Spohn's Journal

HKYStormFront · 03-31-2012, 02:39 PM

very nice sir!

Baer383 · 03-31-2012, 07:42 PM

Lip Lip where is the Lip!!!!!

SPOHN · 03-31-2012, 07:44 PM

Trying to get it done. Need to find a good way to bolt inside the fenders without affecting the wheel wells.

Baer383 · 03-31-2012, 07:48 PM

Quote:

Originally Posted by SPOHN

Trying to get it done. Need to find a good way to bolt inside the fenders without affecting the wheel wells.

Just use small screws

SPOHN · 03-31-2012, 07:55 PM

Seems like there going to go threw the plastic wheel well being it's tuck into the inside lip of the OEM front clip. I want to make sure I don't have to unbolt it everytime I remove it. BUt I haven't really looked at it. I just quickly glanced at it for a moment

LMBmikeZ · 04-01-2012, 08:51 AM

Nice so far spohn! Can't wait to see installed pics and pics of the new lip kit!

Calvin · 04-02-2012, 02:08 PM

where did you get your roll cage made at?!

SPOHN · 04-02-2012, 02:52 PM

Quote:

Originally Posted by Calvin

where did you get your roll cage made at?!

At Forged Performance here in GA. One of the few that can do it all in house.

Calvin · 04-02-2012, 03:09 PM

Quote:

Originally Posted by SPOHN

At Forged Performance here in GA. One of the few that can do it all in house.

May is ask for an estimate of how much it ran you ? Its fine if you don't wanna tell me haha

SPOHN · 04-06-2012, 04:35 PM

Stillen Brake Cooling Kit Installed (PICS)

SPOHN · 04-06-2012, 07:24 PM

Got the most out of these Carbotech XP8's. There some more life left but not for the track.

SPOHN · 04-07-2012, 08:08 PM

Well after two hard long days I got all my body mods on the car. It looks killer IMO. It really sets it of. Especially the black. It gives the car a better contrast. Course hard to tell from my crap camera.

But below you will see the Shine Auto Spec S kit, Stillen Canards, and the super sexy Carbon Signal Hood Vents that I had molded in. Boy they look killer. I bought the Shine kit in FRP and I plasti dipped it.

I went this route being I track my car a bit and I felt this was a great alternative than expensive paint that would get tore up my first day out which is coming soon enough. I can easily repair or redo on the fly with plasti dipped. Which has already shown me from three track days that it's very durable.

I also added the Stillen front canards for some front downforce for some extra bit threw the turns. Especially any off camber turns. As far as the rear I'm not sure what I'm going to add back there. I've been holding out for something that really grabs my attention.

Then finally the Carbon Signal Hood Vents. I'm so glad I got these. They are sharp as hell. Many props to the guys at AutoGlo. I know it had to be a pain to do but I'm happy to sport this rare piece. It sets it off in a good aggressive way. So hope you like and enjoy.

Baer383 · 04-07-2012, 08:25 PM

Looks good Chris I thought you did the back bumper like mine.

SPOHN · 04-07-2012, 08:27 PM

Quote:

Originally Posted by Baer383

Looks good Chris I thought you did the back bumper like mine.

No. I might end up doing that afterall until something else comes out. There only 200 bucks. It will give it a well rounded look.

Alchemy · 04-07-2012, 08:35 PM

Looking awesome Spohn. Love the hood. Car is looking badazz. How has it been treating you on the track?? Also, how do you like the Stillen brake cooling kit?? You are the first member I have seen install this.

03-31-2012, 02:39 PM	#541 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	very nice sir! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

03-31-2012, 07:42 PM	#542 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Lip Lip where is the Lip!!!!! __________________ 2013 ZL1 754 rwhp 747 rwtq

03-31-2012, 07:44 PM	#543 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Trying to get it done. Need to find a good way to bolt inside the fenders without affecting the wheel wells. __________________

03-31-2012, 07:55 PM	#545 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Seems like there going to go threw the plastic wheel well being it's tuck into the inside lip of the OEM front clip. I want to make sure I don't have to unbolt it everytime I remove it. BUt I haven't really looked at it. I just quickly glanced at it for a moment __________________

04-01-2012, 08:51 AM	#546 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Nice so far spohn! Can't wait to see installed pics and pics of the new lip kit! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

04-02-2012, 02:08 PM	#547 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 34 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 18	where did you get your roll cage made at?! __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

04-06-2012, 04:35 PM	#550 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Stillen Brake Cooling Kit Installed (PICS) __________________

04-06-2012, 07:24 PM	#551 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Got the most out of these Carbotech XP8's. There some more life left but not for the track. __________________

04-07-2012, 08:08 PM	#552 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Body Transformation Well after two hard long days I got all my body mods on the car. It looks killer IMO. It really sets it of. Especially the black. It gives the car a better contrast. Course hard to tell from my crap camera. But below you will see the Shine Auto Spec S kit, Stillen Canards, and the super sexy Carbon Signal Hood Vents that I had molded in. Boy they look killer. I bought the Shine kit in FRP and I plasti dipped it. I went this route being I track my car a bit and I felt this was a great alternative than expensive paint that would get tore up my first day out which is coming soon enough. I can easily repair or redo on the fly with plasti dipped. Which has already shown me from three track days that it's very durable. I also added the Stillen front canards for some front downforce for some extra bit threw the turns. Especially any off camber turns. As far as the rear I'm not sure what I'm going to add back there. I've been holding out for something that really grabs my attention. Then finally the Carbon Signal Hood Vents. I'm so glad I got these. They are sharp as hell. Many props to the guys at AutoGlo. I know it had to be a pain to do but I'm happy to sport this rare piece. It sets it off in a good aggressive way. So hope you like and enjoy. __________________ Last edited by SPOHN; 04-07-2012 at 08:48 PM.

04-07-2012, 08:25 PM	#553 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Looks good Chris I thought you did the back bumper like mine. __________________ 2013 ZL1 754 rwhp 747 rwtq

04-07-2012, 08:35 PM	#555 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Looking awesome Spohn. Love the hood. Car is looking badazz. How has it been treating you on the track?? Also, how do you like the Stillen brake cooling kit?? You are the first member I have seen install this. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holliday's Journal	Holliday	Member's 370Z Gallery	29	12-18-2011 08:26 AM
CrazyBeasty's Z34 Journal	crazybeasty	Member's 370Z Gallery	55	06-30-2011 06:31 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM
tao168's Journal	tao168	Member's 370Z Gallery	12	06-14-2010 08:19 AM
fairladyZ34's Journal	fairladyZ34	Member's 370Z Gallery	4	05-08-2010 06:10 PM