RCZ's 370Z Journal.

wstar · 04-13-2009, 12:18 AM

Quote:

Originally Posted by RCZ

Yeah It costs around $150 to install the pulley haha.

More info this weekend.

$150 ?

The only special tool required is the puller, and you can buy those brand new for $35 or so. DIY

RCZ · 04-13-2009, 12:26 AM

I did one once before and it was with people who had done it before. I remember having to do all sorts of stuff..but I don't remember them clearly enough so this one, Im going to let my mech do.

RCZ · 04-28-2009, 06:15 PM

Headers/HFC's installed.

CrownR426 · 04-28-2009, 07:54 PM

Quote:

Originally Posted by RCZ

Headers/HFC's installed.

Video Update us!

RCZ · 04-28-2009, 09:44 PM

Not getting the car back for a few days.

RCZ · 04-29-2009, 05:45 PM

I got my results and its about the same as everyone else.

310WHP 228WHP

I am seeing if they have any pictures of the whole graph.

I am a little worried about the torque number, but one thing that should be taken into account is that the car didn't have ANY time to adjust to the new mods. That dyno pull was done immediately after install. I have a feeling I will pick up at least 5whp after it gets used to the new mods. Then another 10-15whp with a tune. My Goal was 330whp. It is going to be damn close.

Also this is WITHOUT the pulley.

semtex · 04-29-2009, 05:54 PM

Nice results! Yeah, I want to see the torque curve.

ChrisSlicks · 04-29-2009, 09:38 PM

Noticed your peak has now moved up slightly to 7500 which is interesting. The fact that your torque number hasn't moved much isn't all that surprising as most of your improved power is likely coming in the higher rpms beyond the torque peak. So your torque curve improved just not the torque peak.

Great results!

RCZ · 05-04-2009, 07:10 PM

Yeah the car feels different now, I need to get it redynoed. Feels stronger than when I picked it up for sure.

Namir · 05-06-2009, 01:12 AM

Quote:

Originally Posted by RCZ

Yeah the car feels different now, I need to get it redynoed. Feels stronger than when I picked it up for sure.

Hopefully that stronger feeling is coming from some more torque gains once the car adapted to the mods. I'm looking forward to the dyno and hopefully some new videos for us to enjoy

I really wish this car had more torque. 300WHP is plenty but I really wish it had around 260TQ.

ChrisSlicks · 05-06-2009, 10:41 AM

Quote:

Originally Posted by Namir

I really wish this car had more torque. 300WHP is plenty but I really wish it had around 260TQ.

So basically you're asking for more HP at lower RPM.

RCZ · 05-06-2009, 05:49 PM

Don't we all?

Next mods are Flywheel, Test pipes, Tune, Carbotech brake pads/fluid/ss lines, KW V3's, control arms, Swaybars, chassis braces, wheels/tires

wstar · 05-06-2009, 07:11 PM

Quote:

Originally Posted by RCZ

Don't we all?

Next mods are Flywheel, Test pipes, Tune, Carbotech brake pads/fluid/ss lines, KW V3's, control arms, Swaybars, chassis braces, wheels/tires

Oh my, information overload!

What chassis braces are you looking at? Those Nismo ones?

Where are you getting the SS brake lines? I hadn't seen any in 370Z-specific lengths on anyone's site yet.

travisjb · 05-06-2009, 07:18 PM

prob this one http://www.the370z.com/double-down-m...html#post67909

semtex · 05-06-2009, 08:00 PM

Yeah I just ordered the brace myself.

04-29-2009, 05:54 PM	#67 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Nice results! Yeah, I want to see the torque curve. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

05-06-2009, 08:00 PM	#75 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 54 Posts: 5,995 Drives: People to drink Rep Power: 32	Yeah I just ordered the brace myself. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edmonton Journal Review of the 370Z	BanningZ	Nissan 370Z General Discussions	13	08-09-2009 06:44 PM

04-13-2009, 12:26 AM	#62 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	I did one once before and it was with people who had done it before. I remember having to do all sorts of stuff..but I don't remember them clearly enough so this one, Im going to let my mech do.

04-28-2009, 06:15 PM	#63 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Headers/HFC's installed.

04-28-2009, 09:44 PM	#65 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Not getting the car back for a few days.

04-29-2009, 05:45 PM	#66 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	I got my results and its about the same as everyone else. 310WHP 228WHP I am seeing if they have any pictures of the whole graph. I am a little worried about the torque number, but one thing that should be taken into account is that the car didn't have ANY time to adjust to the new mods. That dyno pull was done immediately after install. I have a feeling I will pick up at least 5whp after it gets used to the new mods. Then another 10-15whp with a tune. My Goal was 330whp. It is going to be damn close. Also this is WITHOUT the pulley.

04-29-2009, 09:38 PM	#68 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Noticed your peak has now moved up slightly to 7500 which is interesting. The fact that your torque number hasn't moved much isn't all that surprising as most of your improved power is likely coming in the higher rpms beyond the torque peak. So your torque curve improved just not the torque peak. Great results!

05-04-2009, 07:10 PM	#69 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Yeah the car feels different now, I need to get it redynoed. Feels stronger than when I picked it up for sure.

05-06-2009, 05:49 PM	#72 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Don't we all? Next mods are Flywheel, Test pipes, Tune, Carbotech brake pads/fluid/ss lines, KW V3's, control arms, Swaybars, chassis braces, wheels/tires

05-06-2009, 07:18 PM	#74 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	prob this one http://www.the370z.com/double-down-m...html#post67909