TravisJB Journal

RCZ · 05-04-2009, 02:09 PM

Quote:

Originally Posted by travisjb

interesting thought - there seems to be plenty of room ! also, can fans be used on these cores?

I've been looking at it...I think it may be the easiest thing we can do if we need a LOT more cooling. If we don't need much more then a bigger single core would be the best choice.

travisjb · 05-04-2009, 03:25 PM

Quote:

Originally Posted by RCZ

I've been looking at it...I think it may be the easiest thing we can do if we need a LOT more cooling. If we don't need much more then a bigger single core would be the best choice.

I've decided to go forward with the second core...

travisjb · 05-04-2009, 10:40 PM

Sharing pics of installed parts...

ZforMe · 05-05-2009, 01:15 AM

Did you purposely leave off the bracket between the cats as pictured below:

*EDIT*

Just realized you have Stillen HFC's, i guess they don't come with mounting points for the bracket.

Seems as though DDM left this bracket off (pic below). Is it needed? Wouldn't it help rigidity?

Edited by AK

M.Bonanni · 05-05-2009, 11:11 AM

The second photo is halfway through the install as you can tell because one of the cats is still off the car. The bracing is re-used with the Berks.

ZforMe · 05-05-2009, 11:44 AM

I guess my eyes aren't too good after midnight, i didn't even notice a cat was missing. haha.

travisjb · 05-09-2009, 04:50 PM

Updated project list... coilovers arrived, should be installed next week or two along with JWT clutch and flywheel... Other parts / projects next couple weeks will be done by Redline for me. Once I get it back, I will install the Traqmate and Chasecam and take those with me to next event. Summer is slow season in AZ for track, so hope to make it out to Vegas or CA for an event or two. Will be interesting to see if I can stuff 4 wheels/tires in the car for the trip ! Maybe if I ditch the passenger seat...

Anyone want me to post pictures of the BC Racing ER coilovers ?

NOTE: FORGESTAR WHEELS ACTUALLY LATE JUNE...

M.Bonanni · 05-09-2009, 08:04 PM

Quote:

Originally Posted by travisjb

Anyone want me to post pictures of the BC Racing ER coilovers ?

I do! Since I didn't even think to take pics of my own lol.

travisjb · 05-10-2009, 12:56 AM

Up'ing pics of my new BC Racing ER Series with external reservoir and secondary pistons. Will have these installed soon, but for now we can all enjoy the pics !

They were shipped direct to me from the factory in Taiwan and arrived Thursday. Directions are minimalistic but clear. Every component on these seems to be top notch and designed for some serious hours and conditions. The last set of coilovers I bought were Bilstein PSS9- these appear to be of the same quality or better. My understanding is that these are serviceable and factory rebuildable. Compression and rebound adjustment both front and back. Ride height and pre-load adjustable!

Elmo to establish scale

CONTACT MIKE AT DOUBLEDOWN MOTORSPORTS FOR MORE INFO
DDMotorsports: Sneak Preview - BC Racing ER Coilovers Installed!!!

ChrisSlicks · 05-10-2009, 09:10 AM

Are those metric Elmo units or standard?

Pics look great! Can't wait for you to bolt them up and take it to the track.

travisjb · 05-10-2009, 10:14 AM

Me too ! Potential track event next weekend, not sure I'll have it done by then - we'll see.

miguez · 05-10-2009, 03:11 PM

Great shots Travis, but how big is an Elmo?

They do look to be of great build quality. Are the adjustments for compression and rebound separate?

Thanks,

travisjb · 05-10-2009, 06:34 PM

Elmo is 18 metric tonnes and about 12" high

Yes, separate adjustments

brgds

RCZ · 05-10-2009, 09:31 PM

This thread always cracks me up with your miniature parts...

Coils look good man, they actually do look like excellent quality.

travisjb · 05-10-2009, 10:20 PM

So that means you're switching from KW V3s ???

05-05-2009, 01:15 AM	#94 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Did you purposely leave off the bracket between the cats as pictured below: EDIT Just realized you have Stillen HFC's, i guess they don't come with mounting points for the bracket. Seems as though DDM left this bracket off (pic below). Is it needed? Wouldn't it help rigidity? Edited by AK __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans. Last edited by ZforMe; 05-05-2009 at 01:21 AM.

05-05-2009, 11:11 AM	#95 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	The second photo is halfway through the install as you can tell because one of the cats is still off the car. The bracing is re-used with the Berks. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

05-05-2009, 11:44 AM	#96 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	I guess my eyes aren't too good after midnight, i didn't even notice a cat was missing. haha. __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.

05-09-2009, 04:50 PM	#97 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Updated project list... coilovers arrived, should be installed next week or two along with JWT clutch and flywheel... Other parts / projects next couple weeks will be done by Redline for me. Once I get it back, I will install the Traqmate and Chasecam and take those with me to next event. Summer is slow season in AZ for track, so hope to make it out to Vegas or CA for an event or two. Will be interesting to see if I can stuff 4 wheels/tires in the car for the trip ! Maybe if I ditch the passenger seat... Anyone want me to post pictures of the BC Racing ER coilovers ? NOTE: FORGESTAR WHEELS ACTUALLY LATE JUNE... Last edited by travisjb; 05-09-2009 at 10:50 PM.

05-10-2009, 12:56 AM	#99 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Up'ing pics of my new BC Racing ER Series with external reservoir and secondary pistons. Will have these installed soon, but for now we can all enjoy the pics ! They were shipped direct to me from the factory in Taiwan and arrived Thursday. Directions are minimalistic but clear. Every component on these seems to be top notch and designed for some serious hours and conditions. The last set of coilovers I bought were Bilstein PSS9- these appear to be of the same quality or better. My understanding is that these are serviceable and factory rebuildable. Compression and rebound adjustment both front and back. Ride height and pre-load adjustable! Elmo to establish scale CONTACT MIKE AT DOUBLEDOWN MOTORSPORTS FOR MORE INFO DDMotorsports: Sneak Preview - BC Racing ER Coilovers Installed!!! Last edited by travisjb; 05-10-2009 at 06:36 PM.

05-04-2009, 10:40 PM	#93 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Sharing pics of installed parts...

05-10-2009, 09:10 AM	#100 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Are those metric Elmo units or standard? Pics look great! Can't wait for you to bolt them up and take it to the track.

05-10-2009, 10:14 AM	#101 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Me too ! Potential track event next weekend, not sure I'll have it done by then - we'll see.

05-10-2009, 03:11 PM	#102 (permalink)
miguez Enthusiast Member Join Date: Apr 2009 Location: Columbus, Ohio Posts: 359 Drives: '04 Cavalier Rep Power: 181	Great shots Travis, but how big is an Elmo? They do look to be of great build quality. Are the adjustments for compression and rebound separate? Thanks,

05-10-2009, 06:34 PM	#103 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Elmo is 18 metric tonnes and about 12" high Yes, separate adjustments brgds

05-10-2009, 09:31 PM	#104 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	This thread always cracks me up with your miniature parts... Coils look good man, they actually do look like excellent quality.

05-10-2009, 10:20 PM	#105 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	So that means you're switching from KW V3s ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 11:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 06:44 PM