TravisJB Journal

import111 · 10-03-2009, 01:02 PM

In F1 they use a water based paint type of fluid to see how air flows over different parts of the car. Might be worth a try.

Zless@arizona · 10-03-2009, 03:05 PM

Quote:

Originally Posted by Zless@arizona

I'm thinking the only way you can measure the effectiveness/need of the rear brake cooling devices is to attach to the caliper an electric pyrometer used for diesel EGT that saves the peak reading. The readings would need to be taken after a full race as the heat buildup is cumulative (one lap is not enough). Lemme see if I can find any EGT setup that would work in this application...

As I keyed the above

I was thinking, "EGT is not going to work here." Then I found this:

High Temperature Infrared Temperature Sensor

These temperature sensors cover ranges up to 1200 Deg.C. The housing is manufactured from aluminium and is supplied in anodised red. This sensor is especially suitable for brake temperature measurement.

£295.00 + Carriage and VAT

Ring +44(0)1451 822458 or 07774 149266 for further details or e-mail Ben Morris

Download .PDF file for full specification
Principle Specification
Maximum calibrated object temperature

Minimum calibrated object temperature

Measurement Distance

Object temperature accuracy

Maximum ambient temperature

Supply Voltage

Field of view

Spot Size

Output
1200 Deg C

Ambient Temperature (Max. 120 Deg.C)

30 - 70 mm

+/- 1%

120 Deg C

5 - 16 Volts DC

14 Deg.

20 mm diameter at 50 mm distance

Non Linear

Here's the url:
Brake Disc Temperature Sensor

Greg

travisjb · 10-03-2009, 03:34 PM

that sensor could be used to log directly on my traqmate I believe... will put some thought into it

good discussion all... these ducts have their trade-offs, but overall i think they will add to the reliability of the car which matters plenty to me... not too mention they will look good!... maybe not the most practical selection I've made, but we're moving forward with them

I like the idea of getting some measurement on the aero impacts... back in the day, had a wind tunnel at my engineering U... now, we're going to have to improvise... the fluid idea is a good one... I also know a few aerodynamicsts that I may check in with

Fathead · 10-03-2009, 07:36 PM

Honestly at the level of racing that we are at I dont think they will have a noticable effect at all. You guys are talking F1 stuff and we are more of a DE type of level. I am not going to post any more pics of the car and cage but here is one scoop almost finished. I think they look bitchen! Super car style.

travisjb · 10-03-2009, 10:24 PM

wtf ! ? we're not getting picked up for koni challenge ?

Zless@arizona · 10-03-2009, 10:43 PM

Quote:

Originally Posted by travisjb

wtf ! ? we're not getting picked up for koni challenge ?

If you go there, I'll have to put on my GM Proving Grounds shirt with "Greg" name tag stitched on. It is in mothballs now, and it is still smoking. Last worn during fuel tank testing...no, I did not wear Nomex! Sometimes, I can't believe I'm still here! [insert flame smilie here]

Zless@arizona · 10-03-2009, 10:57 PM

Quote:

Originally Posted by Fathead

"...at this level of racing I dont think they will have a noticable effect. Here is one scoop almost finished. I think they look bitchen!

Raison d'etre: "...they look bitchen!" My point exactly. Even if they don't work, Travisjb, Fathead's scoops will be the only ones at the track!
Can you spell "Psychological Advantage!"

Just pass one newbie on the outside in a 45* drift, pedal-to-the-metal, both rears throwing smoke and rubber chunks, front-end crossed up like a motorcrosser...and as you gain traction they will see the SCOOPS!...they will think you are a Z God!

travisjb · 10-03-2009, 11:05 PM

Quote:

Originally Posted by Zless@arizona

If you go there, I'll have to put on...

we can dream ! one of us would need to hit the lottery first !

Quote:

Originally Posted by Zless@arizona

...Can you spell "Psychological Advantage!"...

if we want a real psychological advantage, will need one of these !!!

Zless@arizona · 10-03-2009, 11:13 PM

Quote:

Originally Posted by travisjb

we can dream ! one of us would need to hit the lottery first ! if we want a real psychological advantage, will need one of these !!!

LOL!!

Is that Radial Machine Gun mounted on a Bugatti Veyron? NICE!

MightyBobo · 10-04-2009, 12:42 AM

Quote:

Originally Posted by Zless@arizona

LOL!!

Is that Radial Machine Gun mounted on a Bugatti Veyron? NICE!

http://upload.wikimedia.org/wikipedi...jaguar_xkr.jpg

Jaguar XKR from "Die Another Day"

Fathead · 10-04-2009, 12:56 PM

Quote:

Originally Posted by travisjb

wtf ! ? we're not getting picked up for koni challenge ?

You would have to buy Koni suspension first.

Luv'n my Z · 10-04-2009, 02:20 PM

Travis I just subscribed and am wondering if you are going to put a big $&@ gt wing on your car

Luv'n my Z · 10-04-2009, 02:24 PM

Quote:

Originally Posted by Zless@arizona

http://www.chicagotribune.com/media/photo/2008-11/43247941.jpg

Holy crap.
I think I just shat my pants

travisjb · 10-04-2009, 04:20 PM

Quote:

Originally Posted by Luv'n my Z

Travis I just subscribed and am wondering if you are going to put a big $&@ gt wing on your car

hey, thx for your note.

yes, I will be pursuing more rear downforce. combo of rear wing and rear diffuser. if you look back a page or two, you'll see a kognition rear wing I am considering. as for rear diffuser, that is also a possiblity, but I'll probably wait for the market to produce one vs making a custom. one like the top secret model for 350s that is said to have a real aero impact.

The course I typically run has a nascar oval that I want to be able to run flat out. Speeds now are about 120mph... when I'm done, should be up around 135mph. And I want to be able to do so well within the margins of the car, so I don't end up eating concrete!

We're also looking at options for a front splitter. That WILL be custom and made of some relatively inexpensive material such as di-bond or hdpe.

Luv'n my Z · 10-04-2009, 04:34 PM

What about the sunline Z body kit

10-03-2009, 03:34 PM	#408 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	that sensor could be used to log directly on my traqmate I believe... will put some thought into it good discussion all... these ducts have their trade-offs, but overall i think they will add to the reliability of the car which matters plenty to me... not too mention they will look good!... maybe not the most practical selection I've made, but we're moving forward with them I like the idea of getting some measurement on the aero impacts... back in the day, had a wind tunnel at my engineering U... now, we're going to have to improvise... the fluid idea is a good one... I also know a few aerodynamicsts that I may check in with __________________ 2009 370Z #104 For Sale Last edited by travisjb; 10-03-2009 at 03:37 PM.

10-03-2009, 10:24 PM	#410 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	wtf ! ? we're not getting picked up for koni challenge ? __________________ 2009 370Z #104 For Sale

10-04-2009, 02:20 PM	#417 (permalink)
Luv'n my Z Base Member Join Date: Aug 2009 Location: Rancho Santa fe Posts: 190 Drives: Your mom Rep Power: 16	Travis I just subscribed and am wondering if you are going to put a big $&@ gt wing on your car __________________ ~Luv'n my Z_________________________________________ 75 degrees farenhieght new years day not a cloud in the sky only in southern Cali

10-04-2009, 04:34 PM	#420 (permalink)
Luv'n my Z Base Member Join Date: Aug 2009 Location: Rancho Santa fe Posts: 190 Drives: Your mom Rep Power: 16	What about the sunline Z body kit __________________ ~Luv'n my Z_________________________________________ 75 degrees farenhieght new years day not a cloud in the sky only in southern Cali Last edited by Luv'n my Z; 10-04-2009 at 04:59 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 10:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM

10-03-2009, 01:02 PM	#406 (permalink)
import111 Track Member Join Date: Feb 2009 Location: Tucson, AZ. Posts: 622 Drives: 09 Nissan 370Z Rep Power: 192	In F1 they use a water based paint type of fluid to see how air flows over different parts of the car. Might be worth a try.