2014 370z Weekend Warrior Journey

BettyZ

I ended up using a wrench instead of a socket. Worked far better.

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

alanyluan

First track day of the year in the books. Overall, a TON of fun pushing this car so hard on track and learning the limits of the car. Also, I'm really glad I was able to hit the track (The Ridge) last year in completely stock form to see just how different the car feels/compares after these recent modifications. Both my girlfriend and I drove and split 7 20 minute sessions in the beginner group. Given my limited experience, we handled ourselves pretty well with the rest of the pack. Our main goals were consistency, finding the line, and generally just learn the car.

As far as how the car held up, I went into this track day fully aware that the brakes were going to be the most obvious limitation. My first two sessions, I'd almost say I was too paranoid of my brakes that I wasn't nearly aggressive enough in the brake zones and thus not driving the car nearly as hard as it could be driven. By the third session, I essentially threw caution to the wind and finally got the confidence to be hard on the brakes and started seeing a TON more progression with braking later and shortening lap times. Started having LOTS of fun and getting consistent times (and honestly surprised the brakes were holding up). I continued to make sure to use each cool down lap appropriately, parking the car with no brakes, popping the hood/brake+clutch fluid cover. We made it through 6 sessions pushing the brakes hard and it wasn't until about session 5 that we were getting some bad vibration when braking, but no noticeable fade. Session 7 for our group got merged with Group B so less time for the car to cool (20 min break vs. 40 min). Immediately into turn 1 going around 110+mph and slamming on the brakes I noticed substantial brake fade. I took the remainder of the lap at 50-60%. Luckily it was the last session of the day and most drivers had gone home already, so plenty of room between each car. At Turn 13, with no cars around and a corner with loads of run-off, I applied the brakes and the pedal went completely to the floor and went off course (in the safest manner I could). Despite how safe it was, I still will never forget that moment.

So with all of that, definitely going to be upgrading the brakes sooner than I had anticipated. I know I could probably just get away with upgrading the pads, but at this point, I feel better just going straight to the Akebonos as I've been eyeing them for a while anyways. I was really hoping these two pot calipers would at least last for 3-4 track days this summer but I just don't want to attend another track day if I have any sort of doubt that my brakes are not up to the task. Next, I'd love to get a go-pro and start collecting more data/info on my driving habits to continue improving and being consistent (telemetry would be awesome but need to do some more research). Lots of fun had and despite the confidence crushing brake fade in the last session, the day went extremely well all things considered. Let the rabbit hole continue as I contemplate selling a kidney for proper big brake kit.. or a 991.2 GT3.

Rusty

Here's a thread to help you with the GoPro. Also get a polarized lens filter for it.

Official GO PRO HD 370Z Owners Thread:Mounting Tips, tricks, Pictures, Videos Inside

There is other cameras out there too. I used both a GoPro Hero 3 Black and a Garmin Vribe.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

alanyluan

The fun continues (and so does this rabbit hole). Finally got my hands on some Akebonos, Carbotech Xp10/8, and Z1 SS lines. Had to wait a while since Z1 have one of the calipers on backorder indefinitely so went with CZP. I still have some of the "plain" titanium shims off Ebay on the way and then bed the brakes and good to go. Will definitely hold off on more mods until I can get some more seat time!

Some random questions...
- Do I need to bother with grease/lubricants for the pads and shims? Not a daily driver and I don't mind the squeal.
- If/When I inevitably fry the dust boots, am I still good without them?

alanyluan

Awesome evening track event at The Ridge. Got to meet another member here, Sam, with his Nismo Z. Had fun tailing each other and learning the track and we both got bumped to Group B! Just a couple pictures I snapped. Now I need someone who can drive my car so I can take pictures...

alanyluan

Experiencing fitment issues with Whiteline front sway bar bushing brackets. Has anyone experienced this or have suggestions? The holes don't line up/are too narrow to fit over the bolts. It's close but the bracket stops and won't fit right at the threads.

Would it be unwise to just bore the existing holes out just a bit larger or would that compromise the bracket?

Rusty

You can put the bracket in a vise and use a hammer to bend it out a little. It wouldn't take much to do. From the picture, it looks like it is bent too much. and you need about 1/32" for it to fit.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

alanyluan

I didn't think about that.. Thanks for the suggestion, will give it a shot and see what happens!

Rusty

You could also put the bracket on the floor and hit it with the hammer too.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html