Originally Posted by Fathead Car is done, it got a new ecu at the dealer and NOW it can be driven. Dead ECU huh? I had a feeling that was
|
|
LinkBack | Thread Tools | Display Modes |
03-12-2010, 10:56 PM | #814 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
me too!
The car is in great shape for the most part. Junior went above and beyond in many areas. In a week or so I will try to do a full photo shoot so you all can see the details in high res. I will be running in a Porsche DE event tomorrow to see how everything is sorted. First time at this much lower weight (no still don't have an exact number, sorry!). First time with new pads. First time with full cage. First time with splitter and wing. Etc. So the goal is very modest for tomorrow ==> see what works and what doesn't. I'm not out to set any lap records! I also won't have the video/data hooked up for tomorrow, unfortunately, but that should be in for the next event which is 1 week from now. Finally, there is an electronics issue remaining with the car that we still need to figure out. Car registers "N" only for gear select, so the SRM is inop. I'm going to have to use my god-awful heel-toe skills! The three gauges on the top fail to light up. And it seems to me that the power steering is running at 1/3 power at best. But regardless, the car works, so I'm very happy to just have it running! More tomorrow. |
03-13-2010, 10:49 AM | #818 (permalink) |
A True Z Fanatic
Join Date: Feb 2009
Location: Texas
Posts: 30,879
Drives: 370z
Rep Power: 4210 |
That is good, hope you guys get the rest of the system working 100%, but glad to hear the car is running and you can hit the track.
__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram |
03-13-2010, 10:20 PM | #820 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
Turned a 1:04.75 today at Firebird West. I may have done better than that - not sure - I only had someone timing me for a couple laps during 1 one of 5 sessions, so pretty sure he didn't get my best. In any event, course records are below. I am a few seconds off the pace for the course record for my "TTS" class. My car is still 300 pounds over weight (or underpowered) relative to my class limit, so I'm running a lot more like a "TTA" car right now. I also think I can pick up a few tenths with SRM - for some reasons my brass balls factor goes up when I use it. I'm overall happy with the result. Today was just a Porsche Club DE, will do this "for real" next weekend when the people you see listed below will all be lined up to compete!
Will post more thoughts later tonight on remaining mechanical issues to be sorted. Sorry, no vid today. Firedbird International Raceway, West Course Class No. Name Vehicle Time Date TTR 18 Wayne McKeen Corvette 01:02.41 08/08/09 TTU 421 Darrell Rayburn Corvette 01:01.56 08/16/08 TTS 23 Tage Evanson 95 Honda Civic 01:01.39 08/08/09 TTA 524 Brian Turner 78 Porsche 911 01:05.34 08/08/09 TTB 11 Jeremy Renshaw 91 Nissan 240sx 01:06.31 08/16/08 TTC 72 Brady Dohrmann 97 BMW M3 01:05.30 08/08/09 TTD 12 Jeremy Renshaw 91 Nissan 240sx 01:06.58 08/08/09 TTE 133 Kent Durkee Honda CRX 01:07.95 08/08/09 TTF 7 Tage Evanson Honda Accord 01:11.24 08/08/09 |
03-14-2010, 12:02 AM | #821 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
Big stuff
Smaller stuff / lower priority
|
03-14-2010, 12:23 AM | #822 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
Junior, as for the front splitter... it was held up well overall and of course got lots of positive comments from folks at the track... but there are a few issues we need to address
- screw heads stick out on the bottom of the alum plate, and so they are getting shaved off on the asphalt - as a result, there is a danger the splitter will work loose... - and it becomes impossible to remove the screws with hand tools because they are half way shaved - 3 screws completely wasted today... and 1 of the 2 front turnbuckles was disconnected for same reason - I had to put the car on my lift between sessions and grind off what was left of the screw heads so I could drop the splitter - It was very easy to remove the splitter once I did that, so props to you for the quick release setup! that part was perfect! Here's what I would propose: - the 1/8 alum needs to be an absolutely flat surface with no fasteners sticking out beneath it - I think we need to mount the alum to the boatboard with bonding material only - no fasteners - then we cut holes in the alum so we can recess the fasteners that will attach splitter to frame... result = 100% flat surface I ordered fasteners below that we can try:
|
03-14-2010, 09:08 AM | #824 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 |
Both the transmission and the gauges use the CAN bus for communication. You might have to go back on a Consult-III to troubleshoot that one.
I haven't had a chance to push my AP brakes to the limit yet, weather still sucks. Last edited by ChrisSlicks; 03-14-2010 at 10:24 AM. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DannyGT's Journal/Progress | DannyGT | Member's 370Z Gallery | 174 | 10-17-2017 11:25 AM |
RCZ's 370Z Journal. | RCZ | Member's 370Z Gallery | 1743 | 08-10-2013 12:55 AM |
Edmonton Journal Review of the 370Z | BanningZ | Nissan 370Z General Discussions | 13 | 08-09-2009 06:44 PM |