Project Z

98intrigue · 08-28-2013, 09:40 PM

Hey rob, Horsepower for Hope is coming up...Saturday, September 14th in Sarasota. It would be great to meet up again.

Mr&Mrs · 08-28-2013, 11:12 PM

Quote:

Originally Posted by GaleForce

Very nice

Did you get it fixed?

This is an older pic, I got a new lip, the chip in the bumper and small crack in the fender needs repaired still. I am going to try and drive it to a body shop over the next three days. That is if the clutch allows me to do so.

Quote:

Originally Posted by 98intrigue

Hey rob, Horsepower for Hope is coming up...Saturday, September 14th in Sarasota. It would be great to meet up again.

Is it an early show? I work the night before and that night. If I could get there early spend an hour or two then head home for a nap its possible...

Mr&Mrs · 09-02-2013, 11:01 PM

Well something under the paint in my driver side headlight started to bubble (or fish eye) a little while back. Joe is going to help me out and fix them for me. I plan on changing things up a bit while we are inside again. Let me know what you guys think and any ideas or opinions.

1) The better looking Halos (xB I think)
2) Repaint Housing
3) Repaint Shrouds
4) Tie in black accent somewhere
5) Extra blue L.E.D for my demon eyes 1 isnt bright enough

So my idea is to use little to no black this time. I really like the color of MBlue with no clear coat on it. So I am going to do one of two combinations, Flat MBlue housing with Cleared MBlue Shrouds, or vice versa. I feel like I need a black accent because that has been my theme with the whole car, but im not sure where to add it. I was thinking leaving a black Halo around the actual Halo light on the large shroud and keep the blinker shroud all black. I have other ideas for the black too but im undecided.

Reference of Flat MBlue:

docaam · 09-03-2013, 02:04 AM

Nice to go a bit different route

Mr&Mrs · 09-10-2013, 03:19 PM

Headlights are out waiting for Joe to pick them up. Here comes crunch time as usual with me....I need all my new clutch components (still waiting on back ordered Zspeed CSC) installed, headlights, and very very minor body work to fix my encounter with a moron. I need it all done by the end of the month, why? Because I want to go to ZNats!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

speedfreek · 09-10-2013, 03:41 PM

Good luck man! Hope you get it everything done and buttoned back up before end of the month. I have few things left to do as well. Clocks ticking....

OMGWTFBBQ · 09-10-2013, 08:24 PM

You should do flat MB housing, gloss MB projector shrouds, black reflector (the piece that used to be amber).

Just a random question, but where is the paint bubbling up?

Nut_N_Much · 09-11-2013, 08:39 PM

The paint bubbled in random places.. It didn't look like it was from heat damage. I used an off the shelf sandable primer with his REA Code from AutoTouch up. I shouldn't have bubbled at all.

Same combination on 5 sets I have done. This go around I have Auto Touch up everything. Primer, Base, Clear all from same source and designed to work together.

It still has me concerned. When we painted the lights had been cleaned and dried. His shroud looks like chicken pox's. Sorry buddy, I'll get the fixed up, waiting on soda blaster I ordered the same day I picked the lights up.

LED's are here so were ready to start..

Luciano13 · 09-13-2013, 04:33 PM

Now u can buy a toy to go with your toy

Only need to colour match lol

Mr&Mrs · 09-13-2013, 05:25 PM

Repped andplease give me details on where the heck I can buy that. Im sure we will have some paint left from my lights to color match the model

Quote:

Originally Posted by Luciano13

Now u can buy a toy to go with your toy

Only need to colour match lol

Luciano13 · 09-13-2013, 05:37 PM

Here is the link, NISSAN ƒtƒFƒAƒŒƒfƒBZi2009 Z34j ƒ[ƒ‹ ƒGƒAƒƒXƒ^ƒCƒ‹ (ƒ~ƒjƒJ[) ¤•i‰æ‘œ1
If you can translate.....u can buy

I found it searching for new goodies for my car and thought of you right away

It looks like an actual model u build yourself.....

Luciano13 · 09-13-2013, 05:39 PM

did some more searching for ya, here is where u can buy it
NISSAN

Mr&Mrs · 09-13-2013, 05:46 PM

Dang now I need more help ordering it

Quote:

Originally Posted by Luciano13

did some more searching for ya, here is where u can buy it
NISSAN

Luciano13 · 09-13-2013, 06:04 PM

Quote:

Originally Posted by Mr&Mrs

Dang now I need more help ordering it

send it to Alcheng

maybe he can translate

Ty99 · 09-13-2013, 07:52 PM

Quote:

Originally Posted by Luciano13

send it to Alcheng

maybe he can translate

it says sold out...let me know if I can help you!

08-28-2013, 09:40 PM	#826 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	Hey rob, Horsepower for Hope is coming up...Saturday, September 14th in Sarasota. It would be great to meet up again. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

09-02-2013, 11:01 PM	#828 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Well something under the paint in my driver side headlight started to bubble (or fish eye) a little while back. Joe is going to help me out and fix them for me. I plan on changing things up a bit while we are inside again. Let me know what you guys think and any ideas or opinions. 1) The better looking Halos (xB I think) 2) Repaint Housing 3) Repaint Shrouds 4) Tie in black accent somewhere 5) Extra blue L.E.D for my demon eyes 1 isnt bright enough So my idea is to use little to no black this time. I really like the color of MBlue with no clear coat on it. So I am going to do one of two combinations, Flat MBlue housing with Cleared MBlue Shrouds, or vice versa. I feel like I need a black accent because that has been my theme with the whole car, but im not sure where to add it. I was thinking leaving a black Halo around the actual Halo light on the large shroud and keep the blinker shroud all black. I have other ideas for the black too but im undecided. Reference of Flat MBlue: docaam, Nut_N_Much and Luciano13 like this. __________________ Project Z <--Click - Check out the link too many mods to list!

09-03-2013, 02:04 AM	#829 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 29	Nice to go a bit different route Mr&Mrs likes this. __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline Last edited by docaam; 09-04-2013 at 06:30 AM.

09-10-2013, 03:19 PM	#830 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Headlights are out waiting for Joe to pick them up. Here comes crunch time as usual with me....I need all my new clutch components (still waiting on back ordered Zspeed CSC) installed, headlights, and very very minor body work to fix my encounter with a moron. I need it all done by the end of the month, why? Because I want to go to ZNats!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! tibal, GaleForce, Nut_N_Much and 1 others like this. __________________ Project Z <--Click - Check out the link too many mods to list!

09-10-2013, 03:41 PM	#831 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	Good luck man! Hope you get it everything done and buttoned back up before end of the month. I have few things left to do as well. Clocks ticking.... __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

09-10-2013, 08:24 PM	#832 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	You should do flat MB housing, gloss MB projector shrouds, black reflector (the piece that used to be amber). Just a random question, but where is the paint bubbling up? Nut_N_Much likes this.

09-11-2013, 08:39 PM	#833 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	The paint bubbled in random places.. It didn't look like it was from heat damage. I used an off the shelf sandable primer with his REA Code from AutoTouch up. I shouldn't have bubbled at all. Same combination on 5 sets I have done. This go around I have Auto Touch up everything. Primer, Base, Clear all from same source and designed to work together. It still has me concerned. When we painted the lights had been cleaned and dried. His shroud looks like chicken pox's. Sorry buddy, I'll get the fixed up, waiting on soda blaster I ordered the same day I picked the lights up. LED's are here so were ready to start.. Mr&Mrs likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

09-13-2013, 05:37 PM	#836 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 245	Here is the link, NISSAN ƒtƒFƒAƒŒƒfƒBZi2009 Z34j ƒ[ƒ‹ ƒGƒAƒƒXƒ^ƒCƒ‹ (ƒ~ƒjƒJ[) ¤•i‰æ‘œ1 If you can translate.....u can buy I found it searching for new goodies for my car and thought of you right away It looks like an actual model u build yourself..... __________________ http://www.the370z.com/members-370z-...lid-red-z.html

09-13-2013, 05:39 PM	#837 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 245	did some more searching for ya, here is where u can buy it NISSAN __________________ http://www.the370z.com/members-370z-...lid-red-z.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a project car.	bigaudiofanat	The Lounge (Off Topic)	19	07-03-2010 11:14 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 10:01 AM
Project: Mothra	dalparadise	Nissan 370Z General Discussions	71	04-17-2010 02:31 PM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 03:00 AM