ClemsonWill's Journal

HKYStormFront · 01-03-2011, 09:38 AM

spacers........MEOW

ClemsonWill · 01-05-2011, 03:00 PM

I won't need them once the TEs go back on. Probably in the next few weeks. I need to install my sway bars first.

The count down is on for how long it will take me to smack my FI exhaust on a speed bump. Anyone care to put their bets in?

HKYStormFront · 01-05-2011, 05:20 PM

incoming obscure money pit reference: TWO WEEKS!

Jamaica · 01-05-2011, 05:40 PM

Quote:

Originally Posted by ClemsonWill

I won't need them once the TEs go back on. Probably in the next few weeks. I need to install my sway bars first.

The count down is on for how long it will take me to smack my FI exhaust on a speed bump. Anyone care to put their bets in?

You win some and lose some. I have scrapped it twice on cali roads kinda surprised since we have shitty roads. And my car is dropped two inch front and rear. You should be ok thou.

ClemsonWill · 01-12-2011, 07:50 AM

I've been slack about updating this thread. I need to go give the Z a bath and take some pictures. Just got my manfrotto tripod and head yesterday. I'm going to try some HDR pictures at some point.

Going to go get an alignment at lunch. Last place I tried couldn;t get the Z on the alignment machine. It's too low.

98intrigue · 01-12-2011, 08:57 AM

Quote:

Originally Posted by ClemsonWill

I've been slack about updating this thread. I need to go give the Z a bath and take some pictures. Just got my manfrotto tripod and head yesterday. I'm going to try some HDR pictures at some point.

Going to go get an alignment at lunch. Last place I tried couldn;t get the Z on the alignment machine. It's too low.

Nice tripod!

I need to wash my car and have an alignment done as well. Can you take care of it tomorrow for me during your lunch? Thanks.

ClemsonWill · 01-14-2011, 08:14 AM

Thanks!

After my 2.5 hour experience with getting the alignment done. I'll pass on helping anyone out with that.

My current alignment specs with the H&R springs if anyone is interested.

Front left
Camber -1.8
Toe 0.09

Front right
Camber -1.6
Toe 0.09

Rear left
Camber -1.6
Toe 0.20

Rear right
Camber -1.9
Toe 0.12

The front camber is a little out of stock spec but I don't have a front camber kit so I guess that's to be expected.

2415 miles

ClemsonWill · 01-29-2011, 08:59 AM

Ok, my car has been up on the sticks for the last several weeks but I finally got everything installed.

Eibach sway bar set.
Evo-r rear LED fog light (smoked)
BDL99 backup camera harness to function with the factory navigation.

Everything was extremely easy to install and I have had no issues. I'm really impressed with the sway bars. They make such difference. I have them set to the first hole in the front and the middle hole in the back. I'm tempted to switch it around and see what I like best. Maybe after I make it to an autocross and really but them through the ringer.

Volk wheels are back on for the first time since being lowered. I will be taking pictures soon.

2475 miles (1931 posts)

ClemsonWill · 01-30-2011, 06:40 PM

I took a few pictures today. They didn't come out like I had hoped. Hopefully I will be able to get out and take more soon.

Eibach sway bar pics

Matthew · 01-30-2011, 07:03 PM

looks good man! i cant wait to put the springson mine. i also got my Berk HFC today i got a small pile of stuffi need to put on.

how do you like the sway bars? i was thinking of getting the stillen ones.

Jamaica · 01-30-2011, 07:06 PM

Sexy sexy

SPOHN · 01-30-2011, 07:56 PM

Car looks great. For the alignment keep a eye on the toe specs though. Mainly the rear left.

Red__Zed · 01-30-2011, 11:14 PM

pics look great!

HKYStormFront · 01-30-2011, 11:53 PM

looks pretty good will. let me know the next time you are coming up this way

ClemsonWill · 01-31-2011, 07:43 AM

Thanks guys.

Quote:

Originally Posted by Matthew

looks good man! i cant wait to put the springson mine. i also got my Berk HFC today i got a small pile of stuffi need to put on.

how do you like the sway bars? i was thinking of getting the stillen ones.

The sway bars are awesome. The car seems to be much more planted in turns.

Quote:

Originally Posted by SPOHN

Car looks great. For the alignment keep a eye on the toe specs though. Mainly the rear left.

Yeah, it's pushing the limit.

Quote:

Originally Posted by HKYStormFront

looks pretty good will. let me know the next time you are coming up this way

I definitely will.

01-03-2011, 09:38 AM	#121 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	spacers........MEOW __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-05-2011, 03:00 PM	#122 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I won't need them once the TEs go back on. Probably in the next few weeks. I need to install my sway bars first. The count down is on for how long it will take me to smack my FI exhaust on a speed bump. Anyone care to put their bets in? __________________ Slightly modded

01-05-2011, 05:20 PM	#123 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	incoming obscure money pit reference: TWO WEEKS! __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-12-2011, 07:50 AM	#125 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I've been slack about updating this thread. I need to go give the Z a bath and take some pictures. Just got my manfrotto tripod and head yesterday. I'm going to try some HDR pictures at some point. Going to go get an alignment at lunch. Last place I tried couldn;t get the Z on the alignment machine. It's too low. __________________ Slightly modded

01-14-2011, 08:14 AM	#127 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	Thanks! After my 2.5 hour experience with getting the alignment done. I'll pass on helping anyone out with that. My current alignment specs with the H&R springs if anyone is interested. Front left Camber -1.8 Toe 0.09 Front right Camber -1.6 Toe 0.09 Rear left Camber -1.6 Toe 0.20 Rear right Camber -1.9 Toe 0.12 The front camber is a little out of stock spec but I don't have a front camber kit so I guess that's to be expected. 2415 miles __________________ Slightly modded Last edited by ClemsonWill; 01-14-2011 at 09:27 AM.

01-29-2011, 08:59 AM	#128 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	Ok, my car has been up on the sticks for the last several weeks but I finally got everything installed. Eibach sway bar set. Evo-r rear LED fog light (smoked) BDL99 backup camera harness to function with the factory navigation. Everything was extremely easy to install and I have had no issues. I'm really impressed with the sway bars. They make such difference. I have them set to the first hole in the front and the middle hole in the back. I'm tempted to switch it around and see what I like best. Maybe after I make it to an autocross and really but them through the ringer. Volk wheels are back on for the first time since being lowered. I will be taking pictures soon. 2475 miles (1931 posts) __________________ Slightly modded

01-30-2011, 06:40 PM	#129 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	I took a few pictures today. They didn't come out like I had hoped. Hopefully I will be able to get out and take more soon. Eibach sway bar pics __________________ Slightly modded

01-30-2011, 07:03 PM	#130 (permalink)
Matthew Track Member Join Date: Apr 2010 Location: Clemson, SC Posts: 519 Drives: Red Rocket Rep Power: 16	looks good man! i cant wait to put the springson mine. i also got my Berk HFC today i got a small pile of stuffi need to put on. how do you like the sway bars? i was thinking of getting the stillen ones. __________________

01-30-2011, 07:06 PM	#131 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Sexy sexy

01-30-2011, 07:56 PM	#132 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Car looks great. For the alignment keep a eye on the toe specs though. Mainly the rear left. __________________ Last edited by SPOHN; 01-30-2011 at 07:59 PM.

01-30-2011, 11:14 PM	#133 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	pics look great!

01-30-2011, 11:53 PM	#134 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	looks pretty good will. let me know the next time you are coming up this way __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Docaam's Z Journal	docaam	Member's 370Z Gallery	855	04-29-2016 05:34 PM
NewYorkJon's Journal	NewYorkJon34	Member's 370Z Gallery	236	12-28-2012 01:13 AM
schrute's journal	schrute	Member's 370Z Gallery	237	08-06-2011 08:47 PM
TipsZ Journal	TipsZ	Member's 370Z Gallery	33	12-07-2010 07:06 PM
G37HKS's Journal..	G37sHKS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	07-09-2010 08:58 AM