Originally Posted by M.Bonanni I don't think that's the case. If its the same sensor that I am thinking of then I completely removed it when I had my aftermarket
|
|
LinkBack | Thread Tools | Display Modes |
03-04-2010, 02:03 PM | #798 (permalink) |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Marietta, GA
Posts: 840
Drives: 2009 GT-R, 2010 370Z
Rep Power: 18 |
Travis with the key in the on position (dash lights illuminated) is your check engine light on?
Typically, if you KOEO and the fans blast away, the CEL light will NOT be illuminated. This indicates that a critical harness or sensor is not connected or bad. a fuse is blown, or you have a short (which probably caused a fuse to blow). After doing this basic test, it's time to bring in someone with a Consult III, which will immediately uncover the problem.
__________________
Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified |
03-04-2010, 03:24 PM | #800 (permalink) | |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
Sharif, thanks for checking in... We're going to try restoring the steering column lock sensor first, and if that doesn't do it we'll proceed with checking for blown fuses, improperly connected harnesses, and status of CEL light, and report back. -T
Quote:
|
|
03-04-2010, 03:32 PM | #802 (permalink) |
The370Z.com Sponsor
|
Oops read your post too fast. I was thinking steering wheel position sensor, not steering wheel lock sensor.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
03-05-2010, 01:15 AM | #803 (permalink) | |
Base Member
Join Date: Sep 2009
Location: Arizona
Posts: 62
Drives: Chevy Trucks
Rep Power: 16 |
Quote:
|
|
03-05-2010, 09:13 AM | #804 (permalink) |
The370Z.com Sponsor
Join Date: Dec 2008
Location: Marietta, GA
Posts: 840
Drives: 2009 GT-R, 2010 370Z
Rep Power: 18 |
Key off and battery connected and u get all that?? Call me today later in the day and I can Try to help over the phone.
__________________
Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified |
03-05-2010, 10:51 PM | #805 (permalink) |
Base Member
Join Date: Sep 2009
Location: Arizona
Posts: 62
Drives: Chevy Trucks
Rep Power: 16 |
Soooo the car is all back together and it looks bad *** but it still does not start. But here are some pics I will post more of the inside tomorow.
New steering shaft 3/4in. chromoly Finished splitter 3/8 plastic on top and 1/8 alum. so it will last a little longer as it sits its about 3in. off the ground. Rear wing with out end plates. Single 3 in. alum. exhaust with a Burns race muffler. The whole thing from the Y back weighs 7.2 lbs. the Stillen system I took off weighs 54.5 lbs. |
03-05-2010, 11:08 PM | #806 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
a good news / bad news story at this point...
Junior (fathead) is right, the car looks ready and unbelievably well prepared down to a very detailed level. Some finishing touches on the interior as well I think all will appreciate. Wing looks terrific - went with an 8" instead of 10" lift given availability of part but I like it at this height, so won't be changing that. Splitter is the best I've seen, hoping it isn't too well hooked up and takes out frame when I inevitably make contact! Bad news is unfortunately after lots of experimentation, we were unable to get the car started. Sharif, if you are willing to this weekend, Junior would like to touch base with you. Believe he left you his number on your vmail. We are likely to find a friendly dealer in town this weekend and see if they are willing to hook up a Consult III and at least diagnose. Still getting same symptoms of: - KOEO - and headlights come on, radiator fans on - fuel pump not starting and fuel showing on panel as 'empty' / 'zero range' - also we found out by hooking up a known working OBD2 reader that there is no power / signal coming out of the OBD2 port... hoping this tells us somethign - we checked all fuses everywhere and while we replaced one small 10amp fuse in the kick panel, there were no other blown fuses and replacing the 10a didn't do anything (not sure which it was) - we checked all wiring, everything is connected solidly Possibly, we blew up some circuit while working on the car last few months... who knows at this point. I'm disappointed about this weekend, but tempered by the fact that the car is looking great across all other dimensions. T |
03-05-2010, 11:23 PM | #807 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
junior, by the way, when you get a chance, can you please post which 10a fuse it was... just count how many rows and columns over from top left and I'll look it up on the service manual... that might be a clue about what's going on... thanks
|
03-08-2010, 11:56 PM | #808 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188 |
Car is at a local dealer, right now we are thinking the problem is serious b/c the check engine light is on with key on... which according to my better informed colleagues means that all is good with wiring connections, fuses, etc, and the problem is deeper... e.g., something like a blown ECU! hoping that's not the case
more to come later this week sure would be nice to actually drive this car! |
03-12-2010, 02:13 PM | #810 (permalink) |
A True Z Fanatic
Join Date: Feb 2009
Location: Texas
Posts: 30,879
Drives: 370z
Rep Power: 4210 |
Great news to hear.
__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DannyGT's Journal/Progress | DannyGT | Member's 370Z Gallery | 174 | 10-17-2017 11:25 AM |
RCZ's 370Z Journal. | RCZ | Member's 370Z Gallery | 1743 | 08-10-2013 12:55 AM |
Edmonton Journal Review of the 370Z | BanningZ | Nissan 370Z General Discussions | 13 | 08-09-2009 06:44 PM |