TravisJB Journal

Mike

Regarding the stillen bumper. Mine was blended by the body shop. 4 hours labor, but it stood up to hitting a deer on the side and massive deformation of the bumper from getting stuck on my trailer after the last alignment, which lowered it just enough to get caught up. The rest of it is actually deformed now, but the seams held up just fine.

I should have a new one delivered to me today to replace it. On this one, I'm not blending.

Also Travis,
In addition to scraping the bolt heads off of my undertray, I also wore the back underside lip off of the stillen bumper so that the front of the tray wasn't attached to anything after a while. Got black flagged at VIR because my aluminum undertray was scraping and sparking every time I hit a braking zone, so you may want to check the trailing edge of your bumper.

I think I'm going to wind up raising the car another 1/2 inch.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968