DannyGT's Journal/Progress

DannyGT · 05-15-2009, 05:48 AM

Yup it's a combination of things...

1. Overall diameter on the fronts ended up being ~12mm taller
2. More camber in the rear
3. Felt as if the suspension settled a bit lower when all said and done

I will be getting corner balanced on Tuesday so everything should be evened out. I'll take more pics including exact weight at each corner. Full camber settings, and the overall exact weight of the car. I'll scan the sheet and post it here.

370z · 05-15-2009, 11:34 AM

already moddin !

yousa crazy mofo....

M.Bonanni · 05-15-2009, 12:14 PM

Car looks awesome! Loving those AMEs.

Unicorn_blood · 05-16-2009, 02:41 PM

Super clean... I'm trying to decide which is better setup (considering all the mods) for the same amount of money. This or the Nismo!?!

DannyGT · 05-17-2009, 07:50 PM

Some additional shots!

This is after the custom X pipe and tips installed on the Stillen exhaust...I eliminated any sort of rubbing/hitting isues once and for all! I havent felt an ounce of difference on my butt dyno! I'll be hitting the dyno this coming weekend so we'll see...

I like it - ESPECIALLY - form the side profile...
The problem with the round with no angle is the side profile. I never minded the rear shots of the Stillen tips but the from the side they looked way to big + all the adjustments that were made just to get it to look even and flush all led to this!

miguez · 05-18-2009, 03:54 AM

Look great Danny! Where did the tips come from?

I wonder if anyone will get tips that are oval instead of round as seen from the back, to fill in the bumper cutout more. Perhaps they already exist?

DannyGT · 05-18-2009, 06:56 AM

That was my original plan 4.5" oval slant cut burnt tips. But I would have had to wait a week to get them and with oil cooler and intakes being installed this is what was available so I decided to do it. I like it! The back is a more subtle look and then anything from quarter/side angle just looks amazing.

These are 4.25 magnaflow tips.

semtex · 05-18-2009, 07:57 AM

The tips look awesome, dude!

RCZ · 05-18-2009, 11:40 AM

fantastic.

dat370zguy · 05-19-2009, 02:22 AM

Wow man looking good, one question though is the front higher than the rear? It kinda seems like it in the picks.

NA&CH · 05-19-2009, 08:50 AM

Damn Danny,

Car looks sick. Perfect stance and the rims are awesome. Very Nice.

Chris

DannyGT · 05-19-2009, 08:52 AM

Quote:

Originally Posted by dat370zguy

Wow man looking good, one question though is the front higher than the rear? It kinda seems like it in the picks.

not really it's just the front has a slightly thicker profile. Also the car hasn't been corner balanced yet and I wanted them to work with the setup I have now. They'll make sure everything is even!

par4bmw · 05-19-2009, 11:09 AM

Looks awesome. Finally some slanted tips.

Best looking Z so far IMHO.

Unicorn_blood · 05-20-2009, 12:38 PM

DannyGT: I was wondering what front and rear arms are you going for? SPL all the way?

DannyGT · 05-20-2009, 07:11 PM

When I do it, yes it'll probably be SPL all around unless companies like cusco/whiteline start coming out with stuff...

Shouldnt have an issue with SPL tho.

05-15-2009, 05:48 AM	#46 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	Yup it's a combination of things... 1. Overall diameter on the fronts ended up being ~12mm taller 2. More camber in the rear 3. Felt as if the suspension settled a bit lower when all said and done I will be getting corner balanced on Tuesday so everything should be evened out. I'll take more pics including exact weight at each corner. Full camber settings, and the overall exact weight of the car. I'll scan the sheet and post it here. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

05-15-2009, 11:34 AM	#47 (permalink)
370z Enthusiast Member Join Date: Dec 2008 Location: South West Posts: 258 Drives: 96 240sx(sold in 07) Rep Power: 491	already moddin ! yousa crazy mofo.... __________________ http://www.leavingfearbehind.com/ http://www.tchrd.org/category/video/ http://www.channel4.com/video/dispat...bet/index.html

05-15-2009, 12:14 PM	#48 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Car looks awesome! Loving those AMEs. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

05-17-2009, 07:50 PM	#50 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	Some additional shots! This is after the custom X pipe and tips installed on the Stillen exhaust...I eliminated any sort of rubbing/hitting isues once and for all! I havent felt an ounce of difference on my butt dyno! I'll be hitting the dyno this coming weekend so we'll see... I like it - ESPECIALLY - form the side profile... The problem with the round with no angle is the side profile. I never minded the rear shots of the Stillen tips but the from the side they looked way to big + all the adjustments that were made just to get it to look even and flush all led to this! __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold) Last edited by DannyGT; 05-17-2009 at 07:52 PM.

05-18-2009, 06:56 AM	#52 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	That was my original plan 4.5" oval slant cut burnt tips. But I would have had to wait a week to get them and with oil cooler and intakes being installed this is what was available so I decided to do it. I like it! The back is a more subtle look and then anything from quarter/side angle just looks amazing. These are 4.25 magnaflow tips. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

05-16-2009, 02:41 PM	#49 (permalink)
Unicorn_blood Base Member Join Date: May 2009 Location: Milky Way Posts: 40 Drives: Enzo Rep Power: 16	Super clean... I'm trying to decide which is better setup (considering all the mods) for the same amount of money. This or the Nismo!?!

05-18-2009, 03:54 AM	#51 (permalink)
miguez Enthusiast Member Join Date: Apr 2009 Location: Columbus, Ohio Posts: 359 Drives: '04 Cavalier Rep Power: 181	Look great Danny! Where did the tips come from? I wonder if anyone will get tips that are oval instead of round as seen from the back, to fill in the bumper cutout more. Perhaps they already exist?

05-18-2009, 07:57 AM	#53 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	The tips look awesome, dude! __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

05-18-2009, 11:40 AM	#54 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	fantastic.

05-19-2009, 02:22 AM	#55 (permalink)
dat370zguy Base Member Join Date: May 2009 Location: around Posts: 19 Drives: no more 350 >.< Rep Power: 16	Wow man looking good, one question though is the front higher than the rear? It kinda seems like it in the picks.

05-19-2009, 08:50 AM	#56 (permalink)
NA&CH Enthusiast Member Join Date: Dec 2008 Location: Nipples Florida Posts: 298 Drives: Looking for PW 370 Rep Power: 290	Damn Danny, Car looks sick. Perfect stance and the rims are awesome. Very Nice. Chris

05-19-2009, 11:09 AM	#58 (permalink)
par4bmw Enthusiast Member Join Date: Jan 2009 Location: Scottsdale, AZ Posts: 267 Drives: 09 370 M6 Touring/Sp Rep Power: 445	Looks awesome. Finally some slanted tips. Best looking Z so far IMHO. __________________ I tellya what, its got this s-mode thing down here...it moveees so incredibly... http://www.youtube.com/watch?v=Q7JsL...e=channel_page

05-20-2009, 12:38 PM	#59 (permalink)
Unicorn_blood Base Member Join Date: May 2009 Location: Milky Way Posts: 40 Drives: Enzo Rep Power: 16	DannyGT: I was wondering what front and rear arms are you going for? SPL all the way?

05-20-2009, 07:11 PM	#60 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 279	When I do it, yes it'll probably be SPL all around unless companies like cusco/whiteline start coming out with stuff... Shouldnt have an issue with SPL tho. __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RCZ's 370Z Journal.	RCZ	Member's 370Z Gallery	1743	08-09-2013 11:55 PM
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 05:44 PM
MCR 370Z Z34 Progress Update 12.23.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	29	12-26-2008 04:03 AM