M.Bonanni's 370Z Project "Born Again"

ChrisSlicks · 02-15-2010, 06:50 PM

Quote:

Originally Posted by M.Bonanni

Oh I know. I SHOULD at least bleed the brakes after every event, but I am lazy lol.

I just remembered though, I did swap the fluid when I changed the lines in September. Forgot about that.

Nah, every event is overkill, save that for the teams with a full crew. Speed bleeders make it pretty easy but it's a pain to get to the inside bleeder especially on the rear.

speedworks · 02-15-2010, 08:24 PM

Quote:

Originally Posted by ChrisSlicks

Nah, every event is overkill, save that for the teams with a full crew. Speed bleeders make it pretty easy but it's a pain to get to the inside bleeder especially on the rear.

I don't know, if I was you I would do it every weekend. I do it every weekend in my race car, or for a single test day (probably more like what you are doing) right after the test day.

M.Bonanni · 02-17-2010, 06:50 PM

Some quick photos after some prep for an upcoming car show this Sunday.

Finally put my EVO-R side blades back on the car after one got violently ripped off during an off-track excursion at Buttonwillow back in November. The one that came off the car is virtually un-damaged which is awesome seeing that it was also run over by my back tire after being ripped from the side skirt. I think the look of the side blades really helps with the wing and the overall look of the car, way more so than they did without the wing I think. Now I just need a front lip to finish the "time attack" look.

Also lowered the car about 1/2" all around and re-adjusted my alignment back to street specs so the wheels look more flush. Found some 6mm spacers in my garage from my 350Z so I threw those on the rear wheels too.

Also obviously removed all of the stickers. I think it looks soooooo much better without stickers, but unfortunately that is one of the drawbacks to having sponsors. I have an appointment with 702 Graphics tomorrow to get the car re-stickered, but this time it will be a much more minimalist look compared to my last few vinyl layouts.

The decals is the last thing that will happen to the car before Sunday's Hellaflush 3.5 / Berk Technology Charity Ride-A-Long event. My StopTech slotted front rotors and replacement OEM rear rotors are due to arrive Monday so those will go on next week. I also want to get around to installing the SPC Performance rear toe bolts I have had sitting in my garage forever. That will allow me to lower the car some more in the rear while still being able to keep within factory toe specs. I still have an NST pulley kit in my parts bin that I have yet to install as well. Not going to tackle that one myself though without a lift so thats still on hold.

vipor · 02-17-2010, 07:16 PM

You need a gunmetal tow hook. That or black. The red doesn't go with anything.

The wheel setup does look nice though. Hell, I think you could still push the rears out a bit lol.

I've always been a fan (if you have to do it) with either a vertical line near the forward door seam or across the bottom. Typically when they are just somewhat noticeable. Like a lighter silver for your car. Not sure if your sponsors would be okay with the "ghost" look for their logo though heh.

M.Bonanni · 02-17-2010, 07:30 PM

Quote:

Originally Posted by vipor

You need a gunmetal tow hook. That or black. The red doesn't go with anything.

The wheel setup does look nice though. Hell, I think you could still push the rears out a bit lol.

I've always been a fan (if you have to do it) with either a vertical line near the forward door seam or across the bottom. Typically when they are just somewhat noticeable. Like a lighter silver for your car. Not sure if your sponsors would be okay with the "ghost" look for their logo though heh.

Yeah thinking of powdercoating the red part of the tow hook either black or my new accent color that will be on my car via the vinyl. Red is not in the works though, red/black/silver is soooo 2007.

Yeah I wouldn't do the "ghost" look for my sponsors. Even though most, if not all of them probably wouldn't say anything about it, I am better to my sponsors than that lol. A sponsor's logo on my car is a main staple of my sponsorships. If a company is willing to invest in me and help me out, the least I can do is make sure their logo is easily readable.

The color scheme of the car is actually chosen by my title sponsor Berk Technology this year. It will match the new look of their time attack BMW 135i which I will be driving for them in time attack. Its not a traditional "safe" color scheme though so don't get excited. I think it will look cool, it will be more along the lines of what I like to call a "Ken Block" style color scheme. You know how I love that neon.

vipor · 02-17-2010, 07:34 PM

Yeah his cars always looked sweet. The only qualms I ever had was the overuse of the DC logo as a pattern or texture.

I'm

to see how yours turns out. If it's the same dark gold color that's on your Bimmer then it'll definitely be a crapshoot but I'll stay positive

GT Motoring · 02-17-2010, 07:48 PM

Quote:

Originally Posted by M.Bonanni

Yeah thinking of powdercoating the red part of the tow hook either black or my new accent color that will be on my car via the vinyl. Red is not in the works though, red/black/silver is soooo 2007.

Or you could ask your awesome sponsor for a black one to swap out.

M.Bonanni · 02-17-2010, 07:49 PM

Quote:

Originally Posted by vipor

Yeah his cars always looked sweet. The only qualms I ever had was the overuse of the DC logo as a pattern or texture.

I'm

to see how yours turns out. If it's the same dark gold color that's on your Bimmer then it'll definitely be a crapshoot but I'll stay positive

Rest assured that when I reference Ken Block's cars I am talking about his color choices. Usually pretty monotone with one or two bright "neon" colors. My car will not feature any patterns or textures, just simple one color logos with another color border. And no, the black/gold scheme of the Berk car in 2009 is gone so gold will not be making its way onto my car.

M.Bonanni · 02-17-2010, 07:51 PM

Quote:

Originally Posted by GT Motoring

Or you could ask your awesome sponsor for a black one to swap out.

Thats true, but I am trying to save you $$$ here. I will let you pay the powdercoating bill if you want.

Paul@AEperformance · 02-17-2010, 07:56 PM

looking clean Mike,

Good to see the beast back on the streets =)

ChrisSlicks · 02-17-2010, 08:11 PM

Crap, I should have made a deal to be a used parts supplier sponser.

phelan · 02-17-2010, 08:13 PM

Quote:

Originally Posted by M.Bonanni

Red is not in the works though, red/black/silver is soooo 2007.

nothin' wrong with red! lol

M.Bonanni · 02-17-2010, 08:14 PM

Quote:

Originally Posted by ChrisSlicks

Crap, I should have made a deal to be a used parts supplier sponser.

Gimme my money back and I'll put a sticker of your face on the car. I have no shame.

ChrisSlicks · 02-17-2010, 08:18 PM

Quote:

Originally Posted by m.bonanni

gimme my money back and i'll put a sticker of your face on the car. I have no shame. :d

LOL, I'm rather tempted.

M.Bonanni · 02-17-2010, 08:20 PM

Quote:

Originally Posted by phelan

nothin' wrong with red! lol

Sure, the red/black/combo is still cool. Your iPod Shuffle isn't out of date yet either, don't worry.

02-17-2010, 06:50 PM	#93 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1321	Some quick photos after some prep for an upcoming car show this Sunday. Finally put my EVO-R side blades back on the car after one got violently ripped off during an off-track excursion at Buttonwillow back in November. The one that came off the car is virtually un-damaged which is awesome seeing that it was also run over by my back tire after being ripped from the side skirt. I think the look of the side blades really helps with the wing and the overall look of the car, way more so than they did without the wing I think. Now I just need a front lip to finish the "time attack" look. Also lowered the car about 1/2" all around and re-adjusted my alignment back to street specs so the wheels look more flush. Found some 6mm spacers in my garage from my 350Z so I threw those on the rear wheels too. Also obviously removed all of the stickers. I think it looks soooooo much better without stickers, but unfortunately that is one of the drawbacks to having sponsors. I have an appointment with 702 Graphics tomorrow to get the car re-stickered, but this time it will be a much more minimalist look compared to my last few vinyl layouts. The decals is the last thing that will happen to the car before Sunday's Hellaflush 3.5 / Berk Technology Charity Ride-A-Long event. My StopTech slotted front rotors and replacement OEM rear rotors are due to arrive Monday so those will go on next week. I also want to get around to installing the SPC Performance rear toe bolts I have had sitting in my garage forever. That will allow me to lower the car some more in the rear while still being able to keep within factory toe specs. I still have an NST pulley kit in my parts bin that I have yet to install as well. Not going to tackle that one myself though without a lift so thats still on hold. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

02-17-2010, 07:16 PM	#94 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	You need a gunmetal tow hook. That or black. The red doesn't go with anything. The wheel setup does look nice though. Hell, I think you could still push the rears out a bit lol. I've always been a fan (if you have to do it) with either a vertical line near the forward door seam or across the bottom. Typically when they are just somewhat noticeable. Like a lighter silver for your car. Not sure if your sponsors would be okay with the "ghost" look for their logo though heh. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

02-17-2010, 07:34 PM	#96 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Yeah his cars always looked sweet. The only qualms I ever had was the overuse of the DC logo as a pattern or texture. I'm to see how yours turns out. If it's the same dark gold color that's on your Bimmer then it'll definitely be a crapshoot but I'll stay positive __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

02-17-2010, 07:56 PM	#100 (permalink)
Paul@AEperformance The370Z.com Sponsor Join Date: Aug 2009 Location: At the Track Posts: 194 Drives: All sorts of Fast! Rep Power: 16	looking clean Mike, Good to see the beast back on the streets =) __________________ http://i10.photobucket.com/albums/a1...Ejdmbanner.gif

02-17-2010, 08:11 PM	#101 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Crap, I should have made a deal to be a used parts supplier sponser.