TravisJB Journal

travisjb · 05-14-2009, 10:34 PM

no, but I remember you and SOMEONE ELSE talking about the mount... maybe it was Alan or Wstar ???

I'm using a chasecam, it comes with its own mount setup...

I'm 50/50 for my event this weekend... if I go, will def have video...

wstar · 05-14-2009, 11:00 PM

It was me, I have the mount. Haven't shot any good video with it yet though.

travisjb · 05-17-2009, 02:47 AM

Anyone try putting speedbleeder valves on yet ? Automobile Applications

Guessing we need this one SB1010

ChrisSlicks · 05-17-2009, 10:06 AM

Seems like a good idea, although if you buy 8 of the stainless pieces you're half way to buying a power bleeder.

travisjb · 05-20-2009, 12:21 AM

Updates... my car is with Redline Motorsports right now... MANY projects going on... highlights

1- the first set of upper control arms from SPC did not fit... SPC sent another set and THEY FIT PERFECT!!! I believe the second set are the same part from the G35, but LET ME VERIFY before you do anything rash! will update here later UPDATE... SPC CONTROL ARMS FROM G37 SEDAN FIT OUR CAR, BUT THE G37 COUPE PART DOES NOT FIT

2- the coilovers are installed and look great... with multi-link in the rear, it is really not possible to adjust ride height lower than what is natural for the spring, but you can increase height somewhat by adjusting the collar on the rear dampers... the fronts are obviously freely adjustable for ride height... this issue will be the same regardless of coilover... ultimately though, we think it won't matter, as these coilovers/springs in the rear are set where they need to be - if a bit on the low side... we bumped it up just a hair... will get pics later

With front/rear SPC parts and coilovers, I'm now free to make most of the adjustments I need... To take it one step further, I may look into the SPC rear toe bolts that DDM is selling DDM Project 370Z

3- Redline is preparing a dual core oil cooler, parallel flow setup for me... the advantage of this setup I understand is that it allows a higher flow rate than running through one, then another, then back... instead it will run simultaneously through both cores and return oil more quickly... we are also installing a 52mm Defi pressure gauge defi red racer pressure DF06602 - Google Product Search we'll see if this works! seems like it will look perfect in place of the clock !

4- Big news !!! DDM shipped me JWT clutch and JWT flywheel... they were installed today and fit PERFECT... the car was on the lift as of 5pm when i stopped by the shop, so there has not yet been any test drive or whatever, but everything fits and that's a good start !

5- Along with the clutch and flywheel, i had them install a different clutch cable and pilot bearing c/o IIP... should allow me to position the clutch pedal in a better position for my personal preference and the bearing is said to be an upgrade and perhaps eliminates the 'clanking' noise when you press the clutch in... we'll see... will be hard to attribute the changes considering all the stuff we're swapping

6- Surprise ! I'm also having a Carbonetic 1.5 LSD installed this week... Mike sold me on the idea, and Sharif at Forged Performance sold me the diff... Thanks to both ! We are waiting on a few extra parts that are needed for the install, but I'm hoping it is in by tomorrow or THUR

7- various other bits going in like underdrive pulley and GTSpec bracing

I've got my track mate and chase cam all ready to drop in whenever I get the car back... tested it on my 15 month old's plastic car... pushed him around the neighborhood, with horrified neighbors wondering why we were going so fast and why he had electronics and a big *** battery strapped to his toddler-mobile !

Here's the updated project list

510z · 05-20-2009, 01:44 AM

Youll have to let me know next time you go to PIR. I want to see your car in action

travisjb · 05-20-2009, 01:49 AM

will do! PIR is usually with nasa, and they won't be back at pir till sep... have some runs at firebird and maybe alberquerque, vegas and cali this summer

RCZ · 05-20-2009, 12:47 PM

Cant wait to hear the results of the clutch install

Please do find out which front control arms fit.

M.Bonanni · 05-20-2009, 12:48 PM

Quote:

Originally Posted by RCZ

Cant wait to hear the results of the clutch install

+1

Might have to put off my LSD install for a bit then if we need extra parts

.

imag · 05-21-2009, 12:40 AM

Wow. Nice set of parts. I'm anxious to hear what the clutch/flywheel upgrades do.

A real dif should be nice...

leepeen · 05-21-2009, 12:48 AM

I think i know who you are! Do you work at Jonker Nissan?

travisjb · 05-21-2009, 01:00 AM

umm, nope... don't even know where that is

wstar · 05-21-2009, 01:05 AM

Uhm, leepeen and Jonker Nissan are in Canada. Travis is in AZ

Redlinewins · 05-21-2009, 01:26 PM

Quote:

Originally Posted by RCZ

Please do find out which front control arms fit.

Correct SPC front control arms that will fit the 370Z are the same used for the following model: 08 to 09 G37 sedan.

M.Bonanni · 05-21-2009, 01:27 PM

Quote:

Originally Posted by Redlinewins

Correct SPC front control arms that will fit the 370Z are the same used for the following model: 08 to 09 G37 sedan.

So which ones did they send the first time that didn't work?

05-14-2009, 10:34 PM	#136 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	no, but I remember you and SOMEONE ELSE talking about the mount... maybe it was Alan or Wstar ??? I'm using a chasecam, it comes with its own mount setup... I'm 50/50 for my event this weekend... if I go, will def have video... __________________ 2009 370Z #104 For Sale

05-14-2009, 11:00 PM	#137 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	It was me, I have the mount. Haven't shot any good video with it yet though. __________________ 7AT Track Car! Journal thread / Car setup details

05-17-2009, 02:47 AM	#138 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Anyone try putting speedbleeder valves on yet ? Automobile Applications Guessing we need this one SB1010 __________________ 2009 370Z #104 For Sale

05-20-2009, 12:21 AM	#140 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Updates... my car is with Redline Motorsports right now... MANY projects going on... highlights 1- the first set of upper control arms from SPC did not fit... SPC sent another set and THEY FIT PERFECT!!! I believe the second set are the same part from the G35, but LET ME VERIFY before you do anything rash! will update here later UPDATE... SPC CONTROL ARMS FROM G37 SEDAN FIT OUR CAR, BUT THE G37 COUPE PART DOES NOT FIT 2- the coilovers are installed and look great... with multi-link in the rear, it is really not possible to adjust ride height lower than what is natural for the spring, but you can increase height somewhat by adjusting the collar on the rear dampers... the fronts are obviously freely adjustable for ride height... this issue will be the same regardless of coilover... ultimately though, we think it won't matter, as these coilovers/springs in the rear are set where they need to be - if a bit on the low side... we bumped it up just a hair... will get pics later With front/rear SPC parts and coilovers, I'm now free to make most of the adjustments I need... To take it one step further, I may look into the SPC rear toe bolts that DDM is selling DDM Project 370Z 3- Redline is preparing a dual core oil cooler, parallel flow setup for me... the advantage of this setup I understand is that it allows a higher flow rate than running through one, then another, then back... instead it will run simultaneously through both cores and return oil more quickly... we are also installing a 52mm Defi pressure gauge defi red racer pressure DF06602 - Google Product Search we'll see if this works! seems like it will look perfect in place of the clock ! 4- Big news !!! DDM shipped me JWT clutch and JWT flywheel... they were installed today and fit PERFECT... the car was on the lift as of 5pm when i stopped by the shop, so there has not yet been any test drive or whatever, but everything fits and that's a good start ! 5- Along with the clutch and flywheel, i had them install a different clutch cable and pilot bearing c/o IIP... should allow me to position the clutch pedal in a better position for my personal preference and the bearing is said to be an upgrade and perhaps eliminates the 'clanking' noise when you press the clutch in... we'll see... will be hard to attribute the changes considering all the stuff we're swapping 6- Surprise ! I'm also having a Carbonetic 1.5 LSD installed this week... Mike sold me on the idea, and Sharif at Forged Performance sold me the diff... Thanks to both ! We are waiting on a few extra parts that are needed for the install, but I'm hoping it is in by tomorrow or THUR 7- various other bits going in like underdrive pulley and GTSpec bracing I've got my track mate and chase cam all ready to drop in whenever I get the car back... tested it on my 15 month old's plastic car... pushed him around the neighborhood, with horrified neighbors wondering why we were going so fast and why he had electronics and a big *** battery strapped to his toddler-mobile ! Here's the updated project list __________________ 2009 370Z #104 For Sale Last edited by travisjb; 05-25-2009 at 07:39 AM.

05-20-2009, 01:49 AM	#142 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	will do! PIR is usually with nasa, and they won't be back at pir till sep... have some runs at firebird and maybe alberquerque, vegas and cali this summer __________________ 2009 370Z #104 For Sale

05-17-2009, 10:06 AM	#139 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Seems like a good idea, although if you buy 8 of the stainless pieces you're half way to buying a power bleeder.

05-20-2009, 01:44 AM	#141 (permalink)
510z Enthusiast Member Join Date: Mar 2009 Location: Phoenix Posts: 328 Drives: 09 370z Blue M6 Rep Power: 16	Youll have to let me know next time you go to PIR. I want to see your car in action

05-20-2009, 12:47 PM	#143 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Cant wait to hear the results of the clutch install Please do find out which front control arms fit. Last edited by RCZ; 05-20-2009 at 12:59 PM.

05-21-2009, 12:40 AM	#145 (permalink)
imag Enthusiast Member Join Date: Mar 2009 Location: Oakland, CA Posts: 446 Drives: up the wall Rep Power: 16	Wow. Nice set of parts. I'm anxious to hear what the clutch/flywheel upgrades do. A real dif should be nice...

05-21-2009, 12:48 AM	#146 (permalink)
leepeen Base Member Join Date: May 2009 Location: Vancouver Posts: 110 Drives: PW 370z Touring A7 Rep Power: 16	I think i know who you are! Do you work at Jonker Nissan?

05-21-2009, 01:00 AM	#147 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	umm, nope... don't even know where that is __________________ 2009 370Z #104 For Sale

05-21-2009, 01:05 AM	#148 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Uhm, leepeen and Jonker Nissan are in Canada. Travis is in AZ __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 11:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 06:44 PM