Dembflyr's Journal

TheGreatOne · 05-23-2011, 03:03 PM

Nice thread, nice job on the stitching and headlights. I need some liquid courage to touch my headlights lol

Question on the Nismo springs

I bought some hoping they would give me a 0.4" drop as stated by some members...barely noticable but anything a little bit lower is better...some stated it raised the front...what happened with you?

Dembflyr · 05-23-2011, 03:16 PM

The headlights are intimidating until you do it. I've had mine apart 4 times now for paint and one led issue.

I didn't notice any change in ride height either way. The ride is much more firm. It takes some getting used to but overall it's a good mod for the money.

TheGreatOne · 05-23-2011, 03:28 PM

Awesome, thanks for the info, I don't mind the stiffer right, that will be great actually.

Dembflyr · 07-13-2011, 04:12 PM

Spent yesterday and this morning using the Mothers clay bar system and wax.

tweba09 · 07-13-2011, 04:45 PM

What width spacers did you go with front and rear??? Nice stance!

GetYourWheels · 07-13-2011, 05:20 PM

Looking clean!

Dembflyr · 07-13-2011, 05:37 PM

Quote:

Originally Posted by tweba09

What width spacers did you go with front and rear??? Nice stance!

I went with 15mm front and 20mm rear. That seems to be the standard sizes and it looks good.

Dembflyr · 10-25-2011, 09:18 AM

Finally got on a dyno this past weekend.

474 WHP 396 TQ @ 8 PSI

I hope to add a boost controller and an upgraded clutch this winter. At that point I will get back to a dyno and try a pull at about 11 psi. That should break the 500 mark.

Dembflyr · 12-10-2011, 02:15 PM

So my Z has been put away for less than two weeks and I can't stop thinking about what I want to do to it before next spring.

I already have plans for a new clutch and tires but a small incident has caused me to look at a few exterior mods and each one led to another thought.

The day after the dyno event, as I was washing my car, I noticed that the tail pipes were not center. As I went to move the muffler back I also noticed that the bumper was melted. Apparently when they strapped it down they must have pushed the tip into the bumper. I singed a form that released them from responsibility so I have to fix it myself. It's not real noticeable and I can fix it cheap.

So that's where I start to get carried away. Here is what I'm thinking.

I am going fix the melted part and paint the rear diffuser area satin black. I've seen this before on other members cars and I like the look.

But if I paint the rear then I have to paint the front fangs too. Again, seen it before and it looks good.

I've also been thinking about removing the slats in the grill opening. Not sure about this one yet as my intercooler would be more noticeable. I still have to decide to either put mesh in there or powder coat the intercooler.

Then the thought of adding a front lip comes in. I like the Ing's + the best but it's damn pricey for a lip. That and I'm sure that adding a lip will lead to changing the side skirts as well. Not sure if I want to spend that much more on the exterior. I'd rather spend it on performance mods.

The last thing I am thinking about is painting the roof gloss black. I have looked into vinyl wrap but I have no plans to sell the car so I don't care of its reversible. There is also a small blemish in the clear coat on the roof and paint would fix that.

I still have at least 12 weeks to think and save.

Dembflyr · 01-13-2012, 03:15 PM

I have some changes to the mod list.

I got an opportunity to get in on a new product before it gets released. I am going to have to put the clutch and boost controller on the back burner in order to make room in the budget for this one.

I am going to one of the first to sport the 3" version of the Fast Intentions TDX.

Should be ready by March.

Yet another reason to dream of spring.

Anyone want a slightly used Berk cat back?

Dembflyr · 03-05-2012, 11:07 PM

Installed my Swift springs along with my Sport shocks. I debated on keeping the Nismo shocks but I think I'll get a bit more money for the set than just the springs.

Here are a few pics:

If anyone wants some Nismo springs and shocks, let me know!

NISMO Springs and Shocks FOR SALE

Dembflyr · 03-14-2012, 11:53 PM

Plasti dipped the rear bumper. Tomorrow I am going to do the front fangs.

Boost_lee · 03-15-2012, 12:58 AM

hows the finish on the plastidip? Between flat and gloss? My rear vinyl overlay is starting to peel and I want to redo it.

Swifts looks great

Dembflyr · 03-15-2012, 01:06 AM

Quote:

Originally Posted by Boost_lee

hows the finish on the plastidip? Between flat and gloss? My rear vinyl overlay is starting to peel and I want to redo it.

Swifts looks great

I haven't had it out in the sun but I'd call it a satin finish. It looks like that part is made out of black ABS plastic. I'm very happy with how it came out.

Boost_lee · 03-15-2012, 01:32 AM

thanks, how many coats? thick or thin

05-23-2011, 03:03 PM	#31 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	Nice thread, nice job on the stitching and headlights. I need some liquid courage to touch my headlights lol Question on the Nismo springs I bought some hoping they would give me a 0.4" drop as stated by some members...barely noticable but anything a little bit lower is better...some stated it raised the front...what happened with you? __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

05-23-2011, 03:16 PM	#32 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	The headlights are intimidating until you do it. I've had mine apart 4 times now for paint and one led issue. I didn't notice any change in ride height either way. The ride is much more firm. It takes some getting used to but overall it's a good mod for the money. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

05-23-2011, 03:28 PM	#33 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 47 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	Awesome, thanks for the info, I don't mind the stiffer right, that will be great actually. __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

07-13-2011, 04:12 PM	#34 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Spent yesterday and this morning using the Mothers clay bar system and wax. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

07-13-2011, 04:45 PM	#35 (permalink)
tweba09 Base Member Join Date: May 2010 Location: Tampa, FL Posts: 32 Drives: 09 Sport/Touring Z Rep Power: 15	What width spacers did you go with front and rear??? Nice stance! __________________ 09' PW Touring with Sport Package 15% tint, 255/40 Front and 285/35 Rear Hankook V12's

07-13-2011, 05:20 PM	#36 (permalink)
GetYourWheels A True Z Fanatic Join Date: Feb 2011 Location: Southern California Posts: 3,816 Drives: 2011 BMW M3 Rep Power: 21	Looking clean! __________________ Email : Eddie@GetYourWheels.com \| Tel: (562)249-7184 \| Your Wheel Fitment Specialist / Wheel & Tire Deal via DM Top Tiers Dealers - Avant-Garde / Forgestar / Rohana / Stance / Vossen + More https://live.staticflickr.com/65535/...de6886f7a7.jpg

10-25-2011, 09:18 AM	#38 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Finally got on a dyno this past weekend. 474 WHP 396 TQ @ 8 PSI I hope to add a boost controller and an upgraded clutch this winter. At that point I will get back to a dyno and try a pull at about 11 psi. That should break the 500 mark. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

12-10-2011, 02:15 PM	#39 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	So my Z has been put away for less than two weeks and I can't stop thinking about what I want to do to it before next spring. I already have plans for a new clutch and tires but a small incident has caused me to look at a few exterior mods and each one led to another thought. The day after the dyno event, as I was washing my car, I noticed that the tail pipes were not center. As I went to move the muffler back I also noticed that the bumper was melted. Apparently when they strapped it down they must have pushed the tip into the bumper. I singed a form that released them from responsibility so I have to fix it myself. It's not real noticeable and I can fix it cheap. So that's where I start to get carried away. Here is what I'm thinking. I am going fix the melted part and paint the rear diffuser area satin black. I've seen this before on other members cars and I like the look. But if I paint the rear then I have to paint the front fangs too. Again, seen it before and it looks good. I've also been thinking about removing the slats in the grill opening. Not sure about this one yet as my intercooler would be more noticeable. I still have to decide to either put mesh in there or powder coat the intercooler. Then the thought of adding a front lip comes in. I like the Ing's + the best but it's damn pricey for a lip. That and I'm sure that adding a lip will lead to changing the side skirts as well. Not sure if I want to spend that much more on the exterior. I'd rather spend it on performance mods. The last thing I am thinking about is painting the roof gloss black. I have looked into vinyl wrap but I have no plans to sell the car so I don't care of its reversible. There is also a small blemish in the clear coat on the roof and paint would fix that. I still have at least 12 weeks to think and save. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

01-13-2012, 03:15 PM	#40 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	I have some changes to the mod list. I got an opportunity to get in on a new product before it gets released. I am going to have to put the clutch and boost controller on the back burner in order to make room in the budget for this one. I am going to one of the first to sport the 3" version of the Fast Intentions TDX. Should be ready by March. Yet another reason to dream of spring. Anyone want a slightly used Berk cat back? __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

03-05-2012, 11:07 PM	#41 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Installed my Swift springs along with my Sport shocks. I debated on keeping the Nismo shocks but I think I'll get a bit more money for the set than just the springs. Here are a few pics: If anyone wants some Nismo springs and shocks, let me know! NISMO Springs and Shocks FOR SALE __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

03-14-2012, 11:53 PM	#42 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Plasti dipped the rear bumper. Tomorrow I am going to do the front fangs. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

03-15-2012, 12:58 AM	#43 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	hows the finish on the plastidip? Between flat and gloss? My rear vinyl overlay is starting to peel and I want to redo it. Swifts looks great __________________ My TT Z

03-15-2012, 01:32 AM	#45 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	thanks, how many coats? thick or thin __________________ My TT Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reaper42's Journal	Reaper42	Member's 370Z Gallery	36	07-28-2011 04:54 PM
CrazyBeasty's Z34 Journal	crazybeasty	Member's 370Z Gallery	55	06-30-2011 07:31 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 04:19 PM
TipsZ Journal	TipsZ	Member's 370Z Gallery	33	12-07-2010 07:06 PM
Seether13's Journal	Seether13	Member's 370Z Gallery	9	11-21-2010 07:07 AM