TravisJB Journal

travisjb · 01-20-2011, 12:28 PM

Quote:

Originally Posted by RCZ

Great! Looks like it came out well with the splitter too! You should hook those brake ducts to some velocity stacks and get a shroud around the oil cooler to concentrate as much air through it as possible.

as it turns out, working on the shroud now... hoping it provides another 10-20F of cooling...

Quote:

Originally Posted by Endgame

I am loving pics 755905 and 755906. Wish I could get them w/o the watermarks....

Quote:

Originally Posted by k20z3

The last shot is MEAN!

thanks guys!

Josh, how about spending some stillen money to buy shots showing off fascia? then we can use on blog post... might make sense to split the $69 for full day session

RCZ · 01-20-2011, 06:29 PM

pics of the shroud when done please

Mike · 01-20-2011, 08:14 PM

pics seem to have been removed

wretched_z · 01-20-2011, 09:21 PM

Quote:

pics seem to have been removed

Im getting the same message when I try to open the links.

travisjb · 01-21-2011, 02:48 PM

they're back on line now

zzdudaka · 01-21-2011, 03:21 PM

The link seems valid, but I don't seem to be getting the picture I think I should. Very anxious to see the diffuser.

travisjb · 01-23-2011, 01:40 AM

I'll post the track pics directly here this week... shroud will be another week or two

Had mixed success at track today... Firebird east... last time i was there was shortly after I bought the car and was still on street tires... ran a 1:06.5... today I was running about that time maybe half second less... a bit frustrating and a sign of the problems I am having with my brakes... had three offs today that were a result of setup issues and me trying to pass cars on 'dirty lines' - or braking zones with debris / silt... if you haven't tried tracking this car with ABS off, you should! ABS masks a lot of problems with the car, or at least my setup... we ended up running a softer front suspension with a few clicks out of the front suspension and -2 PSI on front vs rear in an attempt to get the front end to bite better under braking. The setup changes got me 50% of the way "there", but I'm not dialed in yet...

Ironically I dropped the rear when I had ABS to keep the ABS from going into ice mode, but finding that the drop is too much now - given ABS is off - because it doesn't transfer enough weight to front... ABS off, keep rear high, ABS on, drop rear down low as possible

The pads I'm running are mintex F3R front and mintex xtreme rear... I've decided that the F3Rs may be too much brake for me as a driver, and perhaps for this car... the coeff of friction is just too high and it comes on strong too fast to be practical for me on a short track with lots of stop and go (and ABS off)... not to mention the track I was running today has lots of brake zone transitions/ bumps... If i had ABS today, would have prob worked out okay, but without I was locking up when the front wheels hopped over transitions and missing turns

Other things I may try before I ditch these pads... go from 18K front / 16K rear springs to 16/16... increase rear pads from mintex xtreme to ferodo ds3000's... increase rear ride height 1/4" to 1/2"... restore ABS

I should also mention that one of my front rotors is warped due to excessive heat (before I added brake cooling). It is possible that some of my brake lock up is coming on due to the warped rotor.

Will begin work on the shroud this WED and will prob take a week after that... now that we're down to 1 oil cooler core, temps are getting back to 255F in Arizona winter ambient temps... so the shroud is going to be very necessary

Will add a couple points to the weight reduction thread

ChrisSlicks · 01-23-2011, 09:09 AM

Sorry to hear that Travis, sounds like that track is pretty tough without ABS. I was planning on switching to the F3R, now I have second thoughts. I was also wondering if a full floating rotor would be more resistant to warping, more room for even heat expansion right? At least one of my fronts is badly warped as well, I need to get some cooling.

travisjb · 01-23-2011, 10:19 AM

Quote:

Originally Posted by ChrisSlicks

Sorry to hear that Travis, sounds like that track is pretty tough without ABS. I was planning on switching to the F3R, now I have second thoughts. I was also wondering if a full floating rotor would be more resistant to warping, more room for even heat expansion right? At least one of my fronts is badly warped as well, I need to get some cooling.

IMO the way to solve the brake problem is to add cooling and keep things as simple as possible... I'm good on brake cooling now, so I would be surprised if I end up warping another set of rotors...

In addition to replacing warped front rotors, there are three things getting in the way of me effectively braking this car with ABS off...

1) IMO F3R's are not a "pedal feel" kind of pad, they'd prob be good for a driver with ABS that is constantly going into ABS anyways... and they'd prob be good for a driver that is used to a pad like this and running tracks with lots of long, straight, smooth braking zones... I look forward to trying them out in different conditions and providing more input later... I did run them at Chuckwalla last week and I turned the quickest time I have ever run there - although that track is all about high speed transitions and smooth surface / relatively straight braking zones

2) ride height, tire psi, and suspension setup... with ABS off I'm finally beginning to realize how important this element is in braking... dropping 2psi front (relative to rear) and playing around with damper settings made a HUGE difference... I think for guys with a lot of seat time and test/tune time this will come as no surprise... for me, I was amazed how a few clicks on the dampers etc changed braking performance - particular the braking in response to a brake zone bump and the initial bite when first applying brakes...

3) rear compound that is a match for these F3Rs on the front... during hard braking, my front tires were losing traction first, so once I address #2 above, I'm going to also switch to a stiffer rear compound (the ferodos) to see if I can balance out the F3Rs a bit

Hope this helps... I'm sure there are applications where the F3Rs make a lot of sense - and if there's anyone else reading this that has experience with these pads, would welcome more input

Josh@STILLEN · 01-23-2011, 02:07 PM

I'll let AP Chris step in with his insights, but Travis I think you're coming into your own as a driver, and getting in the thick of things, which is fantastic to see.

Another point is you're to the level where not every pad, suspension, tire pressure setup is the same for each track. You will have better results on certain tracks with certain setups, which will include brake pad selection. Good part is there is a myriad of options, but at your level in ability and build, doubt there is going to be a 'magic' setup that will perform as what you want on each track, as you're noting they can vary significantly on your expectations of the car.

Knowing what each change does to the feel of the car, and how you drive will have a lasting impact on how to set the car up for each type of track.

Great info, and thanks for the continual updates..

travisjb · 01-25-2011, 10:26 PM

Quote:

Originally Posted by Josh@STILLEN

I'll let AP Chris step in with his insights, but Travis I think you're coming into your own as a driver, and getting in the thick of things, which is fantastic to see.

Another point is you're to the level where not every pad, suspension, tire pressure setup is the same for each track. You will have better results on certain tracks with certain setups, which will include brake pad selection. Good part is there is a myriad of options, but at your level in ability and build, doubt there is going to be a 'magic' setup that will perform as what you want on each track, as you're noting they can vary significantly on your expectations of the car.

Knowing what each change does to the feel of the car, and how you drive will have a lasting impact on how to set the car up for each type of track.

Great info, and thanks for the continual updates..

Thanks. I think you are right about the need for different setups at different tracks under different conditions... unfortunately I'm lacking the seat time and tuning experience to sort through all that right now! So everyone gets to see the whole ugly learning process along with me here on the forum... haha

Would be appreciative if Chris dropped by here to share some sage advice

travisjb · 01-25-2011, 10:31 PM

Finally got the high res images from my recent visit to Chuckwalla... thanks CaliPhoto... let me know what you think

370zForever · 01-25-2011, 10:43 PM

That diffuser is sick!! I want one...Great job with the diffuser and the Stillen fascia...

Red__Zed · 01-27-2011, 11:36 AM

sick pics man!

definitionxmk · 01-27-2011, 01:30 PM

Oh man! So Sick!

01-20-2011, 08:14 PM	#1218 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	pics seem to have been removed __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

01-21-2011, 02:48 PM	#1220 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	they're back on line now __________________ 2009 370Z #104 For Sale

01-21-2011, 03:21 PM	#1221 (permalink)
zzdudaka Base Member Join Date: Oct 2010 Location: South Carolina Age: 48 Posts: 130 Drives: 40th AnniverZary 370 Rep Power: 15	The link seems valid, but I don't seem to be getting the picture I think I should. Very anxious to see the diffuser. __________________ Happy Z Motoring! zzdudaka 2010 40th Anniversary 370Z #357

01-23-2011, 01:40 AM	#1222 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	I'll post the track pics directly here this week... shroud will be another week or two Had mixed success at track today... Firebird east... last time i was there was shortly after I bought the car and was still on street tires... ran a 1:06.5... today I was running about that time maybe half second less... a bit frustrating and a sign of the problems I am having with my brakes... had three offs today that were a result of setup issues and me trying to pass cars on 'dirty lines' - or braking zones with debris / silt... if you haven't tried tracking this car with ABS off, you should! ABS masks a lot of problems with the car, or at least my setup... we ended up running a softer front suspension with a few clicks out of the front suspension and -2 PSI on front vs rear in an attempt to get the front end to bite better under braking. The setup changes got me 50% of the way "there", but I'm not dialed in yet... Ironically I dropped the rear when I had ABS to keep the ABS from going into ice mode, but finding that the drop is too much now - given ABS is off - because it doesn't transfer enough weight to front... ABS off, keep rear high, ABS on, drop rear down low as possible The pads I'm running are mintex F3R front and mintex xtreme rear... I've decided that the F3Rs may be too much brake for me as a driver, and perhaps for this car... the coeff of friction is just too high and it comes on strong too fast to be practical for me on a short track with lots of stop and go (and ABS off)... not to mention the track I was running today has lots of brake zone transitions/ bumps... If i had ABS today, would have prob worked out okay, but without I was locking up when the front wheels hopped over transitions and missing turns Other things I may try before I ditch these pads... go from 18K front / 16K rear springs to 16/16... increase rear pads from mintex xtreme to ferodo ds3000's... increase rear ride height 1/4" to 1/2"... restore ABS I should also mention that one of my front rotors is warped due to excessive heat (before I added brake cooling). It is possible that some of my brake lock up is coming on due to the warped rotor. Will begin work on the shroud this WED and will prob take a week after that... now that we're down to 1 oil cooler core, temps are getting back to 255F in Arizona winter ambient temps... so the shroud is going to be very necessary Will add a couple points to the weight reduction thread __________________ 2009 370Z #104 For Sale Last edited by travisjb; 01-23-2011 at 01:45 AM.

01-23-2011, 09:09 AM	#1223 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Sorry to hear that Travis, sounds like that track is pretty tough without ABS. I was planning on switching to the F3R, now I have second thoughts. I was also wondering if a full floating rotor would be more resistant to warping, more room for even heat expansion right? At least one of my fronts is badly warped as well, I need to get some cooling. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

01-20-2011, 06:29 PM	#1217 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	pics of the shroud when done please

01-23-2011, 02:07 PM	#1225 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	I'll let AP Chris step in with his insights, but Travis I think you're coming into your own as a driver, and getting in the thick of things, which is fantastic to see. Another point is you're to the level where not every pad, suspension, tire pressure setup is the same for each track. You will have better results on certain tracks with certain setups, which will include brake pad selection. Good part is there is a myriad of options, but at your level in ability and build, doubt there is going to be a 'magic' setup that will perform as what you want on each track, as you're noting they can vary significantly on your expectations of the car. Knowing what each change does to the feel of the car, and how you drive will have a lasting impact on how to set the car up for each type of track. Great info, and thanks for the continual updates..

01-25-2011, 10:31 PM	#1227 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Finally got the high res images from my recent visit to Chuckwalla... thanks CaliPhoto... let me know what you think Fulljim and carlitos_370z like this. __________________ 2009 370Z #104 For Sale

01-25-2011, 10:43 PM	#1228 (permalink)
370zForever Base Member Join Date: Jul 2009 Location: California Posts: 159 Drives: 09 Black 370z Rep Power: 16	That diffuser is sick!! I want one...Great job with the diffuser and the Stillen fascia...

01-27-2011, 11:36 AM	#1229 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	sick pics man!

01-27-2011, 01:30 PM	#1230 (permalink)
definitionxmk Track Member Join Date: Jul 2009 Location: Los Angeles CA Posts: 973 Drives: Stage 2 SC 370Z Rep Power: 17	Oh man! So Sick! carlitos_370z likes this. __________________ *FALKEN . AMUSE . STANCE . INVIDIA . MINES . TOMMY KAIRA . BRIDE . VOLK RACING . GTM* Featured in DSPORT issue #137 - Follow me on Instagram: @definitionxmk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DannyGT's Journal/Progress	DannyGT	Member's 370Z Gallery	174	10-17-2017 11:25 AM
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-10-2013 12:55 AM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 06:44 PM