TravisJB Journal

Josh@STILLEN · 09-20-2009, 08:51 PM

What a difference a couple of months makes when you pull the trigger to go big! Nice!!

Fathead · 09-20-2009, 10:01 PM

Got one side out.

travisjb · 09-20-2009, 10:39 PM

Original weight was 3,301 with driver and fuel... will be interesting to see where we come out after this phase of the build... Cage will add, but we should drop 40 ish by going down to one racing seat from 2 stock seats... then perhaps another 50-100 as Junior works his magic... then maybe another 30-50 when we pull all the hvac... I'd love to get it down below 3,100 competition weight... my time trial class allows me to get down to 8.7 pounds per horsepower so at 3,100 I could target ~350 WHP on a Dyno Jet

Zless@arizona · 09-20-2009, 10:49 PM

"...removing seam-sealer..." Attention to detail! Be careful, Travis...with ATD like that, you are likely to be # 104! ;-)

Fathead · 09-20-2009, 11:09 PM

I think we can make a lexan rear glass, it's really flat, that should save some weight

travisjb · 09-20-2009, 11:11 PM

Car's in good hands... lots of detailed work to be done

Back on numbers... I'm leaning towards 104... low enough that it will probably always be a target, which is a good thing... hopefully it doesn't come across overly brash... will take a few more days to think about it, then decide

travisjb · 09-20-2009, 11:13 PM

Quote:

Originally Posted by Fathead

I think we can make a lexan rear glass, it's really flat, that should save some weight

Good point, forgot about that... not sure how much it'll save, maybe 20#s?... should lower CG too

Fathead · 09-21-2009, 08:57 PM

All the sound deadening and all the seam sealer are out, all the unneeded brackets are out fab work starts soon.

travisjb · 09-21-2009, 09:13 PM

man you're fast! must have been knuckle-busting work grinding out that seam sealer... nice job

Seat show up ???

Fathead · 09-21-2009, 09:49 PM

No seat, got the Bride base its nice, looks like it will sit the seat down low I will have pics up when it all shows up.

travisjb · 09-21-2009, 09:52 PM

Ok. They projected today for seat arrival... hopefully tomorrow... good to hear about the base...

Mike B, thanks again for world-class support !

M.Bonanni · 09-22-2009, 12:32 PM

Quote:

Originally Posted by travisjb

Ok. They projected today for seat arrival... hopefully tomorrow... good to hear about the base...

Mike B, thanks again for world-class support !

Anytime!

travisjb · 09-22-2009, 09:57 PM

I stopped by Junior's today and everything is on track... not going to spill the beans on what all we're doing, but I can say the car will be purpose built yet still very unique... and we're getting at LOTS of weight

I'm going to update my part out thread tonight... seats are out and a few other things that I think someone is going to need TravisJB 370Z Race Car Part Out! Interior, Seats, Wheels and Tires, etc

Robert, if you're reading this... car should be coming your way in a couple weeks... I may swing by and pick up the spa gauge this week too - might as well install that while we've got the dash apart... I'll give you a call

Zless@arizona · 09-23-2009, 01:34 AM

Quote:

Originally Posted by travisjb

Back on numbers. I'm leaning toward 104. Low enough that it will probably always be a target, which is a good thing. Hopefully it doesn't come across overly brash. I will take a few more days to think about it, then I'll decide

This will be my last comment on the "104." It will not cause other race drivers to look at you as being "overly brash." As a rule, they will not know what is the significance. Only you, and your supporters here at 370Z, will know the meaning of "104" ! Test it...ask a fellow racer at your next event, "Sir, if I paint my car with "104," what would you think?" He'll probably reply, " '104',...that's a fever...you better see a Doctor." Or he might say, " '104'...you'll need triple that horsepower to be competitive here!" LOL! ;-)

Zless@arizona · 09-23-2009, 01:50 AM

Travisjb: You mentioned in a previous post that a gray interior paint looks good. I'd recommend, as a counter-point, flat black. Your build suggests that you are very serious. Any distraction will be detrimental. Gray will reflect more light than black. Flat black absorbs the most light, thus allowing you the most concentration for the task at hand, which is scoring a lap of 1:04 !

09-20-2009, 10:39 PM	#348 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Original weight was 3,301 with driver and fuel... will be interesting to see where we come out after this phase of the build... Cage will add, but we should drop 40 ish by going down to one racing seat from 2 stock seats... then perhaps another 50-100 as Junior works his magic... then maybe another 30-50 when we pull all the hvac... I'd love to get it down below 3,100 competition weight... my time trial class allows me to get down to 8.7 pounds per horsepower so at 3,100 I could target ~350 WHP on a Dyno Jet __________________ 2009 370Z #104 For Sale

09-20-2009, 10:49 PM	#349 (permalink)
Zless@arizona Base Member Join Date: Sep 2009 Location: Tallahassee Florida Posts: 71 Drives: '01 Chvrlt Tahoe 4x3 Rep Power: 16	Seam-sealer!? Hmmmm... "...removing seam-sealer..." Attention to detail! Be careful, Travis...with ATD like that, you are likely to be # 104! ;-)

09-20-2009, 11:11 PM	#351 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Car's in good hands... lots of detailed work to be done Back on numbers... I'm leaning towards 104... low enough that it will probably always be a target, which is a good thing... hopefully it doesn't come across overly brash... will take a few more days to think about it, then decide __________________ 2009 370Z #104 For Sale

09-21-2009, 09:13 PM	#354 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	man you're fast! must have been knuckle-busting work grinding out that seam sealer... nice job Seat show up ??? __________________ 2009 370Z #104 For Sale

09-21-2009, 09:52 PM	#356 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Ok. They projected today for seat arrival... hopefully tomorrow... good to hear about the base... Mike B, thanks again for world-class support ! __________________ 2009 370Z #104 For Sale

09-20-2009, 08:51 PM	#346 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	What a difference a couple of months makes when you pull the trigger to go big! Nice!!

09-20-2009, 10:01 PM	#347 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	Got one side out.

09-20-2009, 11:09 PM	#350 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	I think we can make a lexan rear glass, it's really flat, that should save some weight

09-21-2009, 08:57 PM	#353 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	All the sound deadening and all the seam sealer are out, all the unneeded brackets are out fab work starts soon.

09-21-2009, 09:49 PM	#355 (permalink)
Fathead Base Member Join Date: Sep 2009 Location: Arizona Posts: 62 Drives: Chevy Trucks Rep Power: 16	No seat, got the Bride base its nice, looks like it will sit the seat down low I will have pics up when it all shows up.

09-22-2009, 09:57 PM	#358 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	I stopped by Junior's today and everything is on track... not going to spill the beans on what all we're doing, but I can say the car will be purpose built yet still very unique... and we're getting at LOTS of weight I'm going to update my part out thread tonight... seats are out and a few other things that I think someone is going to need TravisJB 370Z Race Car Part Out! Interior, Seats, Wheels and Tires, etc Robert, if you're reading this... car should be coming your way in a couple weeks... I may swing by and pick up the spa gauge this week too - might as well install that while we've got the dash apart... I'll give you a call __________________ 2009 370Z #104 For Sale

09-23-2009, 01:50 AM	#360 (permalink)
Zless@arizona Base Member Join Date: Sep 2009 Location: Tallahassee Florida Posts: 71 Drives: '01 Chvrlt Tahoe 4x3 Rep Power: 16	interior: paint: gray... Travisjb: You mentioned in a previous post that a gray interior paint looks good. I'd recommend, as a counter-point, flat black. Your build suggests that you are very serious. Any distraction will be detrimental. Gray will reflect more light than black. Flat black absorbs the most light, thus allowing you the most concentration for the task at hand, which is scoring a lap of 1:04 ! Last edited by Zless@arizona; 09-23-2009 at 01:52 AM. Reason: "scoring a lap of 1:04!"...not really a comment ;-)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 11:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 06:44 PM