TravisJB Journal

travisjb · 02-22-2010, 09:09 PM

you're prob right... more than happy to skip the fans!

kdoske · 02-22-2010, 10:34 PM

Quote:

Originally Posted by travisjb

you're prob right... more than happy to skip the fans!

just use these $25.00 inline 15amp thermostats. When 180F is reached it acts as an inline switch and turns it on the device(s). Can't exceed 15amps with the model posted.

Derale In-Line Fan Control Thermostat with -6 AN Fittings - 180 Degrees Derale Radiator Fans D13021

You could have three options.

1. connect the thermostat to your pumps and have them shut the pumps on and off when 180 degrees is reached and don't use any fans.

2. have the pumps running all the time and connect the thermostat only to the fans.

3. connect everything to the thermostat.

Personally I would go option 1.

__________________________________________________ _____________

As for the pumps I would go with Mocal Oil pumps. There are two main ones, one is rated at 300F and the other 350. When it comes to oil pumps the higher the temp rating the longer pump life you are gonna have.

300F oil Mocal Oil Pump:
http://www.racerpartswholesale.com/p...al_Cooler_Pump

- flow rate 1.0- 2.0 GPM and up to 54 PSI
- weight: 3.5 lbs
- 3/8" NPT fittings
- 8-amp current draw

350F oil Mocal Oil Pump: (probably over kill)
http://www.racerpartswholesale.com/p...al_Cooler_Pump

- 3 GPM @ 60+ psi
- 350f temp rating
- self-priming
- quiet low vibration operation
- 10,000 hour rated bearings & motor brushes
- hardened bronze pump (spur) gear rotors
- black anodized aluminum heatsink
- nickel plated pump head
- stainless pump head fasteners
- 3/8" NPT inlet/outlet
- high temperature internal wiring
- 3 foot wiring lead with (supplied) weatherproof connectors
- rubber-isolated mounting bracket and feet
- dimensions 6.2" x 4.1" x 4.0"

travisjb · 02-22-2010, 10:49 PM

great post! TY sir +1

leaning towards your option 1... will put more thought into the first pump... only need 1-2 gpm and you're right, not expecting more than 300F

kdoske · 02-22-2010, 11:00 PM

Thanks man

Also, something I forgot to mention, If the thermostat is connected to the pumps the fluid won't be flowing through the actually thermostat so you will want the thermostats as close to the diff housing as possible to make sure it is an accurate reading. As long as the thermostats is the right against the housing there should only be a -5 degree difference or less I would imagine.

travisjb · 02-23-2010, 08:45 PM

2 things...

1. I have the wiring harness and it looks like the right part... Thank you LOU FUSZ! will install later this week

2. Junior is thinking about offering a service where you ship him your crank sensor heat shield and he would upgrade it and send it back to you for a flate rate including shipping... we want to know if this would be worthwhile, so please go here Crank Position Sensor Heat Sheild Feeler??????? and provide feedback... he would have to be a forum sponsor to offer this for real, so we are trying to figure out if it's worth the money for him to become a sponsor... thanks

FuszNissan · 02-23-2010, 10:34 PM

Finally came in...lol

Quote:

Originally Posted by travisjb

2 things...

1. I have the wiring harness and it looks like the right part... Thank you LOU FUSZ! will install later this week

2. Junior is thinking about offering a service where you ship him your crank sensor heat shield and he would upgrade it and send it back to you for a flate rate including shipping... we want to know if this would be worthwhile, so please go here Crank Position Sensor Heat Sheild Feeler??????? and provide feedback... he would have to be a forum sponsor to offer this for real, so we are trying to figure out if it's worth the money for him to become a sponsor... thanks

travisjb · 02-25-2010, 01:09 AM

I agree, Greg... appreciate everyone's involvement in the build if I haven't mentioned that enough already! this is practically a forum community car (no you can't drive it!

)

travisjb · 02-26-2010, 12:20 AM

Hey all, I did shifter karts for the first time tonight! Go do this!!

Zless@arizona · 02-28-2010, 10:53 PM

#104,
I found the info that I PMd you: "And speaking of axles, the rear axle in the Titan is a smallish variant similar to a Dana 44, where the Tundra is available with a massive 101/2-inch ring gear similar to a Corporate 14-bolt."

Source:
2008 Nissan Titan Pro4X Vs 2008 Toyota Tundra TRD - Tundra 4x4 Double Cab - 4Wheel & Off-Road Magazine

travisjb · 02-28-2010, 11:30 PM

thank you sir!

Zless@arizona · 03-01-2010, 10:53 PM

Quote:

Originally Posted by travisjb

thank you sir!

"...the 10.5 comes standard with the 5.7L engine..." URL: 2007 Toyota Tundra - First Drive - Four Wheeler Magazine The only way to be certain is to give Toyota the numbers on the axle--the code will identify R/P diameter. All of this discussion of rears brings to mind a song...Freddie Mercury's "Fat Bottomed Girls..." I don't agree with his orientation, but I do appreciate the song...and it is so appropo to ring and pinion research...I can hear it playing in the Toyota Truck Proving Grounds trailer...

Fathead · 03-02-2010, 10:13 AM

Splitter update: Pics are kinda crappy but you get the point.

I have it held on with four of these stainless clamps, so taking it on and off is quick.

Welded bungs on the bumper support for the splitter rods.

ChrisSlicks · 03-02-2010, 11:09 AM

Wow that splitter looks like it would be great at mowing down pedestrians.

Is it made from SS?

Fathead · 03-02-2010, 11:15 AM

The piece you see is just the bottom its 1/8 alum. I have a peice of 3/8 plastic that goes on top. Its not done yet ...........

theDreamer · 03-02-2010, 08:13 PM

In for pictures of the new wing, and hopefully soon a good review.
Car is coming along great, cannot wait to hear about your first track day.

02-22-2010, 09:09 PM	#1 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	you're prob right... more than happy to skip the fans! __________________ 2009 370Z #104 For Sale

02-22-2010, 10:49 PM	#3 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	great post! TY sir +1 leaning towards your option 1... will put more thought into the first pump... only need 1-2 gpm and you're right, not expecting more than 300F __________________ 2009 370Z #104 For Sale

02-23-2010, 08:45 PM	#5 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	2 things... 1. I have the wiring harness and it looks like the right part... Thank you LOU FUSZ! will install later this week 2. Junior is thinking about offering a service where you ship him your crank sensor heat shield and he would upgrade it and send it back to you for a flate rate including shipping... we want to know if this would be worthwhile, so please go here Crank Position Sensor Heat Sheild Feeler??????? and provide feedback... he would have to be a forum sponsor to offer this for real, so we are trying to figure out if it's worth the money for him to become a sponsor... thanks __________________ 2009 370Z #104 For Sale Last edited by travisjb; 02-23-2010 at 08:55 PM.

02-25-2010, 01:09 AM	#7 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	I agree, Greg... appreciate everyone's involvement in the build if I haven't mentioned that enough already! this is practically a forum community car (no you can't drive it! ) __________________ 2009 370Z #104 For Sale

02-26-2010, 12:20 AM	#8 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	Hey all, I did shifter karts for the first time tonight! Go do this!! __________________ 2009 370Z #104 For Sale

02-22-2010, 11:00 PM	#4 (permalink)
kdoske Track Member Join Date: Jul 2009 Location: Louisiana Posts: 541 Drives: 800whp Unicorn FI Z Rep Power: 17	Thanks man Also, something I forgot to mention, If the thermostat is connected to the pumps the fluid won't be flowing through the actually thermostat so you will want the thermostats as close to the diff housing as possible to make sure it is an accurate reading. As long as the thermostats is the right against the housing there should only be a -5 degree difference or less I would imagine.

02-28-2010, 10:53 PM	#9 (permalink)
Zless@arizona Base Member Join Date: Sep 2009 Location: Tallahassee Florida Posts: 71 Drives: '01 Chvrlt Tahoe 4x3 Rep Power: 16	Gotta Love Those Big Rears! #104, I found the info that I PMd you: "And speaking of axles, the rear axle in the Titan is a smallish variant similar to a Dana 44, where the Tundra is available with a massive 101/2-inch ring gear similar to a Corporate 14-bolt." Source: 2008 Nissan Titan Pro4X Vs 2008 Toyota Tundra TRD - Tundra 4x4 Double Cab - 4Wheel & Off-Road Magazine __________________ The only U.S.A.-available Mobil1 oil that is BMW LL01 is 0W-40...most of M1's engine oil is hydrocracked/GIII junk.

02-28-2010, 11:30 PM	#10 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	thank you sir! __________________ 2009 370Z #104 For Sale

03-02-2010, 10:13 AM	#12 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	Splitter update: Pics are kinda crappy but you get the point. I have it held on with four of these stainless clamps, so taking it on and off is quick. Welded bungs on the bumper support for the splitter rods.

03-02-2010, 11:09 AM	#13 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 654	Wow that splitter looks like it would be great at mowing down pedestrians. Is it made from SS?

03-02-2010, 11:15 AM	#14 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	The piece you see is just the bottom its 1/8 alum. I have a peice of 3/8 plastic that goes on top. Its not done yet ...........

03-02-2010, 08:13 PM	#15 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	In for pictures of the new wing, and hopefully soon a good review. Car is coming along great, cannot wait to hear about your first track day. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM