Project Z

speedfreek · 06-07-2013, 09:36 AM

Quote:

Originally Posted by Mr&Mrs

What did you do with all the hoses?

With the Fast Intentions you have to lose the evap box as well. Tony supplies you with a heat wrap for the hoses. Should be a non-issue.

Mr&Mrs · 06-07-2013, 11:32 AM

Quote:

Originally Posted by speedfreek

With the Fast Intentions you have to lose the evap box as well. Tony supplies you with a heat wrap for the hoses. Should be a non-issue.

Thats odd I just took the F.I system off the car and its still in there. Is there more than one style?

speedfreek · 06-07-2013, 11:38 AM

I think you can get by without removing it but in the instructions it says to remove the black shield to give it more room. The heat wrap was provided with zip ties for the lines. I removed mine just for more clearance.

Mr&Mrs · 06-07-2013, 11:41 AM

Oh ok, yeah I took the shield off too. It is still hitting it though. I was actually hoping it would melt to the right spot lol

omm370z · 06-07-2013, 09:22 PM

Quote:

Originally Posted by Mr&Mrs

Well the shipper called me to set up delivery..................and I said no thanks I will come pick it up after work. This system is sooo sick, it looks like its going to be loud as hell too. Setting it up for a Friday install......man the wait is going to suck!

I will just leave these here............

This must be very light. When i picked up the R1 from bulletproof ware house. you could literally lift up the exhaust with 1 finger. Amazing

Mr&Mrs · 06-08-2013, 01:41 PM

Well I have a couple videos im uploading now, but holy cow is youtube slow. It is probably going to take 10 hours for the 5 clips to upload.

I also have bad news and a video of my issue. White smoke is pouring out of the exhaust at idle. Once I get moving you cant see it and if I floor it nothing comes out heavy. Only sitting still or not moving and popping the throttle a little.

In the video it is only coming out of the drivers side but when I stopped the video I blipped the gas and it started to come out the passenger side too. I just shut it down after that.

Oil looks good not milky or watery, coolant level is good, temps were perfect, no funny noises, good AFR's, and power was still there. Could be a head gasket, valve springs, cracked block (hope not!), etc. Just odd that everything "looks" ok.....any ideas or thoughts? I guess I will be taking it to the shop sometime this week.

Mr&Mrs · 06-08-2013, 01:52 PM

I used a free video editing thing for this clip and it had a youtube button it uploaded fast. Here is the video sorry for the water mark but it was free! Lol

simota1 · 06-08-2013, 03:54 PM

man that thing is throaty as hell!!! hella mean tone.... and you didnt even rev it but i got goosebumps

speedfreek · 06-08-2013, 03:58 PM

It is likely just the new exhaust burning what's inside the pipes during fabrication. You should be ok. Need to heat cycle the exhaust and it should go away.

Mr&Mrs · 06-08-2013, 06:23 PM

That is a nice thought but I dont think im that lucky. Wouldnt it be doing it from the start when I first got it installed?

Here are a couple more videos nothing great just testing out the camera.

Quote:

Originally Posted by speedfreek

It is likely just the new exhaust burning what's inside the pipes during fabrication. You should be ok. Need to heat cycle the exhaust and it should go away.

OMGWTFBBQ · 06-09-2013, 03:34 AM

White smoke is normal. It's just the exhaust burning off chemicals during production process. It kind of reminds me of weird smelling marshmallows. Like burnt ones.

98intrigue · 06-09-2013, 11:59 AM

^what he said

Mr&Mrs · 06-09-2013, 12:51 PM

Well that's a little comforting but I think I'm going to use a block seal tester before I drive it anymore.

Nut_N_Much · 06-09-2013, 09:50 PM

The sound of the new exhaust did something to me !!!! Its awesome..

Mr&Mrs · 06-10-2013, 02:04 AM

Some of your pics crack me up, that looks like Mr. Bean and Smeagol from Lord of the Rings had a baby

06-07-2013, 11:38 AM	#783 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	I think you can get by without removing it but in the instructions it says to remove the black shield to give it more room. The heat wrap was provided with zip ties for the lines. I removed mine just for more clearance. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

06-07-2013, 11:41 AM	#784 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Oh ok, yeah I took the shield off too. It is still hitting it though. I was actually hoping it would melt to the right spot lol __________________ Project Z <--Click - Check out the link too many mods to list!

06-08-2013, 01:41 PM	#786 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Well I have a couple videos im uploading now, but holy cow is youtube slow. It is probably going to take 10 hours for the 5 clips to upload. I also have bad news and a video of my issue. White smoke is pouring out of the exhaust at idle. Once I get moving you cant see it and if I floor it nothing comes out heavy. Only sitting still or not moving and popping the throttle a little. In the video it is only coming out of the drivers side but when I stopped the video I blipped the gas and it started to come out the passenger side too. I just shut it down after that. Oil looks good not milky or watery, coolant level is good, temps were perfect, no funny noises, good AFR's, and power was still there. Could be a head gasket, valve springs, cracked block (hope not!), etc. Just odd that everything "looks" ok.....any ideas or thoughts? I guess I will be taking it to the shop sometime this week. __________________ Project Z <--Click - Check out the link too many mods to list!

06-08-2013, 01:52 PM	#787 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	I used a free video editing thing for this clip and it had a youtube button it uploaded fast. Here is the video sorry for the water mark but it was free! Lol Reaper42, docaam, FairladyZ10PG and 3 others like this. __________________ Project Z <--Click - Check out the link too many mods to list!

06-08-2013, 03:54 PM	#788 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	man that thing is throaty as hell!!! hella mean tone.... and you didnt even rev it but i got goosebumps GaleForce likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-08-2013, 03:58 PM	#789 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	It is likely just the new exhaust burning what's inside the pipes during fabrication. You should be ok. Need to heat cycle the exhaust and it should go away. simota1 likes this. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

06-09-2013, 03:34 AM	#791 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	White smoke is normal. It's just the exhaust burning off chemicals during production process. It kind of reminds me of weird smelling marshmallows. Like burnt ones. sfearl1 likes this.

06-09-2013, 11:59 AM	#792 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	^what he said __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

06-09-2013, 12:51 PM	#793 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Well that's a little comforting but I think I'm going to use a block seal tester before I drive it anymore. __________________ Project Z <--Click - Check out the link too many mods to list!

06-09-2013, 09:50 PM	#794 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	The sound of the new exhaust did something to me !!!! Its awesome.. Mr&Mrs likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

06-10-2013, 02:04 AM	#795 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	Some of your pics crack me up, that looks like Mr. Bean and Smeagol from Lord of the Rings had a baby Nut_N_Much likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a project car.	bigaudiofanat	The Lounge (Off Topic)	19	07-03-2010 11:14 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 10:01 AM
Project: Mothra	dalparadise	Nissan 370Z General Discussions	71	04-17-2010 02:31 PM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 03:00 AM