After months of anticipation, my Berk cat back exhaust and hi flow cats finally came in the mail a week or so back. This last Friday I scheduled to have
|
|
LinkBack | Thread Tools | Display Modes |
08-22-2010, 07:41 PM | #1 (permalink) |
Base Member
Join Date: Nov 2009
Location: Louisville, KY
Posts: 143
Drives: 09 Nissan 370Z PW M6
Rep Power: 15 |
Terbo's 370 Dyno day/Berk exhaust install!
After months of anticipation, my Berk cat back exhaust and hi flow cats finally came in the mail a week or so back. This last Friday I scheduled to have everything installed and dyno'd before and after the install at my local tuner shop, Robert's Imports (big shout-out to them!) I woke up bright and early Friday, my dad swung by and we loaded up the new exhaust in it's ginormous box and headed out to the shop. We get there, unload everything and within 10 minutes my car is strapped to their DynoDynamics dyno. We did three runs to establish a nice baseline.
Each run overlaid the previous almost exactly, and the average peak power was 258 whp. Next my car was taken off the dyno and put up on the rack in order to get a set of new pipes. Getting on the rack. Under the beast. Stock exhaust. All stock. While Bill, the shop manager, was working on removing all the stock components, I tore open the new goodies. New high-flow cats. Berk Cat Back Exhaust all laid out and still wrapped. It's Christmas! Old and busted. After a good 1/2 hour of wailing away on the stupid cats, Bill finally got them out. For some reason Nissan's engineers are morons and didn't design this with maintenance in mind so it makes removing the stock cats very very difficult. I.E. rounding off a bolt or two. Bill happy the stock cats are finally off. New Berk Hi-Flow cats on! X Pipe installed. Berk CBE installed! New hotness! While it was still in the air, I checked all the stuff I've read of people giving them grief. I measured the gap between the tips and the bumper and checked the hangers. Everything checked out perfectly. The gap between the tips and bumpers was exactly the same, not even a 32nd difference. Beautiful fit and finish! Pure sexiness. Now that the exhaust was installed, it was time to strap it back on the dyno and see what it would do. This first run was a bit surprising, only putting down 266whp for a gain of +8whp peak. Bill thought this odd and noticed that the coolant temps were not up to proper operating temps yet, so we let it run on the dyno for a few minutes while it warmed up. Once it was nice and warm, Bill let her rip once more. This run was just as Bill suspected, the power increased to 270whp. The next two runs were done back to back. These two runs produced exactly the same graphs. Peak power went up to 273whp (okay okay, 272.8, but it's close enough we're going to call it 273.) +14whp on a dynodynamics, not bad methinks. In case you were wondering, the DynoDynamics dynos do read lower than Mustang dynos and Dynojets. Typically the Mustang reads 14% higher while the Dynojet will read 18% higher. +14whp! So that's my dyno day. Bill said that after a few drives that the ECU would relearn my driving and the car may pick up a few more whp even. I have taken video of driving the car with stock exhaust and with the new Berk CBE and cats, I just have yet to get around to uploading it. I'll be sure to update this thread when I do As for the sound? It's orgasmic. So very sexy. I can actually feel and hear the car now, unlike when it was stock. When cruising it can be quiet and unsuspecting, but when you lay the hammer down it just roars. I love it! |
08-22-2010, 07:52 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Feb 2009
Location: SATX
Posts: 2,813
Drives: 09 370Z TT 6MT
Rep Power: 29 |
Thanks for taking the time to do the baseline runs. Great vids, and makes the stock exhaust seem like a joke
Was the ECU reset while the Berk was installed? I'm pretty confident that you will pick up a bit more hp after a few hundred miles of driving. |
08-22-2010, 08:18 PM | #3 (permalink) |
A True Z Fanatic
Join Date: May 2009
Location: Seneca Il
Posts: 1,374
Drives: 10 Civic EX Sedan
Rep Power: 219 |
Thanks for the write up!
DAN
__________________
-My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily |
08-22-2010, 08:52 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Mar 2010
Location: San Diego
Posts: 1,125
Drives: Cars...
Rep Power: 17 |
Thank you for the write up and the testing, give it a couple days and it will feel stronger!
__________________
somewhat-journal-thingy |
08-22-2010, 09:24 PM | #6 (permalink) |
Base Member
Join Date: Nov 2009
Location: Louisville, KY
Posts: 143
Drives: 09 Nissan 370Z PW M6
Rep Power: 15 |
Boost Lee, no the ECU was not reset. That's part of the reason why we were only seeing 8 whp immediately after installing the new exhaust.
Thanks everyone! I'll have comparison videos up soon, most likely tomorrow! |
08-23-2010, 04:55 AM | #7 (permalink) |
Administrator
Join Date: Sep 2008
Location: NJ
Posts: 9,930
Drives: 09 370Z MB Sports M6
Rep Power: 10 |
wow.. Very nice numbers. Exhaust looks great too. It was def worth the wait.
__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive. |
08-23-2010, 04:57 PM | #10 (permalink) |
Base Member
Join Date: Nov 2009
Location: Louisville, KY
Posts: 143
Drives: 09 Nissan 370Z PW M6
Rep Power: 15 |
In recent news, today I met up with a buddy and ran his modded ISF. He said he put down 327whp on a DynoJet so we figured it would be a fun race. We did some runs, from 40 rolls and 60 rolls. The 40 rolls usually ended with his rear bumper at my front bumper. The 60 rolls had his rear tires at my front bumper at the end. Then we did another and he turned on the bottle and put bus lengths on me
|
08-29-2010, 07:37 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Mar 2010
Location: GUAHAN
Posts: 1,198
Drives: To & From then Back
Rep Power: 3399 |
Wow...a V8 with a bottle...Now that's just straight up bullying....Wonder how it would pan out in the 1/4 mile from dead stop...motor vs motor...No bottle
__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 |
11-14-2010, 03:50 AM | #14 (permalink) |
Base Member
Join Date: Jul 2010
Location: US NEW MEXICO
Posts: 43
Drives: Z06/370 Z/Tundra
Rep Power: 15 |
ordering parts for my nismo, berk cats and injen intake any idea how much power i should pick up? and what do you guys mean when ask if ecu was reset?how do you reset it? any feedback is appreciated hanks/////
|
11-16-2010, 12:31 AM | #15 (permalink) |
Base Member
Join Date: Nov 2009
Location: Louisville, KY
Posts: 143
Drives: 09 Nissan 370Z PW M6
Rep Power: 15 |
Sorry, can't say .
The stock-look was a big part of it for me. I'm not a fan of the angled exhausts, too ricey for my tastes. Also, the sound of the Berk is amazing. It truly cannot be captured on video perfectly. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
anyone dyno with gen 3 and berk cbe?? | blastman5 | Engine & Drivetrain | 0 | 08-10-2010 01:44 AM |
CEL after STILLEN G3 intakes, headers, exhaust and BERK HFC install | evrumohr | Intake/Exhaust | 5 | 07-17-2010 05:18 PM |
Berk hfc/berk cbe vs berk hfc/stillen exhaust | xbigb4ller69z | Intake/Exhaust | 21 | 04-11-2010 04:35 AM |
A not so successful Berk Exhaust install... | JB1 | Intake/Exhaust | 132 | 03-26-2010 02:23 PM |
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install | Jon@Altered | Intake/Exhaust | 18 | 07-03-2009 03:21 AM |