So ashamed...

Jordo! · 04-05-2011, 03:08 PM

They should be here tomorrow or Thursday

brian0128 · 04-05-2011, 07:29 PM

Quote:

Originally Posted by Jordo!

It all just worked out, so I pounced on them

Congrats on the great looking wheels. I've been looking at that set on ebay!

Quote:

Originally Posted by azn370z

o too bad the offset isn't very good. If you use spacers you have to use version 1.

Is the offset not the same as the factory 19's? Can you give more detail about the spacers. What do you mean Version 1?

Jordo! · 04-05-2011, 07:51 PM

I believe it's same offset as factory, which is fine to me.

I might experiment with wheel spacers down the road, but it's not a priority.

FL 4Motion · 04-05-2011, 11:29 PM

congrats man, nice pickup. I think those s tune wheels are pretty damn good looking.

Jordo! · 04-06-2011, 01:19 AM

simota1 · 04-06-2011, 11:57 AM

congrats on the wheels man nice looking wheels

Jordo! · 04-06-2011, 01:19 PM

Thanks! Unless I miss the UPS man, will have them today and will get them mounted tomorrow

Jordo! · 04-06-2011, 04:25 PM

They are here!

Will be getting these mounted tomorrow afternoon -- pics to follow

Aside from looking nice, they shave 3+ lbs off of each corner too, so should result in improved responsiveness and braking as well

Isamu · 04-06-2011, 04:44 PM

Quote:

Originally Posted by Jordo!

because I'm ridicuously excited to be getting these!

I'm not ordinarily this materialistic... they're just fvcking wheels... and yet... I am sooooooooo excited to get them and put them on my car

OMG!! those are nice! congrats bro!

Waiz · 04-06-2011, 04:56 PM

Congrats!

They will look good with spacers and practically no one has them!

FL 4Motion · 04-06-2011, 08:17 PM

Quote:

Originally Posted by Jordo!

They are here!

Will be getting these mounted tomorrow afternoon -- pics to follow

Aside from looking nice, they shave 3+ lbs off of each corner too, so should result in improved responsiveness and braking as well

Can't wait to see these mounted on the car.

Jordo! · 04-06-2011, 11:16 PM

Good timing too... just picked up a screw in the tread of one of my tires, so would need to have it dismounted for a patch anyway

Thanks for the well wishes, folks -- I appreciate it

Will get pics posted sometime tomorrow

Waiz · 04-07-2011, 12:29 AM

I would say 10mm front spacer and 15-20mm rear is needed:

370Z Nismo S-Tune Wheels & Bodykit

Jordo! · 04-07-2011, 04:10 PM

Ta-daaaa!

Those rear wheels are pretty deep dish -- didn't realize that until they were mounted.

Waiz · 04-07-2011, 04:34 PM

Nice!!

04-05-2011, 03:08 PM	#16 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	They should be here tomorrow or Thursday __________________ Enjoy it. Destroy it.

04-05-2011, 07:51 PM	#18 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	I believe it's same offset as factory, which is fine to me. I might experiment with wheel spacers down the road, but it's not a priority. __________________ Enjoy it. Destroy it.

04-06-2011, 01:19 AM	#20 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	__________________ Enjoy it. Destroy it.

04-06-2011, 11:57 AM	#21 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	congrats on the wheels man nice looking wheels __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-06-2011, 01:19 PM	#22 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Thanks! Unless I miss the UPS man, will have them today and will get them mounted tomorrow __________________ Enjoy it. Destroy it.

04-05-2011, 11:29 PM	#19 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	congrats man, nice pickup. I think those s tune wheels are pretty damn good looking.

04-06-2011, 04:25 PM	#23 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	They are here! Will be getting these mounted tomorrow afternoon -- pics to follow Aside from looking nice, they shave 3+ lbs off of each corner too, so should result in improved responsiveness and braking as well __________________ Enjoy it. Destroy it.

04-06-2011, 04:56 PM	#25 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Congrats! They will look good with spacers and practically no one has them!

04-06-2011, 11:16 PM	#27 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Good timing too... just picked up a screw in the tread of one of my tires, so would need to have it dismounted for a patch anyway Thanks for the well wishes, folks -- I appreciate it Will get pics posted sometime tomorrow __________________ Enjoy it. Destroy it.

04-07-2011, 12:29 AM	#28 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	I would say 10mm front spacer and 15-20mm rear is needed: 370Z Nismo S-Tune Wheels & Bodykit

04-07-2011, 04:10 PM	#29 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Ta-daaaa! Those rear wheels are pretty deep dish -- didn't realize that until they were mounted. __________________ Enjoy it. Destroy it.

04-07-2011, 04:34 PM	#30 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Nice!!