Project Z

Baer383 · 09-14-2013, 08:37 PM

If you use easy off oven cleaner (with the yellow top) to remove the chrome you won't have that problem.

Mr&Mrs · 09-14-2013, 08:48 PM

Quote:

Originally Posted by Baer383

If you use easy off oven cleaner (with the yellow top) to remove the chrome you won't have that problem.

He got a soda blaster to try out. If you use that oven cleaner do you then have to worry about getting all of that residue off as well? What is the best way to clean the clear lens on the inside same stuff? Or will it etch it?

Baer383 · 09-14-2013, 08:53 PM

Quote:

Originally Posted by Mr&Mrs

He got a soda blaster to try out. If you use that oven cleaner do you then have to worry about getting all of that residue off as well? What is the best way to clean the clear lens on the inside same stuff? Or will it etch it?

Just spray it on keep it covered ,1 can is good for both lights I forget the time check the can I think it is about 20-30 minutes then just wash them off and they should be clear with a yellow haze then prep for paint no primer some adhesion promoter would be a good idea.

As far as the outer clear lens windex a clean rag ,compressed air to remove any lint and a flash light to look thru the plastic lens to ck how clear it is.

Mr&Mrs · 09-14-2013, 08:57 PM

Quote:

Originally Posted by Baer383

Just spray it on keep it covered ,1 can is good for both lights I forget the time check the can I think it is about 20-30 minutes then just wash them off and they should be clear with a yellow haze then prep for paint no primer some adhesion promoter would be a good idea.

Ok, so no primer but a plastic adhesion promoter. Thanks man!

Mr&Mrs · 09-15-2013, 03:45 PM

Little teaser.....I think this is the first time this has been done on a 370z maybe not. It is awesome none the less. Already had Demon Eyes now its going to be dual Demon Eyes!

simota1 · 09-21-2013, 05:37 PM

what did you use to fill those dimples?

Nut_N_Much · 09-21-2013, 10:19 PM

Quote:

Originally Posted by simota1

what did you use to fill those dimples?

Lizard Skin, 3M body filler..

simota1 · 09-21-2013, 11:06 PM

can i just use 3m body filler i dont think they sell lizard skin on guam... i plan on doing a couple z's out here

Riptide67 · 09-29-2013, 02:52 PM

Love your cars! So tasteful!

Nut_N_Much · 10-01-2013, 07:10 PM

Update:
Finally got all the body work done to the light shrouds, worked all day today and got them painted. Will clear coat tomorrow and paint the black trim. As soon as its all dry, I'll seal them up..

Luciano13 · 10-01-2013, 07:37 PM

Quote:

Originally Posted by Nut_N_Much

Update:
Finally got all the body work done to the light shrouds, worked all day today and got them painted. Will clear coat tomorrow and paint the black trim. As soon as its all dry, I'll seal them up..

That looks sick!!!

Mr&Mrs · 10-01-2013, 11:33 PM

Man I am usually patient about this kind of stuff but I want to see these done so bad! Keep up the good work Joe!

Nut_N_Much · 10-02-2013, 07:59 AM

Quote:

Originally Posted by Mr&Mrs

Man I am usually patient about this kind of stuff but I want to see these done so bad! Keep up the good work Joe!

Has your body work come back yet? PM you image

Luciano13 · 10-02-2013, 03:09 PM

Quote:

Originally Posted by Nut_N_Much

Has your body work come back yet?

Awwww the waiting game...... Is there any better feeling

Mr&Mrs · 10-02-2013, 05:50 PM

Quote:

Originally Posted by Nut_N_Much

Has your body work come back yet? PM you image

I didnt want to try and hold the front end together without the lights so I didnt take it back yet. Once I get the lights in I will be dropping it off. Not in a hurry though I blew money left and right last month. Still need the clutch put in too. I was hoping you and Kelly may want to do that for me if all goes well with his.

I am getting crown moulding put in the entire down stairs plus staircase and loft area, finshed off ordering furniture, and got a quote for a PVC fence the wife wants (so I will be doing that too). My god I could build my motor and upgrade turbos to .86 with all that money. Oh well got to do things for her too. Plus I want to start having parties in the new crib

09-14-2013, 08:37 PM	#1 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	If you use easy off oven cleaner (with the yellow top) to remove the chrome you won't have that problem. __________________ 2013 ZL1 754 rwhp 747 rwtq

09-15-2013, 03:45 PM	#5 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Little teaser.....I think this is the first time this has been done on a 370z maybe not. It is awesome none the less. Already had Demon Eyes now its going to be dual Demon Eyes! __________________ Project Z <--Click - Check out the link too many mods to list!

09-21-2013, 05:37 PM	#6 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	what did you use to fill those dimples? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

09-21-2013, 11:06 PM	#8 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	can i just use 3m body filler i dont think they sell lizard skin on guam... i plan on doing a couple z's out here __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

09-29-2013, 02:52 PM	#9 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	Love your cars! So tasteful! __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

10-01-2013, 11:33 PM	#12 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Man I am usually patient about this kind of stuff but I want to see these done so bad! Keep up the good work Joe! __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a project car.	bigaudiofanat	The Lounge (Off Topic)	19	07-03-2010 10:14 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 09:01 AM
Project: Mothra	dalparadise	Nissan 370Z General Discussions	71	04-17-2010 01:31 PM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 02:00 AM