a small shop, but I was pretty impressed with them overall. They had at least two of their drift track cars on display, and a lot of quality parts on the shelf. It's just refreshing to walk into a shop where they can point at two obvious full-on track machines sitting fully assembled out on the floor and say "yeah we did all the fabrication and mechanic work on these, and we run them in real events". The cars also happened to be a 350Z and heavily modded S14 or 240 (whichever it was it was hard to tell at this point, to me anyways. It also had an LS1 engine swapped into it), so they know Nissan stuff. They're definitely my new favorite option for when it comes time to put a cage in this car, etc. __________________ 7AT Track Car! Journal thread / Car setup details Last edited by wstar; 10-26-2011 at 07:12 PM.

11-02-2011, 09:58 AM	#5 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Been trying to get my oil pressure gauge installed in time for the Driver's Edge class this weekend. I've done all the electronics and interior stuff days ago, but I've been holding off on my oil change and sensor install pending parts. I ordered two sets of pipe fitting parts from two different vendors, one that assumes the car's threads are NPT and one that assumes they're BSPT, so that I can sort it out during the oil change and I've definitely got whatever I need to finish the job. The NPT hardware is here, but the BSPT still isn't, and now things are getting down to the wire. The BSPT hardware came from McMaster Carr, and UPS was supposed to deliver it two days ago on Monday, but they seem to have failed at that completely (it seems to be indefinitely "on the truck for delivery"). I have to drive down to the class late Friday afternoon. The good news though, is apparently McMaster Carr has some of the best customer service I've ever seen on the phone. This is my first order with them ever, and it's a whole $16 order. One 5 minute phone call explaining about the UPS delay (and I didn't even get into how urgent this was for me personally) and they said they'd get in touch with UPS from their side, sort out what's happening, and if necessary re-ship new parts to me overnight to get them here tomorrow (Thursday) for sure. They re-iterated that one way or another, there's no way they wouldn't get this fixed and have the parts in my hands Thursday. Awesome stuff, I'm going to order everything I can through these guys in the future __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TravisJB Journal	travisjb	Member's 370Z Gallery	1977	11-03-2017 09:39 AM
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM
LiquidZ's Journal	LiquidZ	Member's 370Z Gallery	22	05-22-2009 11:42 PM