Nitrouz - The Evolution II.

Nitrouz · 01-15-2011, 04:15 AM

Quote:

Originally Posted by Ztoon

Hey Alex, looking good man!!

You're probably already aware, just thought I'd mention it anyway, the G3's are notorious for rubbing through the AC lines.
Rubber wrapped around with a zip-tie does the fix.

Wow no I didn't know that. But I guess I'll be wrapping it up sometime next week when I have time...probably when I install my test pipes and exhaust.

Thanks for the tip bro!

Gunzero · 01-15-2011, 04:54 AM

watching your z build gives me great pleasure

RCZ · 01-15-2011, 12:20 PM

Looks good. Needs alignment...the reason the steering feels so fast is because of all the negative camber you just added by lowering the car...

kevr6 · 01-15-2011, 01:05 PM

Cracks me up that there is no snow in that picture & we have snow here in ATL.

Nitrouz · 01-15-2011, 01:29 PM

Quote:

Originally Posted by RCZ

Looks good. Needs alignment...the reason the steering feels so fast is because of all the negative camber you just added by lowering the car...

Already aligned. Running -1.7 front and -2.0 rear camber. The "steering feels fast" I was referring to was the balanced feel of the car and the lack of body roll, not traction.

Nitrouz · 01-15-2011, 01:29 PM

Quote:

Originally Posted by kevr6

Cracks me up that there is no snow in that picture & we have snow here in ATL.

LOL...it was snowing here 2 days ago, but melted the next morning by rain, and we had an afternoon of sunshine yesterday.

djpathfinder · 01-15-2011, 02:08 PM

Quote:

Originally Posted by Nitrouz

Wow no I didn't know that. But I guess I'll be wrapping it up sometime next week when I have time...probably when I install my test pipes and exhaust.

Thanks for the tip bro!

There are two AC lines situated under the driver side intake tube near the front of the car (just behind the curved part of the tube and in front of the area where you had to make the cut in the plastic frame). A piece of rubber heater hose or similar zip tied around the AC lines (I did both of them just for safe measure) will prevent the rubbing. The AC lines are only on the driver side...none on the passenger side.

djpathfinder · 01-15-2011, 02:13 PM

Quote:

Originally Posted by Nitrouz

Already aligned. Running -1.7 front and -2.0 rear camber. The "steering feels fast" I was referring to was the balanced feel of the car and the lack of body roll, not traction.

Did you install front and rear camber kits too?

Nitrouz · 01-15-2011, 02:17 PM

Quote:

Originally Posted by djpathfinder

There are two AC lines situated under the driver side intake tube near the front of the car (just behind the curved part of the tube and in front of the area where you had to make the cut in the plastic frame). A piece of rubber heater hose or similar zip tied around the AC lines (I did both of them just for safe measure) will prevent the rubbing. The AC lines are only on the driver side...none on the passenger side.

Yup I know where they are...I installed the intake myself lol. I didn't know it would eat through the AC line. I'll take the bumper off and wrap it next week when my kit comes in and need to be installed.

Nitrouz · 01-15-2011, 02:18 PM

Quote:

Originally Posted by djpathfinder

Did you install front and rear camber kits too?

nope.

djpathfinder · 01-15-2011, 02:33 PM

Quote:

Originally Posted by Nitrouz

nope.

If not, then how did you have the front camber adjusted to -1.7? Did it just end up like that? When I did my alignment after dropping on coilovers, they couldn't adjust the rear to -2.0 without a camber kit. -2.4 was the most they could correct to with the OEM parts. That's why I was curious.

Nitrouz · 01-15-2011, 02:35 PM

Quote:

Originally Posted by djpathfinder

If not, then how did you have the front camber adjusted to -1.7? Did it just end up like that? When I did my alignment after dropping on coilovers, they couldn't adjust the rear to -2.0 without a camber kit. -2.4 was the most they could correct to with the OEM parts. That's why I was curious.

I'm not sure...it was just printed out to me at the alignment shop. I was pleasantly surprised too.

djpathfinder · 01-15-2011, 02:39 PM

Quote:

Originally Posted by Nitrouz

Yup I know where they are...I installed the intake myself lol. I didn't know it would eat through the AC line. I'll take the bumper off and wrap it next week when my kit comes in and need to be installed.

Sorry, didn't mean to sound like a nag, or make it seem like I don't think you know what you're doing. LOL. When I did my G3's I had to dig into some early G3 posts to find out about the problem and where it was located. From one of your earlier posts, it sounded like you didn't realize about the known problem, so I assumed you haven't come across the same posts. Thought I would give you the 50 words or less version to save you from having to dig and read. Again, I apologize for making that assumption.

Nitrouz · 01-15-2011, 02:41 PM

Quote:

Originally Posted by djpathfinder

Sorry, didn't mean to sound like a nag, or make it seem like I don't think you know what you're doing. LOL. When I did my G3's I had to dig into some early G3 posts to find out about the problem and where it was located. From one of your earlier posts, it sounded like you didn't realize about the known problem, so I assumed you haven't come across the same posts. Thought I would give you the 50 words or less version to save you from having to dig and read. Again, I apologize for making that assumption.

no not at all. I really appreciate your input!

djpathfinder · 01-15-2011, 02:43 PM

Quote:

Originally Posted by Nitrouz

I'm not sure...it was just printed out to me at the alignment shop. I was pleasantly surprised too.

Oh well, it worked out well for you then. The front camber is not adjustable with the OEM upper control arm. Unfortunately, my front camber was really out of whack (-1.0 on the left and -1.6 on the right) after lowering, so I ended up getting front and rear kits to bring my alignment to -2.2 front and -2.0 rear.

01-15-2011, 04:54 AM	#182 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 259	watching your z build gives me great pleasure __________________

01-15-2011, 01:05 PM	#184 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	Cracks me up that there is no snow in that picture & we have snow here in ATL. __________________ *Beware...* Daily Sliding In My ZLED!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evolution of the controller	Baker	The Lounge (Off Topic)	2	05-04-2011 07:50 PM
Coming soon akrapovic evolution exhaust system	SkyZ	Intake/Exhaust	26	12-01-2010 06:43 PM
Vol.5 Constant Evolution -- The Story Behind the Design of the New Z	kevin.z	Nissan 370Z General Discussions	1	05-29-2010 11:32 AM
where's that evolution of the z pic?	trema	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	03-17-2009 07:57 PM
Ferrari FXX Evolution Nürburgring	AK370Z	Other Vehicles	6	02-08-2009 03:12 AM

01-15-2011, 12:20 PM	#183 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Looks good. Needs alignment...the reason the steering feels so fast is because of all the negative camber you just added by lowering the car...