TravisJB Journal

Fathead

What spring rates are you track guys running, I know our 550 are not gonna cut it. It turns the splitter into a plow.

Supergoji

well about the fender vents. idk about reducing drag but it im guessing by allowing the air in the fender a place to escape it pulls out the hot air from the fender and allows more air flow to the brakes.

and as far as reducing turbulence again im just guessing but rather than having the air just push out of the wheel well with no place to go is worse then having a specific place where it all flows to. how far did MIT or MTI go with wind tunnel testing?


as far as aero goes look at ferrari aero. full underbody aero trays, vents and scoops in certain places to smooth airflow and reduce drag and increase down force.

if you really wanted to have much better aero, go to home depot and custom make a gurney flap out of door sealer (a line of rubber to keep the cold out) and get some aluminum sheets and make a full body undertray, cut out a few ducts on the rear of the bumper or use the nismo bumper with the vents. and your car will be much more stable at speed. the lower the car the less air that gets under it as well.

travisjb

Update: looking at two options to upgrade suspension... 1) re-valving BC ER's to run at 18K/16K spring rates... and may have the rears converted to true coilovers in the process and 2) switching over to a new setup all together... leaning towards option 1 - have a call in to BC Racing to see what we can figure out

Car is with Junior - rear diff cooling is coming along well.. a few other little projects are underway

__________________
2009 370Z #104
*For Sale*

travisjb

here's a fresh pic

__________________
2009 370Z #104
*For Sale*

Mike

Travis, what is the width of your wing? My APR is 67" and looks a little wide, but that is what they recommended, and I haven't actually seen it in person yet, only the photos the bodyshop emailed me.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

travisjb

Yours is definitely wider, but I don't have a measurement handy and my car is at Junior's... prob 6"

I'm very pleased with this wing from a looks and downforce perspective... at my last event, I was hitting 130mph at the end of the straight and transitioning to a long left hander under moderate braking, and the back end was 100% PLANTED! would highly recommend this wing

__________________
2009 370Z #104
*For Sale*

LateralG'z

Travis, i am loving all the difficult plowing you are doing with your car. You are saving me tons of time and learning.

__________________
2010 Mag Black, 6MT,

travisjb

Thanks. Following your build as well - would use the same exhaust if I were keeping to the street... good progress!

__________________
2009 370Z #104
*For Sale*

Zless@arizona

TravisJB: From your description, it seems that you are braking and initiating the turn simultaneously, then braking at least part way through the turn. This technique adds braking forces and geometry change to already complicated cornering forces. Have you tried that section of track by completing all of your braking while on the straight and running as deep as possible, then accelerating through the turn. This technique will isolate braking to the straight, and allow you to concentrate fully on traction while turning...the result being reduced time on this section and a position (or two)

__________________
The only U.S.A.-available Mobil1 oil that is BMW LL01 is 0W-40...most of M1's engine oil is hydrocracked/GIII junk.

Fathead

Diff cooler update pics.

M.Bonanni

For reference, the wing on my car is 68" wide so it will look virtually the same... HUGE..

Travis/Fathead - The diff cooler stuff looks sweet!

__________________
MikeBonanni.com
Twitter: http://www.twitter.com/MikeBonanni
Facebook: http://www.facebook.com/MBonanni36
Function > Form

travisjb

Thanks Mike!

Junior- hellanicejob!

__________________
2009 370Z #104
*For Sale*

RedNismo

How do you make the parts in your pictures look miniature? They look like toy models.

__________________
2003 Skyline 350GT--Tein Suspension, NRG Strut bar, Nismo CAI w/bypass, JDM emblems, Nismo Graphics...
2009 Nismo Z34 #389-- Clear Bra

ChrisSlicks

He does all his work on a scale model before attempting on the real car.


In reality it is probably the low light that caused the effect. Low light causes the camera to use a wide aperture (lower number) which decreases the focal depth, a similar behavior that happens when shooting minatures up close (but for different reasons).

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms

travisjb

There are forums that go deep on these kinds of topics, so don't want to do that here but the quick story is that I was shooting in near dark with a high quality lens and a canon 5d mark ii. Lens has a great big f-stop and camera has an iso range of like 50 to 25,000... which is crazy... the physics are as chris described, and you can reproduce the effect if you have the right gear or through post-processing

__________________
2009 370Z #104
*For Sale*