Project Z

swiss370Z · 12-23-2012, 09:00 AM

A great pair!
The two "Z" s look fabulous!

W.O.W. 370Z · 12-23-2012, 09:12 AM

Very nice man congrats!!!!

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Mr&Mrs · 12-23-2012, 06:57 PM

The Blue is on BC BR coils, ane Silver is on Nismo Springs.

Unique_Z · 12-24-2012, 11:19 AM

Nice Zele kitted Z buddy! and damn tight fender as well!

Dembflyr · 12-26-2012, 08:04 PM

Not sure how I mised all these updates.

Car looks great Rob. Those wheels are just about perfect.

How is she running for you?

Mr&Mrs · 12-26-2012, 09:35 PM

I was wondering why I had not heard from you! Running pretty good. The other night I took her out and done a third gear pull onto the interstate and I hit 12.9 AFR at WOT so I shut it down. It was like 50 degrees out, and the increase in power sucking in that cold air was night and day to the hot temps I ran it in a few months back. After dinner I done a pull in third and fourth and it was fine 11.5 at WOT. I have no clue why I see these odd lows and highs at random (remember in some hot temps I saw 10.5).

I just hit 600 miles since I got her and have enjoyed every minute of it. Now that the wheels are on the car I may not get the APR wing, not sure why, but the sport wing flows perfect with the wheels IMO. I may use that money towards a Zele Exhaust system, because I keep hitting the F.I on everything and scratching them up. If I do a different exhaust I will get it retuned as well because of the size difference and goofy AFR numbers at random.

Next year if I still want to go crazy I may build the motor, im following a few builds right now to figure out the exact route I want to go. 600WHP on pump gas will be my goal. Which should be do-able if I rebuild these turbos with the .86 internals.

I know shes mine now but I hope you like the path I have taken with her

Quote:

Originally Posted by Dembflyr

Not sure how I mised all these updates.

Car looks great Rob. Those wheels are just about perfect.

How is she running for you?

Dembflyr · 12-26-2012, 10:28 PM

It is possible that that gauge needs to be recalibrated. The manual that I sent you will tell how to do it.
Have you done a log with Cypher?
That will give you the reading of the factory wide band. It is much easier to read after than trying to drive and look at the gauge.
I do remember that Sam told me that the factory ones do read 1.0 off (not sure if it was rich or lean) so take that into account.

I agree about the spoiler. Looks clean with those wheels. And if you can swing it that Zele exhaust would be SICK!

Glad you're having fun with her.

And yes, I approve.

Mr&Mrs · 12-26-2012, 11:04 PM

I have not done a log yet. Actually do not even know how to do it. If I ever get time to sit down and study something besides work stuff I will look into it.

On another note all this work just allowed me to order this

Mark said it should be here by February, im glad he stays up late so I can spend money

Quote:

Originally Posted by Dembflyr

It is possible that that gauge needs to be recalibrated. The manual that I sent you will tell how to do it.
Have you done a log with Cypher?
That will give you the reading of the factory wide band. It is much easier to read after than trying to drive and look at the gauge.
I do remember that Sam told me that the factory ones do read 1.0 off (not sure if it was rich or lean) so take that into account.

I agree about the spoiler. Looks clean with those wheels. And if you can swing it that Zele exhaust would be SICK!

Glad you're having fun with her.

And yes, I approve.

omm370z · 12-28-2012, 09:13 AM

Quote:

Originally Posted by Mr&Mrs

I have not done a log yet. Actually do not even know how to do it. If I ever get time to sit down and study something besides work stuff I will look into it.

On another note all this work just allowed me to order this

Mark said it should be here by February, im glad he stays up late so I can spend money

OH RIGHT

I got berks+Y with res+the exhaust and it is cool because it growls when the rpm goes up but as dembflyr said it will be quiet but! if you don't mind there is not reason for it. I think later i will buy a Y pipe with none resonator.

I will post a video when i get back the car from the shop (2013)

Nut_N_Much · 12-29-2012, 08:50 AM

Quote:

Originally Posted by Mr&Mrs

This is so sexy I can't stop looking at it.. I just wanted to repost \.

happytheman · 12-26-2012, 11:20 PM

Those forgestars look super! I'm reeeeally interested to see a rolling shot with those. Can you capture one for me? This might be my new set of wheels!

Mr&Mrs · 12-26-2012, 11:32 PM

I will do my best to get it taken care of for you. My only day off is Saturday and I look pretty booked already. Maybe on the 1st I can make it happen.

Quote:

Originally Posted by happytheman

Those forgestars look super! I'm reeeeally interested to see a rolling shot with those. Can you capture one for me? This might be my new set of wheels!

Nut_N_Much · 12-28-2012, 07:35 AM

You have a good eye for photo's. I'm putting the Spec-R Srings on today, will get you the stock set up back to you over the weekend.

Thanks again brother..

Dembflyr · 12-28-2012, 08:12 AM

Can you get that exhaust non resonated? It's gonna be real quiet. My Berk was almost stock sounding after the TT kit was on. That's why I went with the non resonated FI.

GaleForce · 12-28-2012, 09:20 AM

Quote:

Originally Posted by Dembflyr

Can you get that exhaust non resonated? It's gonna be real quiet. My Berk was almost stock sounding after the TT kit was on. That's why I went with the non resonated FI.

^^Yep, I'm getting an exhaust shop to rework my Berk Exhaust so it doesn't have resonators... I need that growl.

The Zele exhaust is so nice looking and really does finish off the rear bumper. It's worth asking if they can build one without resonators

12-23-2012, 09:00 AM	#1 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	A great pair! The two "Z" s look fabulous! __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

12-23-2012, 06:57 PM	#3 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	The Blue is on BC BR coils, ane Silver is on Nismo Springs. __________________ Project Z <--Click - Check out the link too many mods to list!

12-24-2012, 11:19 AM	#4 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	Nice Zele kitted Z buddy! and damn tight fender as well! __________________ My Z Build UniqueZ

12-26-2012, 08:04 PM	#5 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 17	Not sure how I mised all these updates. Car looks great Rob. Those wheels are just about perfect. How is she running for you? __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

12-26-2012, 10:28 PM	#7 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 17	It is possible that that gauge needs to be recalibrated. The manual that I sent you will tell how to do it. Have you done a log with Cypher? That will give you the reading of the factory wide band. It is much easier to read after than trying to drive and look at the gauge. I do remember that Sam told me that the factory ones do read 1.0 off (not sure if it was rich or lean) so take that into account. I agree about the spoiler. Looks clean with those wheels. And if you can swing it that Zele exhaust would be SICK! Glad you're having fun with her. And yes, I approve. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

12-23-2012, 09:12 AM	#2 (permalink)
W.O.W. 370Z A True Z Fanatic Join Date: Mar 2010 Location: Miami Posts: 1,757 Drives: 2010 Touring Sport Z Rep Power: 20	Very nice man congrats!!!! Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

12-26-2012, 11:20 PM	#11 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Those forgestars look super! I'm reeeeally interested to see a rolling shot with those. Can you capture one for me? This might be my new set of wheels! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

12-28-2012, 07:35 AM	#13 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	You have a good eye for photo's. I'm putting the Spec-R Srings on today, will get you the stock set up back to you over the weekend. Thanks again brother.. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

12-28-2012, 08:12 AM	#14 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 17	Can you get that exhaust non resonated? It's gonna be real quiet. My Berk was almost stock sounding after the TT kit was on. That's why I went with the non resonated FI. __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a project car.	bigaudiofanat	The Lounge (Off Topic)	19	07-03-2010 10:14 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 09:01 AM
Project: Mothra	dalparadise	Nissan 370Z General Discussions	71	04-17-2010 01:31 PM
Project Mu	MursePaolo	Brakes & Suspension	4	07-01-2009 02:00 AM