JC's Turbo Tales and Musings

jchammond · 01-13-2021, 05:36 AM

This was first Z being worked on & then before you know it....instant CF

Spooler · 01-13-2021, 08:38 AM

Quote:

Originally Posted by jchammond

It’s functional; will be piping up the Daikin mini-split this weekend

Just haven’t insulated anything yet

Does that fan blow toward your house? If so this may be a problem with airflow for the unit outside cooling the condenser. I have had that issue before when I was in the AF.

jchammond · 01-14-2021, 03:39 AM

Quote:

Originally Posted by Spooler

Does that fan blow toward your house? If so this may be a problem with airflow for the unit outside cooling the condenser. I have had that issue before when I was in the AF.

Yes it will; shouldn’t be an issue with this setup...as always will be in the shade & Hvac guy said it looked great.
Also it’s within drawing specs on mounting

Inside part will blow downward; unsure if it oscillates or not...but don’t want it aimed at roll up door

I’ll know in a couple days

jchammond · 01-16-2021, 09:59 PM

HVAC fully functional in garage now

Gonna be working on a few shelves & removing some clutter beginning tomorrow

Still planning to have Z on lift by end of January

jchammond · 01-21-2021, 04:08 AM

Couple more parts ordered:

Soho’s aluminum upper plenum

Specialty Z’s forced induction Flex Fuel Kit
E-content gauge (blue)
HKS Racing M Series Spark Plugs
Omni 4 Bar MAP Sensor
HOBB Switch for dual pump setup
GTR ignition coils

jchammond · 01-23-2021, 03:55 AM

Forgot to list boost controller

jchammond · 01-23-2021, 04:33 AM

Update on Turbo/Exhaust:
Turbo’s arrived at FI this week & so did the mufflers for the 3” kit,
Shouldn’t be long before everything is shipped

jchammond · 01-30-2021, 03:07 AM

A few parts showed up yesterday afternoon

More pieces to the puzzle

jwick · 01-30-2021, 10:02 AM

Quote:

Originally Posted by jchammond

A few parts showed up yesterday afternoon

More pieces to the puzzle

Good parts. I looked into using Zeitronix for my entire gauge setup when I did the car. In hindsight I wish I had since the LCD screen went out on my Greddy Multi-Gauge. I also like the Profec. I have the original running mine.

We’re the coil packs bad or you just replacing all the OEM stuff too?

Rusty · 01-30-2021, 03:03 PM

When is this showing up?

jchammond · 01-31-2021, 04:07 AM

Quote:

Originally Posted by jwick

Good parts. I looked into using Zeitronix for my entire gauge setup when I did the car. In hindsight I wish I had since the LCD screen went out on my Greddy Multi-Gauge. I also like the Profec. I have the original running mine.

We’re the coil packs bad or you just replacing all the OEM stuff too?

They weren’t bad, just 125k miles & Seb recommended the GTR ones over the 370 ones

Said he’s seen some of the stock ones misfire, when potentially running over 20# boost...idk

Beings he’s gonna be tuning; I got parts he recommended

jchammond · 01-31-2021, 04:10 AM

Quote:

Originally Posted by Rusty

When is this showing up?

Haven’t shipped it out yet, been dinking around

With the extra expenses lately :icon14, probably will be mid February to early March,,,as the turnaround time isn’t bad on these.

gbrettin · 02-02-2021, 07:41 AM

Errr mah gerd. you just buy all these parts up front to feel the full force of the pain. lol I like to spread my pain out to a dull lingering pain over years.

Hotrodz · 02-02-2021, 08:40 AM

Quote:

Originally Posted by gbrettin

Errr mah gerd. you just buy all these parts up front to feel the full force of the pain. lol I like to spread my pain out to a dull lingering pain over years.

My project initially would have been about $20k but because it has taken more than two years you can triple that. Death by a 60,000 paper cuts!

jwick · 02-02-2021, 12:39 PM

Quote:

Originally Posted by Hotrodz

My project initially would have been about $20k but because it has taken more than two years you can triple that. Death by a 60,000 paper cuts!

Dude...The ‘while I’m in there’ and ‘it’ll never be easier while that’s off’ add-ons kill a car build budget.

01-16-2021, 09:59 PM	#109 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	HVAC fully functional in garage now Gonna be working on a few shelves & removing some clutter beginning tomorrow Still planning to have Z on lift by end of January FL 4Motion, Rusty, Hotrodz and 7 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-21-2021, 04:08 AM	#110 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Couple more parts ordered: Soho’s aluminum upper plenum Specialty Z’s forced induction Flex Fuel Kit E-content gauge (blue) HKS Racing M Series Spark Plugs Omni 4 Bar MAP Sensor HOBB Switch for dual pump setup GTR ignition coils FL 4Motion, gbrettin, Rusty and 7 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-23-2021, 04:33 AM	#112 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Update on Turbo/Exhaust: Turbo’s arrived at FI this week & so did the mufflers for the 3” kit, Shouldn’t be long before everything is shipped FL 4Motion, gbrettin, JARblue and 6 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-30-2021, 03:03 PM	#115 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	When is this showing up? FL 4Motion, gbrettin, Hotrodz and 5 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-02-2021, 07:41 AM	#118 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Errr mah gerd. you just buy all these parts up front to feel the full force of the pain. lol I like to spread my pain out to a dull lingering pain over years. FL 4Motion, JARblue, Rusty and 7 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Musings of a new (to me) Z owner.	Fasttimes	New 370Z Owner	28	06-11-2019 01:47 AM
Single Turbo to Twin Turbo Upgrade?	Terminal Doc	Forced Induction	15	08-16-2018 05:15 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 10:04 PM
[FOR SALE] HKS 6th Gen EVC Turbo Boost Controller and PLX Devices Turbo Sensors Gauges	modme	Parts for sale (Private Classifieds)	17	03-20-2014 05:03 PM
Sum Forty Tales From The Afterlives	SgtGoldy	The Lounge (Off Topic)	0	03-26-2013 07:46 AM