Project Z

Baer383

You can prime it if you want but it is not absolutely necessary ,the adhesion promoter is important b/c the easy off opens the pores and will expose raw plastic.

__________________
2013 ZL1

754 rwhp 747 rwtq

Nut_N_Much

The factory base coat is a clear paint with blue tent and metallic fakes. You have to prim or it will show through to the plastic. Soda blaster is getting thought the thick clear coat i put on, don't want to use chemicals. If the shrouds get F'ed up I have to buy new light. Weird thing is its just that one light.

Should have them all stripped by Sat & ready for paint.

Will use the chemical on a fresh set of lights, good idea.. Thanks boss.

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html

Baer383

What do I know ,I did mine that way and I work in a body shop

This is main reason why I don't post that much on the forum ,I give correct advice and I'm told I'm wrong.

Do it any way you like my lights you great.

__________________
2013 ZL1

754 rwhp 747 rwtq

Mr&Mrs

Relax brother everyone thinks what they know is best. Nothing wrong with that either. We are all proud of what we do, how we do it, and the path that got us there.

I think this is just a misunderstanding anyway. He is trying to remove all the old paint and there is a lot of it. He plans on trying your method on a new set of lights not some that have been done multiple times already like mine. We have been talking in PM's also he likes your method.

I have learned a lot from your posts Baer dont be stingy Also dont freak out if people disagree its human nature.

__________________
Project Z <--Click - Check out the link too many mods to list!

Nut_N_Much

Holy crap, tell someone thank you and they are right and they **** all over you! Rob your translation was spot on, I had too much clear coat on these lights. I did use oven cleaner to get the clear coat off and soda blasted to get the primer and base off. They are almost ready, spent today sanding smooth. I need smooth out the dimples tomorrow and should have them painted by tomorrow night. Anyways here is an updated pic:





Baer if you want to talk 760-207-4684, I'm not an email/PM kinda guy any recommendations just call.


.


.

__________________

Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html
http://www.the370z.com/diy-section-d...-w-videos.html